Polyhouse material · Uttar Pradesh
Polyhouse material for farms in Kanpur
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For most Kanpur vegetable farms, a naturally ventilated polyhouse is the practical first structure: its film roof keeps July rain off the crop while roof vents and roll-up sides help release heat. Where summer production of leafy greens is the aim, a fan-and-pad polyhouse can bring a May afternoon of 43.4°C down to about 31°C inside.
- Distance from factory
- ~1,500 km by road
- Delivery after dispatch
- ~5 days
- Hottest month
- May, ~43°C
- Climate pick
- NVPH + fan & pad

Start with the structure that suits Kanpur’s weather
Kanpur has a demanding summer followed by a wet, humid monsoon. May is the hottest month, with an average afternoon high of 43.4°C and the strongest sunshine at 6.7 kWh/m²/day. July brings the most rain, 258 mm, while August and September are the humid months. A structure here must manage heat in April to June, exclude rain in the monsoon, and allow good ventilation when humidity rises.
A naturally ventilated polyhouse (NVPH) is usually the first choice for protected vegetables. It uses a film roof, roof vents and roll-up curtains, so rain stays off the crop while air movement does not depend on powered fans. It is suitable for crops such as parthenocarpic cucumber and coloured capsicum where the farmer wants protected production without the cooling system of a fan-and-pad house.
Choose a fan-and-pad polyhouse when cooling through peak summer is central to the crop plan. Exhaust fans draw air through wet pads; in May, this can reduce a 43°C afternoon to about 31°C inside. That makes it the stronger option for lettuce and other leafy greens through summer. A square or curved nethouse can also be useful for a nursery, for shade-based cultivation or for crops that need an airy, lower-cost covered space, but an open net roof does not give the monsoon rain protection of a polyhouse.
- Naturally ventilated polyhouse: best fit for a general Kanpur protected-vegetable unit.
- Fan & pad polyhouse: a good fit where summer cooling for leafy greens is required.
- Square nethouse: suitable for raising vegetable seedlings.
- Curved nethouse: suitable where shading, air movement and space for taller crops are priorities.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Kanpur.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 31°C inside, cool enough for leafy greens.

Square nethouse
Good fitFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Low rain here keeps it useful most of the year.

Curved nethouse
Good fitArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Material choices for heat, rain and the August–September humid spell
A complete material kit from Polyhouse Constructions can include the GI structure, polyfilm, nets and fittings. For Kanpur, the roof material is particularly important because of May’s strong sun and the monsoon rainfall. We supply 250-micron white diffused, UV-stabilised polyfilm. Diffused film spreads incoming light and helps reduce leaf scorch risk under strong sunshine.
Use aluminium reflective shade net where additional summer shading is needed. Unlike a net that holds heat, reflective shade net sends heat back out. Roll-up side curtains and side insect net should be planned into the ventilation arrangement. In August and September, when average humidity is 80% and 78% respectively, the side curtains should be opened fully to improve air exchange.
The GI structure uses ISI-marked branded steel from Tata, Jindal and JSW. With roughly 845 mm of annual rain in Kanpur, standard GI gutter sheets with funnels are appropriate for taking roof runoff away from the growing area. The table below matches the main material decisions to Kanpur conditions.
| Part | What we supply | Why in Kanpur |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 6.7 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 43°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 845 mm of rain a year, so standard gutters are enough. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from August to September; open the curtains fully in those months. |
Plan crops around both the protected space and selling months
Crop selection should begin with what the structure can control, then be checked against the mandi season. Parthenocarpic cucumber is a fast 3–4 month protected crop, while drip irrigation helps maintain it through dry spells. Coloured capsicum can be managed under shade net through May’s high temperatures. For a nursery business, a square nethouse supports vegetable seedling production through the year. Fan-and-pad cooling gives a route to summer lettuce and leafy greens.
The district market data also gives useful timing signals. Cucumber has its highest recorded month in January at ₹2,359/q, compared with ₹1,094/q in May. Tomato is highest in August at ₹3,233/q but lowest in March at ₹697/q. Green chilli also peaks in August, at ₹4,403/q. These are historical modal-price observations, not assured future rates; use them to plan possible harvest windows rather than treating them as a guaranteed price.
For farmers considering a wider crop mix, brinjal’s highest month is November, bottle gourd’s is December, and bitter gourd’s is November. Cabbage and cauliflower show highest months in September and August respectively, when monsoon humidity makes ventilation and crop hygiene especially important inside any covered structure.

Coloured capsicum
NVPHGrow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhousePads bring May afternoons down to about 31°C, so greens can grow through summer.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.

Vegetable seedlings
Square nethouseRaise healthy nursery seedlings for local farmers all year.
Mandi timing to check before fixing a crop cycle
Kanpur district market coverage includes Kanpur(Grain) APMC, Pukharayan APMC, Baripaal APMC, Uttaripura APMC, Choubepur APMC and Varipaal APMC. The data also covers markets in Jaunpur, Kanpur Dehat, Kannuj and Rampur. For a farm near Kanpur, nearby places include Unnao, 20 km away; Safipur, 40 km away; Purwa, 50 km away; Pukhrayan, 80 km away; and Kalpi, 90 km away.
Do not plant only for the highest month in the table. Work backwards from the likely harvest period, crop duration, local buyer requirement and whether your structure can maintain crop quality in May heat or monsoon humidity. For example, the January cucumber price season may suit a protected crop cycle differently from a May harvest, while August price highs for tomato and chilli coincide with wet and humid conditions that require active ventilation and careful management.
- Tomato: average modal price ₹1,802/q; highest month August at ₹3,233/q.
- Green chilli: average modal price ₹3,042/q; highest month August at ₹4,403/q.
- Cucumber: average modal price ₹1,912/q; highest month January at ₹2,359/q.
- Okra (bhindi): highest month April at ₹2,644/q.
- Papaya: highest month November at ₹2,975/q.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Tomato | 29 | ₹1,802/q | Aug (₹3,233) | Mar (₹697) |
| Green chilli | 30 | ₹3,042/q | Aug (₹4,403) | Jun (₹2,188) |
| Brinjal | 29 | ₹1,503/q | Nov (₹1,677) | Apr (₹1,318) |
| Bottle gourd | 26 | ₹1,332/q | Dec (₹1,669) | Jun (₹889) |
| Cabbage | 24 | ₹1,351/q | Sep (₹1,897) | Feb (₹760) |
| Cucumber | 19 | ₹1,912/q | Jan (₹2,359) | May (₹1,094) |
| Cauliflower | 27 | ₹1,819/q | Aug (₹3,450) | Feb (₹810) |
| Okra (bhindi) | 21 | ₹1,799/q | Apr (₹2,644) | Jun (₹1,208) |
| Papaya | 14 | ₹2,644/q | Nov (₹2,975) | Jan (₹2,207) |
| Bitter gourd | 15 | ₹2,170/q | Nov (₹2,606) | Jun (₹1,347) |
Why a designed kit is different from pipes bought and cut locally
A polyhouse is not only a collection of pipes, film and net. The material list must suit the selected structure, crop and climate, and the parts must correspond to the drawing. Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, and a venture of Kryzen Biotech Pvt Ltd. Material is manufactured in-house at the factory in Degaon, on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra.
Every kit is cut and drilled to its drawing, with in-house engineering, a 32-point QA checklist, a lab test certificate with dispatch and a technical data sheet for every product. This gives the buyer a way to verify the components being supplied rather than relying on a site-cut estimate. The GI structure carries a 15-year manufacturing warranty, polyfilm a 2.5-year warranty and nets a 3-year warranty.
A local fabricator may be appropriate for a simple repair or a small, familiar job, but ask clear questions before comparing only the initial quote: Is the design checked for the chosen structure? Are the pipes branded? Is every fitting counted? Will technical sheets, a test certificate and written warranty be supplied? The comparison table below sets out these differences.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
Delivery of polyhouse material to Kanpur
Kanpur is about 1,500 km from our Satara factory. We supply material from that factory; Polyhouse Constructions does not have an office in Kanpur. After dispatch, delivery to Kanpur takes 5 days.
Construction and erection are carried out by Kryzen Biotech’s construction team, not by an assumed local branch. This separation is useful for planning: first finalise the structure and material kit, then coordinate the site and erection requirement with the construction team. Keep site readiness, unloading access and the crop plan aligned before booking so the material list is not altered after dispatch.
For a quick weather view while deciding the start date, May is the peak-heat and strongest-sun month. July is the wettest month, and August–September have the highest humidity. The calendar below brings these planning points together.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~43°C highs | ||||||||||||
| Strongest sun | 6.7 kWh/m²/day | ||||||||||||
| Wettest month | ~258 mm | ||||||||||||
| Humid (75%+) | August–September |
Build the Kanpur kit item by item before you book
Use the kit builder at polyhouseconstructions.com to select the structure and see every item, quantity and that week’s rate. A buyer can build a complete kit or buy individual items. This is the point to decide whether the project needs GI structure members, 250-micron white diffused polyfilm, reflective or other shade net, side insect net, gutters, curtains and fittings.
Rates follow weekly GI and plastic rates and are updated every Friday. A 5% bulk discount applies on 10 or more units of an item. Booking requires a 5% advance, with the remaining 95% payable before dispatch. Review the material list against the drawing before booking, especially the ventilation and shading choices needed for May and the humid monsoon months.
When contacting us, state the crop, structure type, intended planting or harvest period, and whether summer cooling is needed. A cucumber plan aiming at a winter harvest is a different design discussion from a leafy-green plan that must run through May. That information helps ensure the kit is matched to the farm’s actual use rather than selected as a standard package.
Check subsidy approval before construction starts
For Uttar Pradesh farmers, subsidy should be checked with the state horticulture department before placing a project order or beginning construction. Under MIDH/NHM, the support is 50% of the cost norm up to 4,000 m² per beneficiary. The stated norm for a tubular naturally ventilated polyhouse is ₹844/m², for a fan-and-pad polyhouse ₹1,400/m², and for a shade net house ₹710/m².
For commercial projects above 2,500 m², NHB guidelines provide a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project. In-Principle Approval from NHB is needed before starting. These norms can change, so confirm the current process, eligibility, documents and applicable cost norm with the state horticulture department before you commit to the structure.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which polyhouse is best for a Kanpur vegetable farm?
A naturally ventilated polyhouse is usually the first choice because it keeps monsoon rain off the crop and uses roof vents and roll-up curtains for air movement. A fan-and-pad polyhouse is better where summer leafy-green production is required, as May cooling can bring about 43°C outside conditions down to about 31°C inside.
What material should be specified for Kanpur’s May heat?
Use 250-micron white diffused, UV-stabilised polyfilm for the roof and consider aluminium reflective shade net for strong summer sunshine. May averages 43.4°C in the afternoon with 6.7 kWh/m²/day of sun, so shading and ventilation should be included in the kit decision.
How long does delivery of material take in Kanpur?
Kanpur is about 1,500 km from the Satara factory. Delivery takes 5 days after dispatch; Polyhouse Constructions does not have an office in Kanpur.
Which crops have useful mandi price seasons near Kanpur?
The available district-market data shows cucumber’s highest month in January at ₹2,359/q, tomato’s in August at ₹3,233/q and green chilli’s in August at ₹4,403/q. These are historical modal-price observations and should be used for planning, not as a price guarantee.
Can I get subsidy for a polyhouse in Kanpur?
MIDH/NHM support is stated as 50% of the cost norm up to 4,000 m² per beneficiary. For an NHB commercial project above 2,500 m², In-Principle Approval is needed before starting; confirm current eligibility and norms with the Uttar Pradesh horticulture department.
Polyhouse material near Kanpur
Neighbouring towns we deliver to from the same route, and how their climate compares with Kanpur.
| Town | From Kanpur | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Unnao | ~20 km | May, 43°C | 845 mm | NVPH + fan & pad |
| Polyhouse material in Safipur | ~40 km | May, 43°C | 845 mm | NVPH + fan & pad |
| Polyhouse material in Purwa | ~50 km | May, 43°C | 845 mm | NVPH + fan & pad |
| Polyhouse material in Pukhrayan | ~80 km | May, 44°C | 738 mm | NVPH + fan & pad |
| Polyhouse material in Kalpi | ~90 km | May, 44°C | 738 mm | NVPH + fan & pad |
| Polyhouse material in Lucknow | ~90 km | May, 43°C | 916 mm | NVPH + fan & pad |
