How it worksBuy individual items

NVPH materials · Ahilyanagar district, Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Shirdi

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Shirdi, Ahilyanagar district, the frame and film are only half the decision; the other half is how the house breathes in April and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Shirdi.

Hottest month
April, ~40°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~2 days
Naturally ventilated polyhouse built with our material, like those we supply to Shirdi
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

How natural ventilation copes with Shirdi's weather

In April the air is dry enough (29% humidity) for an NVPH to vent well, but afternoons of 40°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through April, compare with a fan and pad house below.

MeasureShirdiMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high40°C (April)40.7°Cclose to the state average
Humidity in that month29%35%Dry air vents easily
Rain a year860 mm1,176 mm316 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Shirdi
Cool air enters through the side curtains; warm air leaves through the roof vent.

NVPH material list: 28 × 36 m in Shirdi

To make it concrete, here is the material for a 28 × 36 m NVPH (1,008 m²), a common size for growers around Shirdi. Each item links to its product page with specifications and this week's rate.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

What protected crops fetch at mandis near Shirdi

Prices at the mandis in Ahilyanagar district follow a clear yearly pattern. Cabbage is the extreme case, from ₹528 per quintal in April up to ₹1,405 in July (166% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Tomato18₹1,259/qDec · ₹1,849Apr · ₹817126%
Cucumber15₹1,391/qJan · ₹1,801Apr · ₹95189%
Cauliflower16₹1,408/qJun · ₹2,167Mar · ₹926134%
Cabbage15₹897/qJul · ₹1,405Apr · ₹528166%
Okra (bhindi)15₹3,017/qDec · ₹3,958Sep · ₹2,16183%
Brinjal15₹2,281/qNov · ₹3,589Apr · ₹1,426152%
Green chilli15₹3,888/qFeb · ₹5,164Sep · ₹2,74788%
Capsicum13₹2,793/qNov · ₹3,830Aug · ₹2,22572%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Ahilyanagar district. ₹ per quintal (100 kg).

A planting calendar built on local prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoNov, Dec~75SeptemberApr
CucumberJan, Jun, Dec~40NovemberApr
CauliflowerJun, Nov~75MarchMar
CabbageJul~75AprilApr
Okra (bhindi)Dec~45OctoberSep
BrinjalNov~60SeptemberApr
Green chilliJan, Feb, Mar~75NovemberSep
CapsicumJun, Nov~90AugustAug
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Shirdi

April is the hottest month, with afternoons around 39.6°C; January nights drop to about 12.1°C. July is the wettest (221 mm of 860 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.5°C12.1°C39%1 mm4.91.8
Feb32.9°C14.9°C30%3 mm5.82
Mar36.3°C18.3°C28%8 mm6.52.2
Apr39.6°C21.7°C29%5 mm7.12.7
May39.5°C22.9°C43%12 mm7.24.1
Jun32.7°C22.7°C70%151 mm5.44.4
Jul28.8°C21.7°C82%221 mm4.14.8
Aug27.9°C21°C85%196 mm4.14.1
Sep28.4°C20.5°C84%178 mm4.82.5
Oct29.1°C18.2°C73%61 mm5.11.6
Nov29°C15°C62%21 mm4.81.6
Dec28.8°C12.6°C49%3 mm4.61.6
NASA POWER long-term monthly averages for Shirdi (19.77, 74.48).

What NVPH material costs this week

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Shirdi and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Shirdi

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Changes we would make for Shirdi

The standard kit suits most of India. For Shirdi's weather we would adjust a few items — here is the standard choice, what we would pick instead, and why.

PartStandard kitFor ShirdiWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.3 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 40°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~221 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

A season-by-season NVPH plan for Shirdi

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~40°C highs
Strongest sun7.3 kWh/m²/day
Wettest month~221 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Shirdi.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 221 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    April

    Peak heat, about 40°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Shirdi

Coloured capsicum for Shirdi

Coloured capsicum

NVPH

Grow under shade net through April, when highs reach 40°C.

Cucumber (parthenocarpic) for Shirdi

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Shirdi

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Shirdi?

Shirdi is one of the towns where a fan and pad house can earn its running cost: dry April air lets wet pads take 40°C down to about 28°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~28°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in ShirdiCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Shirdi

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Shirdi is roughly 270 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Shirdi in about 2 days, carrying the invoice, the test reports and 100% invoice insurance.

Across Ahilyanagar district

Among the 130 towns we supply in Maharashtra, Shirdi ranks 81st for summer heat and 88th for yearly rain. Other Ahilyanagar district towns on our list:

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Shirdi's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in April. For leafy greens through April (40°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Shirdi?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Do I need an entry cabin in Shirdi?

We recommend it: 3 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Shirdi take?

About 270 km by road from our Satara factory, so usually in about 2 days after dispatch.

NVPH materials near Shirdi

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom ShirdiHottest monthHumid monthsSuits
NVPH materials in Shrirampur~30 kmApr, 39°C3NVPH + fan & pad
NVPH materials in Vaijapur~40 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Yevla~40 kmApr, 40°C3NVPH + fan & pad
NVPH materials in Sangamner~50 kmApr, 39°C3NVPH + fan & pad
NVPH materials in Rahuri~60 kmApr, 39°C3NVPH + fan & pad
NVPH materials in Manmad~70 kmApr, 39°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Shirdi
  2. Kryzen: Polyhouse farming in Shirdi
  3. NASA POWER monthly climate averages for Shirdi
  4. NHB cost norms for protected cultivation
Build your kit