How it worksBuy individual items

NVPH materials · Ahilyanagar district, Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Sangamner

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

We sell the complete NVPH material kit to growers in Sangamner straight from our Satara factory: the GI frame cut and drilled to drawing, 250-micron diffused film, side insect net, curtains with gear units, gutters and every fitting. Below is the live list and price, and what Sangamner's weather changes in it.

Hottest month
April, ~39°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
Next day
Naturally ventilated polyhouse built with our material, like those we supply to Sangamner
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Sangamner?

In April the air is dry enough (30% humidity) for an NVPH to vent well, but afternoons of 39°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through April, compare with a fan and pad house below.

MeasureSangamnerMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high39°C (April)40.7°C1.7°C cooler than the state average
Humidity in that month30%35%Dry air vents easily
Rain a year848 mm1,176 mm328 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Sangamner
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Sangamner

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Sangamner; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor SangamnerWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.3 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 39°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~211 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Local market prices for polyhouse crops near Sangamner

Across 12 mandis in Ahilyanagar district, 8 polyhouse and nethouse crops trade regularly. Tomato has the most arrivals; Cabbage has the widest price swing (166%), peaking in July.

CropMarketsAverageHighest monthLowest monthSwing
Tomato18₹1,259/qDec · ₹1,849Apr · ₹817126%
Cucumber15₹1,391/qJan · ₹1,801Apr · ₹95189%
Cauliflower16₹1,408/qJun · ₹2,167Mar · ₹926134%
Cabbage15₹897/qJul · ₹1,405Apr · ₹528166%
Okra (bhindi)15₹3,017/qDec · ₹3,958Sep · ₹2,16183%
Brinjal15₹2,281/qNov · ₹3,589Apr · ₹1,426152%
Green chilli15₹3,888/qFeb · ₹5,164Sep · ₹2,74788%
Capsicum13₹2,793/qNov · ₹3,830Aug · ₹2,22572%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Ahilyanagar district. ₹ per quintal (100 kg).

A planting calendar built on local prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoNov, Dec~75SeptemberApr
CucumberJan, Jun, Dec~40NovemberApr
CauliflowerJun, Nov~75MarchMar
CabbageJul~75AprilApr
Okra (bhindi)Dec~45OctoberSep
BrinjalNov~60SeptemberApr
Green chilliJan, Feb, Mar~75NovemberSep
CapsicumJun, Nov~90AugustAug
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Sangamner month by month

April is the hottest month, with afternoons around 39.3°C; January nights drop to about 11.9°C. July is the wettest (211 mm of 848 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.4°C11.9°C41%1 mm4.91.7
Feb32.8°C14.6°C32%2 mm5.81.9
Mar36.1°C18.1°C29%8 mm6.52.1
Apr39.3°C21.4°C30%5 mm7.12.6
May39°C22.5°C45%14 mm7.24
Jun32°C22.4°C71%152 mm5.44.5
Jul28.5°C21.4°C82%211 mm4.15
Aug27.6°C20.7°C85%190 mm4.14.3
Sep28.2°C20.3°C84%172 mm4.82.6
Oct28.8°C18°C74%69 mm5.11.7
Nov28.5°C14.8°C64%21 mm4.81.7
Dec28.4°C12.4°C51%3 mm4.61.6
NASA POWER long-term monthly averages for Sangamner (19.57, 74.21).

NVPH material list: 20 × 24 m in Sangamner

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Sangamner

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Sangamner and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Sangamner

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Sangamner's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~39°C highs
Strongest sun7.3 kWh/m²/day
Wettest month~211 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Sangamner.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 211 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    April

    Peak heat, about 39°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Sangamner

Coloured capsicum for Sangamner

Coloured capsicum

NVPH

Grow under shade net through April, when highs reach 39°C.

Cucumber (parthenocarpic) for Sangamner

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Sangamner

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Sangamner?

Sangamner is one of the towns where a fan and pad house can earn its running cost: dry April air lets wet pads take 39°C down to about 28°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~28°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in SangamnerCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Sangamner

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Sangamner is about 230 km by road, so a dispatched load normally arrives the next day. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Sangamner and the rest of Ahilyanagar district

Sangamner is mid-table for heat in Maharashtra (93rd of 130), and in the middle for rain (92nd). We also supply 6 other towns in Ahilyanagar district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Sangamner's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in April. For leafy greens through April (39°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Sangamner?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Sangamner take?

About 230 km by road from our Satara factory, so usually the next day after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Sangamner

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom SangamnerHottest monthHumid monthsSuits
NVPH materials in Shirdi~50 kmApr, 40°C3NVPH + fan & pad
NVPH materials in Sinnar~50 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Rahuri~60 kmApr, 39°C3NVPH + fan & pad
NVPH materials in Shrirampur~60 kmApr, 39°C3NVPH + fan & pad
NVPH materials in Nashik~80 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Yevla~80 kmApr, 40°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Sangamner
  2. Kryzen: Polyhouse farming in Sangamner
  3. NASA POWER monthly climate averages for Sangamner
  4. NHB cost norms for protected cultivation
Build your kit