How it worksBuy individual items

NVPH materials · Vadodara district, Gujarat

Naturally Ventilated Polyhouse Materials Seller in Padra

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Padra, Vadodara district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Padra.

Hottest month
May, ~42°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Padra
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Padra?

In May the air is dry enough (44% humidity) for an NVPH to vent well, but afternoons of 42°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasurePadraGujarat average (74 towns)What it means for the NVPH
Hottest-month high42°C (May)40.5°C1.5°C hotter than the state average
Humidity in that month44%45%Dry air vents easily
Rain a year1,131 mm894 mm237 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Padra
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Padra

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Padra; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor PadraWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.5 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 42°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~377 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Padra

Prices at the mandis in Vadodara district follow a clear yearly pattern. Tomato is the extreme case, from ₹659 per quintal in March up to ₹2,953 in August (348% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Cabbage4₹1,124/qNov · ₹1,717Mar · ₹394336%
Green chilli4₹3,171/qJul · ₹4,626Sep · ₹1,947138%
Tomato4₹1,876/qAug · ₹2,953Mar · ₹659348%
Cauliflower4₹1,998/qNov · ₹2,624Mar · ₹1,140130%
Bottle gourd4₹1,437/qNov · ₹1,829May · ₹1,01480%
Brinjal4₹1,685/qNov · ₹2,572Mar · ₹809218%
Spinach4₹1,578/qJul · ₹2,434Jan · ₹659269%
Cucumber4₹2,216/qJun · ₹2,736Mar · ₹1,54577%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Vadodara district. ₹ per quintal (100 kg).

When to plant in Padra for the best prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cabbage peaks in November; at about 75 days to first harvest, transplant in August.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
CabbageJul, Nov, Dec~75AugustMar
Green chilliJan, Jul~75AprilSep
TomatoJul, Aug, Dec~75MayMar
CauliflowerJun, Jul, Aug, Nov~75AugustMar
Bottle gourdJun, Jul, Sep, Oct, Nov~55SeptemberMay
BrinjalAug, Sep, Nov~60SeptemberMar
SpinachJul, Aug, Sep, Oct~30JuneJan
CucumberJun, Jul, Nov~40AprilMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Padra

May is the hottest month, with afternoons around 41.8°C; January nights drop to about 12.6°C. July is the wettest (377 mm of 1,131 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan30.3°C12.6°C34%1 mm4.72
Feb33.6°C15.4°C30%2 mm5.62
Mar37.7°C19.6°C29%3 mm6.62.1
Apr41.3°C23.7°C34%2 mm7.32.5
May41.8°C26.6°C44%4 mm7.53.9
Jun36.2°C27.1°C65%201 mm5.94.3
Jul31.2°C25.4°C83%377 mm4.24
Aug30°C24.4°C87%328 mm3.93.3
Sep30.8°C23.9°C84%185 mm4.82.1
Oct32.8°C20.9°C67%21 mm5.51.4
Nov32.5°C17°C52%5 mm4.71.6
Dec30.7°C13.9°C40%2 mm4.31.8
NASA POWER long-term monthly averages for Padra (22.24, 73.08).

NVPH material list: 20 × 24 m in Padra

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Padra

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Padra and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Padra

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Padra's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~42°C highs
Strongest sun7.5 kWh/m²/day
Wettest month~377 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Padra.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 377 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 42°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Padra

Coloured capsicum for Padra

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 42°C.

Cucumber (parthenocarpic) for Padra

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Padra

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Padra?

Padra is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 42°C down to about 33°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~33°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in PadraCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Padra

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Padra is about 630 km by road, so a dispatched load normally arrives in about 3 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Padra and the rest of Vadodara district

Padra is mid-table for heat in Gujarat (30th of 74), and among the wettest (12th for rain). We also supply 1 other town in Vadodara district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Padra's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (42°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Padra?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

How long does delivery to Padra take?

About 630 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Padra?

We recommend it: 3 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

NVPH materials near Padra

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom PadraHottest monthHumid monthsSuits
NVPH materials in Vadodara~20 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Anand~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Petlad~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Khambhat~60 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Nadiad~70 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Umreth~70 kmMay, 43°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Padra
  2. Kryzen: Polyhouse farming in Padra
  3. NASA POWER monthly climate averages for Padra
  4. NHB cost norms for protected cultivation
Build your kit