How it worksBuy individual items

NVPH materials · Anakapalli district, Andhra Pradesh

Naturally Ventilated Polyhouse Materials Seller in Anakapalle

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Anakapalle, Anakapalli district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in September. Here is the NVPH kit we supply, priced this week, with the choices we would make for Anakapalle.

Hottest month
May, ~34°C
Humid (75%+)
6 months
NVPH material, 1 acre
₹734/m²
Delivery
~5 days
Naturally ventilated polyhouse built with our material, like those we supply to Anakapalle
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Anakapalle?

With highs of about 34°C in May, natural ventilation keeps the house within range for most crops without any running cost. The roof vent and side curtains do the work; you only manage them by the season.

MeasureAnakapalleAndhra Pradesh average (84 towns)What it means for the NVPH
Hottest-month high34°C (May)38.4°C4.4°C cooler than the state average
Humidity in that month73%54%Keep curtains open; disease risk is higher
Rain a year1,253 mm998 mm255 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Anakapalle
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Anakapalle

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Anakapalle; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor AnakapalleWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 6.4 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan6 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepSeptember brings ~224 mm; clean before August
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Anakapalle's weather, month by month

May is the hottest month, with afternoons around 33.7°C; January nights drop to about 20.5°C. September is the wettest (224 mm of 1,253 mm a year), and humidity stays at 75% or more for 6 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Mar, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan26.7°C20.5°C71%5 mm4.62.7
Feb29°C22.1°C69%11 mm5.52.6
Mar31.6°C24.5°C69%15 mm63.1
Apr33.3°C26.5°C70%31 mm6.44
May33.7°C28.1°C73%72 mm64.1
Jun31.8°C27.7°C78%170 mm4.74.3
Jul30.2°C26.8°C83%201 mm4.44.5
Aug29.7°C26.5°C85%211 mm4.64.2
Sep29.6°C26.6°C84%224 mm4.63.2
Oct29.2°C25.8°C80%211 mm4.63
Nov27.6°C23.2°C77%80 mm4.43.5
Dec26.2°C21°C74%22 mm4.23.3
NASA POWER long-term monthly averages for Anakapalle (17.69, 83.00).

NVPH material list: 52 × 76 m in Anakapalle

A 52 m wide, 76 m long naturally ventilated polyhouse (3,952 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureBig Bottom (60X2.0X8000)102 nos2,546 kg
GI structureSmall Column (76X2.0X4500)133 nos2,250 kg
GI structureGutter Purlin (42X2.0X4000)170 nos1,414 kg
GI structureGI Gutter Sheet375 mtr—
GI structureBig Arc (42X2.0X5200)114 nos1,233 kg
GI structureSide Hockey (60X2.0X5500)64 nos1,098 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)722 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)501 mtr—
Film & netsSide Insect Net (5.2 m)258 mtr—
Film & netsWhite Shade Net 50%864 mtr—
Film & netsSide Skirting Apron (1.5 m)258 mtr—
Fittings & accessoriesAluminium Profile2,592 mtr—
Fittings & accessoriesF Bracket228 nos—
Fittings & accessoriesGI Spring4,425 mtr—
Fittings & accessoriesSelf Drilling Screw5,832 nos—
Fittings & accessoriesNylon Rope 12 mm (200 m Bundle)11 nos—
Fittings & accessoriesT Joint (Tee)102 nos—
The largest items of a 52 × 76 m kit (68 items in all, about 16.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Anakapalle

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Anakapalle and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Anakapalle

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Anakapalle's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~34°C highs
Strongest sun6.4 kWh/m²/day
Wettest month~224 mm
Humid (75%+)June–November
Nethouse seasonNovember–May
NASA POWER monthly averages for Anakapalle.
  1. 1

    Before September

    Clear gutters and funnels, check the film for tears and tighten the GI springs. September brings about 224 mm, the heaviest rain of the year.

  2. 2

    June to November

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 34°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  4. 4

    November to May

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Anakapalle

Coloured capsicum for Anakapalle

Coloured capsicum

NVPH

The most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic) for Anakapalle

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; keep the curtains open in humid months to limit disease.

Tomato for Anakapalle

Tomato

NVPH

Indeterminate varieties trained up strings give a long harvest under cover.

Gerbera and rose for Anakapalle

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Anakapalle?

In Anakapalle the NVPH is the clear choice for most growers: at 73% humidity in May, pads would cool only a few degrees while adding power and water bills.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in AnakapalleCapsicum, cucumber, tomato, flowersRarely worth it at this humidity

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Anakapalle

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Anakapalle is roughly 1,250 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Anakapalle in about 5 days, carrying the invoice, the test reports and 100% invoice insurance.

Anakapalle within Andhra Pradesh

Anakapalle is one of the cooler towns in Andhra Pradesh (79th hottest of 84), and among the wettest (11th for rain). These are the larger towns we supply elsewhere in Andhra Pradesh.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Anakapalle's summer?

Yes for most crops. 34°C at 73% humidity is best handled by open curtains and shade net; pad cooling would add little at that humidity.

What does NVPH material cost in Anakapalle?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Do I need an entry cabin in Anakapalle?

We recommend it: 6 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Anakapalle take?

About 1,250 km by road from our Satara factory, so usually in about 5 days after dispatch.

NVPH materials near Anakapalle

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom AnakapalleHottest monthHumid monthsSuits
NVPH materials in Visakhapatnam~30 kmMay, 34°C6NVPH
NVPH materials in Narsipatnam~50 kmApr, 37°C7NVPH
NVPH materials in Bheemunipatnam~70 kmMay, 33°C6NVPH
NVPH materials in Tuni~80 kmApr, 38°C7NVPH
NVPH materials in Vizianagaram~80 kmApr, 38°C6NVPH
NVPH materials in Salur~120 kmApr, 40°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Anakapalle
  2. Kryzen: Polyhouse farming in Anakapalle
  3. NASA POWER monthly climate averages for Anakapalle
  4. NHB cost norms for protected cultivation
Build your kit