How it worksBuy individual items

NVPH materials · Anantapuramu district, Andhra Pradesh

Naturally Ventilated Polyhouse Materials Seller in Anantapur

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Anantapur's numbers — April afternoons of about 39°C, 619 mm of rain a year and humid air from September to November — and the NVPH material we would send for them.

Hottest month
April, ~39°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Anantapur
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Anantapur?

In April the air is dry enough (39% humidity) for an NVPH to vent well, but afternoons of 39°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through April, compare with a fan and pad house below.

MeasureAnantapurAndhra Pradesh average (84 towns)What it means for the NVPH
Hottest-month high39°C (April)38.4°Cclose to the state average
Humidity in that month39%54%Dry air vents easily
Rain a year619 mm998 mm379 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Anantapur
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Anantapur

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Anantapur; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor AnantapurWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 6.9 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 39°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepAbout 619 mm a year
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Anantapur

We averaged two years of daily Agmarknet prices from 11 markets in nearby districts (Anantapur, Tumakuru, Tumkur, YSR Kadapa) for crops that are grown under cover. Tomato swings the most: about ₹2,541 per quintal in June against ₹750 in March, a 239% difference. Cucumber is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Tomato7₹1,394/qJun · ₹2,541Mar · ₹750239%
Cucumber2₹1,607/qNov · ₹1,644Jan · ₹1,50010%
Green chilli2₹2,447/qFeb · ₹2,775Oct · ₹1,92544%
Cabbage2₹1,043/qFeb · ₹1,238Oct · ₹90736%
Brinjal2₹2,404/qOct · ₹2,742Apr · ₹1,96440%
Beans2₹2,710/qApr · ₹3,057Jan · ₹2,46024%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Anantapur, Tumakuru, Tumkur, YSR Kadapa). ₹ per quintal (100 kg).

Timing your crop for the Anantapur market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in June; at about 75 days to first harvest, transplant in March.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoJun~75MarchMar
CucumberJan, Feb, Mar, Apr, May, Sep, Oct, Nov, Dec~40SeptemberJan
Green chilliJan, Feb, Mar, Apr, May~75NovemberOct
CabbageFeb, May~75NovemberOct
BrinjalJan, Oct, Nov~60AugustApr
BeansMar, Apr, May~50FebruaryJan
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Anantapur's weather, month by month

April is the hottest month, with afternoons around 39°C; January nights drop to about 15.6°C. September is the wettest (132 mm of 619 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Jul, Aug, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan31°C15.6°C57%3 mm5.42.6
Feb34.5°C17.8°C43%3 mm6.22.7
Mar37.7°C21.7°C35%13 mm6.72.7
Apr39°C24.8°C39%29 mm6.92.5
May37.3°C24.9°C52%75 mm6.63.5
Jun32.5°C22.7°C67%65 mm5.84.9
Jul31.6°C22°C69%73 mm55.5
Aug31.4°C21.6°C71%82 mm5.14.7
Sep30.8°C21.3°C75%132 mm5.33
Oct30.1°C20.3°C76%102 mm5.22.1
Nov29°C17.9°C75%35 mm4.92.3
Dec29°C15.7°C69%7 mm4.82.5
NASA POWER long-term monthly averages for Anantapur (14.68, 77.61).

NVPH material list: 52 × 76 m in Anantapur

A 52 m wide, 76 m long naturally ventilated polyhouse (3,952 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureBig Bottom (60X2.0X8000)102 nos2,546 kg
GI structureSmall Column (76X2.0X4500)133 nos2,250 kg
GI structureGutter Purlin (42X2.0X4000)170 nos1,414 kg
GI structureGI Gutter Sheet375 mtr—
GI structureBig Arc (42X2.0X5200)114 nos1,233 kg
GI structureSide Hockey (60X2.0X5500)64 nos1,098 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)722 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)501 mtr—
Film & netsSide Insect Net (5.2 m)258 mtr—
Film & netsWhite Shade Net 50%864 mtr—
Film & netsSide Skirting Apron (1.5 m)258 mtr—
Fittings & accessoriesAluminium Profile2,592 mtr—
Fittings & accessoriesF Bracket228 nos—
Fittings & accessoriesGI Spring4,425 mtr—
Fittings & accessoriesSelf Drilling Screw5,832 nos—
Fittings & accessoriesNylon Rope 12 mm (200 m Bundle)11 nos—
Fittings & accessoriesT Joint (Tee)102 nos—
The largest items of a 52 × 76 m kit (68 items in all, about 16.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Anantapur

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Anantapur and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Anantapur

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Anantapur's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~39°C highs
Strongest sun6.9 kWh/m²/day
Humid (75%+)September–November
Nethouse seasonNovember–January
NASA POWER monthly averages for Anantapur.
  1. 1

    September to November

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  2. 2

    April

    Peak heat, about 39°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  3. 3

    November to January

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Anantapur

Coloured capsicum for Anantapur

Coloured capsicum

NVPH

Grow under shade net through April, when highs reach 39°C.

Cucumber (parthenocarpic) for Anantapur

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Anantapur

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Anantapur?

Anantapur is one of the towns where a fan and pad house can earn its running cost: dry April air lets wet pads take 39°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in AnantapurCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Anantapur

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Anantapur is roughly 700 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Anantapur in about 3 days, carrying the invoice, the test reports and 100% invoice insurance.

Anantapur and the rest of Anantapuramu district

Anantapur is mid-table for heat in Andhra Pradesh (33rd of 84), and among the driest (79th for rain). We also supply 8 other towns in Anantapuramu district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Anantapur's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in April. For leafy greens through April (39°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Anantapur?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Anantapur take?

About 700 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Anantapur

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom AnantapurHottest monthHumid monthsSuits
NVPH materials in Dharmavaram~40 kmApr, 39°C3NVPH + fan & pad
NVPH materials in Gooty~60 kmApr, 40°C2NVPH + fan & pad
NVPH materials in Uravakonda~60 kmApr, 40°C2NVPH + fan & pad
NVPH materials in Tadipatri~70 kmApr, 41°C3NVPH + fan & pad
NVPH materials in Guntakal~80 kmApr, 40°C2NVPH + fan & pad
NVPH materials in Pavagada~100 kmApr, 38°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Anantapur
  2. Kryzen: Polyhouse farming in Anantapur
  3. NASA POWER monthly climate averages for Anantapur
  4. NHB cost norms for protected cultivation
Build your kit