ఇది ఎలా పనిచేస్తుందివిడి సామగ్రి కొనండి

Lilium Polyhouse Profit per Acre India: Revenue and Cost Guide

Polyhouse Constructions Agronomy Desk · 12 నవం, 2026

Lilium is a premium but high-risk polyhouse flower crop in India. For a one-acre site, a realistic lilium crop may need roughly ₹55 lakh to ₹1 crore or more in seasonal working capital, mainly for bulbs. Gross flower revenue can range from about ₹40 lakh in a weak market to more than ₹1 crore in a well-timed premium crop. The difference comes from bulb size and price, marketable stems, stem grade, and the price received during the flowering window.

Do not treat lilium as a crop with a fixed per-acre profit. First calculate returns per marketable stem, then test the plan at a low, normal and strong selling price. This is especially important for a first crop, where buyer relationships and post-harvest handling are still developing.

Start with the right acre calculation

One acre is 4,047 m², but all of it is not planted. Paths, drainage, work space and the pack area reduce the productive beds. In a practical layout, 75% to 85% of the structure may be planted. That leaves around 3,000 to 3,400 m² of crop area per acre of covered site.

Lilium planting density commonly falls in the range of 35 to 55 bulbs per m². It depends on bulb size, cultivar group, season, bed width and the target stem grade. A close density can increase the number of stems, but it may reduce stem thickness, bud count and uniformity.

Use this basic calculation:

Marketable stems = planted crop area × bulbs per m² × marketable percentage

A sensible planning range for marketable output is 82% to 92% of planted bulbs. The balance accounts for blind shoots, short stems, disease losses, damage and stems that fail to meet the required grade. Do not assume every bulb makes a saleable stem.

Planning item for a one-acre covered site

Cautious range

Better-managed range

Net crop area

3,000–3,250 m²

3,250–3,400 m²

Planting density

35–45 bulbs/m²

45–55 bulbs/m²

Bulbs planted

105,000–146,000

146,000–187,000

Marketable percentage

82%–87%

88%–92%

Marketable stems

86,000–127,000

128,000–172,000

These are planning ranges, not a yield promise. Asian, LA hybrid and Oriental lilium types behave differently. Larger bulbs usually support stronger stems and more buds, but they also increase the biggest cost in the crop budget.

The bulb bill is the main cost driver

Imported lilium bulbs are usually the single largest expense. Bulb rates can vary sharply by variety, bulb circumference, source country, exchange rate, freight, availability and procurement time. A larger bulb may cost considerably more, so compare it by expected saleable stem quality, not only by rate per bulb.

For planning, make a bulb-cost sheet using the supplier's written quotation. As a broad risk range, bulb expenditure for one acre can run from roughly ₹35 lakh to more than ₹90 lakh. Premium Oriental varieties, larger grades and high planting density can push it higher.

For example, if you plant 145,000 bulbs at ₹48 each, the bulb bill alone is:

145,000 × ₹48 = ₹69.6 lakh

The bulbs must be correctly stored and planted soon after receipt as advised by the supplier. Poor cold-chain handling before planting can reduce uniform emergence and stem quality. Keep lot number, cultivar, bulb grade, arrival condition and planting date in your records. These details are useful when reviewing crop performance.

Other seasonal costs to budget

Besides bulbs, allow for soil or media preparation, raised beds, drip and fertigation operation, fertilisers and water-soluble nutrients, labour, staking or support netting, electricity, harvest labour, sleeves, cartons or crates, local transport, grading losses and commission or marketing costs.

Depending on region and production system, these non-bulb operating costs can be around ₹10 lakh to ₹25 lakh per acre per crop. The range is wide because cooling, labour, packing standard and freight differ greatly. Add interest on working capital if bulbs are bought on credit or by short-term borrowing.

This seasonal crop budget does not include the full construction cost of the polyhouse, land rent, packhouse, cold room, pre-cooler, vehicle, loan interest on fixed assets, or annual depreciation. These must be added before calling the result a true farm profit.

For structure cost planning, see this guide on NVPH cost and profit per acre. You can also build a material kit with live rates rather than using an old estimate; GI and plastic rates change over time.

Revenue depends on grade, not only stem count

Lilium is sold as a cut flower, often by stem or in bunches. Buyers pay more for straight, long, sturdy stems with the required number of well-developed buds, clean foliage and good vase-life. A stem that is harvestable but too short, bent or poorly budded may sell at a substantial discount.

Typical factors that affect price include:

  • Cultivar group: Asiatic, LA hybrid and Oriental lilium serve different buyer preferences and price brackets.
  • Stem length and thickness: Event decorators and premium florists generally need a uniform grade.
  • Bud count and opening stage: The market may specify one showing colour bud, but not an open flower.
  • Colour and variety demand: White, pink, yellow and novelty types do not move equally in every city.
  • Harvest season: Wedding and festival demand can lift prices, while simultaneous arrivals depress them.
  • Destination market: Local mandi, wholesale flower market, event florist and organised retail have different grades, payment terms and rejection risk.

A useful revenue formula is:

Gross revenue = marketable stems × average realised price per stem

The important word is realised. It is the money received after normal grade discounts and agreed sales deductions, not the highest quoted market price.

Three lilium revenue scenarios per acre

The scenarios below assume a one-acre covered site with approximately 3,200 m² of net crop area. They show why a lilium business cannot be planned from a single market-day rate.

Scenario

Bulbs planted

Marketable stems

Average realised rate/stem

Gross flower revenue

Indicative seasonal cost*

Margin before fixed-asset cost

Weak price / quality outcome

135,000

112,000

₹35

₹39.2 lakh

₹80–90 lakh

Large loss possible

Planned, moderate outcome

145,000

127,000

₹60

₹76.2 lakh

₹80–90 lakh

Break-even to low margin

Strong grade and market window

155,000

142,000

₹85

₹120.7 lakh

₹85 lakh–₹1 crore

₹20 lakh+ possible

*Indicative seasonal cost includes bulbs and crop operating costs, but excludes polyhouse capital cost, land cost, fixed-asset depreciation and finance cost. It varies materially with bulb grade, crop type, location and selling method.

The table is deliberately conservative about profit. If the bulb cost is high, a reasonable stem price may only recover crop expenses. Conversely, a good flower grade sold in a favourable market window can create a worthwhile margin. The crop should therefore be booked only after checking both bulb quotations and buyer demand.

Choose the flowering window before you order bulbs

Lilium generally needs a cool crop environment for quality stems. It is better suited to naturally cool locations and winter production windows than to very hot plains without adequate climate control. High temperatures can lead to short stems, bud drop, leaf scorch, weak stems and poor uniformity.

A naturally ventilated polyhouse can protect the crop from rain, wind and some pest pressure, while side ventilation helps remove humidity. In warmer regions, active cooling and air circulation may be needed during critical periods, but fan-and-pad cooling still has limits when outside temperature and humidity are high. Read the comparison of NVPH versus fan and pad polyhouse before selecting a system.

Plan backwards from the expected sale window:

  1. Identify local wedding, event and festive demand periods.
  2. Ask two or three buyers what colours, grades, bunch size and delivery condition they accept.
  3. Confirm the likely harvest date for the chosen bulb lot with the bulb supplier and your horticulture adviser.
  4. Reserve cold storage, packing material and transport before flowering begins.
  5. Avoid planting the entire acre in one variety and one harvest week. Staggering lots can reduce the risk of one weak market window.

The crop duration often falls around 90 to 130 days from planting to harvest, but it varies by cultivar, bulb treatment, temperature and season. Use supplier-specific crop information, not a generic calendar alone.

Protect stem quality from planting to dispatch

Lilium needs well-drained, disease-free beds or a clean growing medium, dependable irrigation water and uniform fertigation. Test soil and water before planting. High salinity, poor drainage and prolonged wet beds can affect roots and increase disease risk.

Maintain suitable plant support so stems remain straight. Keep the crop canopy ventilated, remove diseased plant material promptly and avoid repeated leaf wetting. Scout regularly for pests and diseases. For any plant-protection decision, follow the product label, residue requirements and advice from your KVK or qualified agronomist; do not rely on unverified spray schedules.

Harvest is also a profit decision. Cut at the stage required by the buyer, handle stems gently, remove field heat quickly and grade by agreed stem length and bud standard. Hydration, clean water, shaded handling and quick dispatch protect vase-life. If flowers travel long distances, a cold chain and dependable logistics may matter as much as the crop itself.

For a comparable flower-enterprise budgeting approach, see the gerbera polyhouse cost guide. The crop economics are different, but buyer planning, grading and post-harvest discipline are equally important.

Test your project before committing a full acre

A full acre of lilium ties up a large amount of money for a relatively short crop. Before booking bulbs, complete this checklist:

Protected-cultivation support may be available through MIDH/NHM, generally at 50% of the cost norm up to 4,000 m² per beneficiary. NHB commercial-project support has separate eligibility and approval conditions. Norms and state implementation change, so confirm current provisions with your state horticulture department before beginning work. Our overview of NVPH subsidy explains the planning points to check.

Next steps

Build your acre-wise sheet from the bulb quotation first. Then enter a conservative marketable-stem percentage and the lowest price you believe you may receive, not the peak price seen in a flower market. If this low-case result cannot carry your bulb bill, operating expense and finance cost, reduce the planting size or improve the marketing plan before planting.

Choose a structure based on your local climate and crop season, then finalise ventilation, insect exclusion, shade and drainage requirements. Polyhouse Constructions supplies protected-cultivation material kits and individual components; use the online kit builder to check the current item quantities and weekly rates. Construction and erection are handled by Kryzen Biotech's construction team.

Frequently asked questions

How many lilium stems can one acre of polyhouse produce in India?

A one-acre covered site may produce roughly 86,000 to 172,000 marketable stems, depending on usable crop area, bulb density and crop quality. The full acre is not planted, so calculate output from actual bed area rather than 4,047 m².

What is the biggest expense in lilium cultivation?

Bulbs are usually the biggest seasonal expense by a wide margin. Their cost changes with bulb grade, cultivar, source, freight and availability, so obtain a current written quotation before preparing the project budget.

Is lilium profitable in a naturally ventilated polyhouse?

It can be profitable in cool locations or suitable winter windows when flower grade and marketing are strong. In hot conditions, an NVPH may not maintain the temperature needed for premium stems, so assess local climate carefully.

Which lilium type gives the best price in India?

There is no single best type for every market. Oriental, LA hybrid and Asiatic lilies have different production needs and buyer demand; choose after speaking with wholesalers, florists and event suppliers in your target city.

How can a lilium grower reduce market-price risk?

Speak with more than one buyer before planting and confirm their grade, colour and delivery requirements. Staggering varieties or planting lots can spread harvests across more than one selling period, though it does not guarantee prices.

మీ కిట్ తయారు చేయండి