Broccoli Spacing in Polyhouse: Transplant Checklist for Head Size
Polyhouse Constructions Agronomy Desk · 12 నవం, 2026
Broccoli spacing in a polyhouse is normally 45–50 cm between plants. Use 45 × 45 cm for compact cultivars and smaller to medium heads in cool, dry conditions. Use 50 × 50 cm, or up to 45 × 60 cm, for vigorous cultivars, warm spells, humid periods and large-head markets.
Do not select spacing only to maximise plant count. A broccoli plant needs enough root area, light and moving air to make a tight, marketable central head. Overcrowding can give thinner stems, uneven heads, humidity within the crop and greater disease risk. Very wide spacing can produce oversized heads that may not suit your buyer.
Use this checklist before transplanting. It will help you match your bed marking to the cultivar, season and intended head grade.
Quick broccoli transplant spacing checklist
Tick each point before seedlings go into the beds:
Broccoli is a cool-season crop. A naturally ventilated structure can protect it from heavy rain, insect entry and sudden weather, but it can also retain heat. Learn the basics of ventilation and layout in what is an NVPH before planning a broccoli crop under plastic.
Choose spacing by cultivar vigour and market head size
The right broccoli spacing in polyhouse begins with a clear production aim. Plant architecture varies substantially among hybrids. Some make an upright, compact canopy. Others have broad leaves and strong stems, especially under fertile soil and favourable temperatures.
Head size is also a market decision. Hotels, modern retail and premium vegetable buyers may prefer uniform medium to large heads. Local wholesale buyers may accept a wider range, but oversized, loose or uneven heads can still reduce value.
Crop situation | Suggested plant × row spacing | Approx. plants/m² | Best fit | Watch closely |
|---|---|---|---|---|
Compact cultivar, cool and dry crop, small to medium heads | 45 × 45 cm | 4.9 | Higher plant population and uniform medium heads | Canopy closing too early |
Medium-vigour cultivar, standard main-head crop | 45 × 50 cm | 4.4 | A practical starting point for many protected beds | Head uniformity and leaf crowding |
Medium to vigorous cultivar, target larger heads | 50 × 50 cm | 4.0 | Better root room and air movement | Avoid excess nitrogen causing overly leafy plants |
Vigorous cultivar or warm/humid planting window | 45 × 60 cm | 3.7 | Wider canopy, disease-prone or less ventilated conditions | Weed-free open soil between plants |
Very large-head programme, only after local trial | 50 × 60 cm | 3.3 | Premium large-head harvest where buyers want it | Lower plant population per unit area |
These are planning ranges, not fixed rules. Temperature, light, soil fertility, irrigation quality, pruning of damaged leaves and cultivar response can all change the result. Test one or two spacings on a small section for a new hybrid before committing the entire structure.
Match the layout to your raised bed width
Raised beds help maintain a defined root zone and prevent workers from stepping near the plants. For broccoli, use a layout that allows every plant to receive similar light and drip water.
Two-row layout for 0.9–1.0 m beds
A two-row arrangement is generally easiest to manage. Keep the two rows about 45–50 cm apart, and keep each row sufficiently away from the bed shoulder. Plant 45–50 cm apart within each row.
This layout works well for 0.9–1.0 m finished beds because workers can inspect both rows from the paths. It also avoids a dense centre canopy that stays wet after irrigation or a humid night.
Two staggered rows for 1.0–1.2 m beds
On wider beds, two rows can be staggered. The plants in one row sit midway between plants in the other row. This distributes the canopy more evenly and can provide each plant with a little more effective room than plants set directly opposite one another.
Keep the measured plant-to-plant and row distance unchanged. Staggering is not a reason to reduce spacing below the chosen plan.
Avoid three rows unless the bed is genuinely wide
Three rows in a narrow broccoli bed often create a shaded, humid centre row. The centre plants may lag, form smaller heads or become harder to inspect. Use three rows only if the finished bed width, row spacing and access allow adequate plant room; measure it before laying drip lines.
For a crop with broad foliage, a simple two-row system is usually more forgiving than trying to increase plant count through an extra row.
Adjust spacing for the planting season and polyhouse climate
Broccoli develops best under cool conditions. In much of India, the more suitable protected-cultivation window is during the cooler part of the year, but the exact period differs between the plains, plateau regions and hills.
When daytime temperatures rise, the crop grows more quickly but head quality may decline. In a polyhouse, heat and trapped humidity add another reason to leave sufficient crop space.
Use the closer end only in favourable cool conditions
You can consider 45 × 45 cm when nights are cool, daytime temperatures are manageable, the cultivar is compact and side ventilation is effective. Closer spacing may support a higher number of medium heads per m², but only if plants remain healthy and receive adequate nutrients and water.
Widen spacing during warmer or humid spells
Choose 50 × 50 cm or 45 × 60 cm when transplanting near the end of the cool season, in locations with warm days, or where rain and humidity keep the canopy wet. Wider spacing improves access for scouting and helps air move through the leaves.
Open side curtains early enough to prevent heat build-up, while retaining insect exclusion where needed. Good ventilation also depends on the structure and side-net arrangement; side insect net should be correctly specified and maintained so tears do not become pest entry points.
If you are deciding between structure types for a location with difficult summer temperatures, compare NVPH and fan-and-pad polyhouses. A fan-and-pad system gives greater climate control, but its crop plan, operating costs and management needs are different.
Mark holes, drip lines and paths before transplanting
A straight planting plan saves time throughout the crop. It makes fertigation checks, disease scouting and harvest faster. Uneven gaps are especially costly in broccoli because the canopy makes missing plants obvious and harvest maturity becomes less uniform.
Follow this simple marking sequence:
- Finish the bed first. Beds should be level along their length, adequately drained and moist but not saturated. Remove old crop roots and plant residues.
- Install and test drip laterals. One lateral for each row is a reliable arrangement. Place emitters so each transplant receives water near, not directly against, the stem.
- Measure row lines. Use a tape, marked rope or planting frame. Measure from row centre to row centre.
- Mark plant positions. Mark each hole at 45 or 50 cm, according to the selected plan. For staggered rows, offset the second row by half the within-row spacing.
- Keep an access path. Paths must be wide enough for harvest crates and spraying equipment without brushing plants unnecessarily.
- Count actual positions. Calculate seedling requirement from marked holes, then add a small number of spare plants for early replacement only.
For example, a 100 m² planted area at 50 × 50 cm holds about 400 plants. At 45 × 45 cm, it holds about 494 plants. Actual counts will be lower where beds end, paths begin and service areas occupy space. Base seedling orders on the marked field layout, not only on the total covered area.
Transplant correctly so spacing delivers its benefit
Correct spacing cannot compensate for stressed, over-aged or poorly hardened seedlings. Use uniform plugs that have been gradually exposed to the conditions inside the polyhouse before transplanting. A weak seedling often remains behind the crop and creates uneven head maturity.
Transplant in the late afternoon or on a relatively cool, cloudy period where possible. Make a hole just large enough for the plug. Set the plug surface level with the bed surface, firm soil gently around it, then irrigate to establish root contact.
Avoid placing the seedling too deep. Soil around the crown can retain moisture and raise the chance of stem or crown problems. Also avoid dry pockets around plugs; a plant that faces moisture stress immediately after transplanting may lose growth momentum.
During the first week, check survival daily. Replace dead or severely stunted plants promptly with same-age spare seedlings. Do not replace gaps much later, as late plants will form heads at a different time and make harvest less efficient.
Broccoli that receives unsuitable temperatures at an early stage can form small premature heads, known as buttoning. Spacing will not solve this problem by itself. For the full set of prevention points, see stopping buttoning in polyhouse broccoli plants.
Inspect canopy spacing through the crop, not only on day one
The original distance remains fixed after transplanting, but canopy conditions can be improved through routine management. Walk the beds at least twice a week and check whether leaves of adjacent plants are packing tightly together, especially around the bed centre and near the side walls.
Look for these warning signs:
- Lower leaves remain wet for long periods after irrigation or condensation.
- Plants in the middle of a bed are visibly smaller than edge plants.
- Leaf stalks are stretched or plants lean strongly towards light.
- Pest or disease symptoms are difficult to see because the canopy is too dense.
- Heads mature unevenly across rows.
Keep paths and bed shoulders clean. Remove only damaged, diseased or heavily senescent leaves when necessary, using clean tools. Do not strip healthy leaves simply to make the crop look open; leaves are needed to build the head.
Nutrient and irrigation management also affect apparent crowding. Excess nitrogen can produce too much soft leafy growth, while irregular water supply may reduce uniformity. Plan these inputs from soil or water tests and crop observation. For disease or pest issues, use integrated measures and seek guidance from your KVK or protected-cultivation agronomist. Follow all pesticide label instructions.
Next steps
Start with 50 × 50 cm if you have no local data for your broccoli hybrid. Shift closer to 45 × 45 cm only for a compact cultivar in reliably cool, well-ventilated conditions. Shift wider for vigorous plants, warm periods or a large-head market.
Before ordering seedlings, mark one representative bed, count the real planting positions and match the number to your market plan. If you are planning or upgrading the protected structure around the crop, review polyhouse material and components and use the kit builder with live weekly rates to check item quantities for your layout.
Frequently asked questions
What is the best broccoli spacing in a polyhouse?
For most main-head broccoli crops, 50 × 50 cm is a safe starting point. Compact cultivars in cool conditions can be planted at 45 × 45 cm, while vigorous crops often need 45 × 60 cm or 50 × 60 cm.
How many broccoli plants can I grow in 1,000 m²?
At 50 × 50 cm, the theoretical population is about 4,000 plants in 1,000 m² of planted bed area. The real number is lower after allowing for paths, bed ends, irrigation headers and service space.
Can broccoli be planted at 30 cm spacing under protection?
Thirty centimetres is usually too close for standard broccoli grown for central heads. It can create a crowded canopy and smaller heads, unless a specific compact cultivar and production system have been locally tested for that density.
Should row spacing be wider than plant spacing for broccoli?
It can be. A 45 cm plant spacing with 50–60 cm between rows is useful where leaves become broad or humidity is high, because it leaves a more open working and ventilation channel between rows.
Does wider spacing always produce bigger broccoli heads?
Wider spacing can support larger heads because each plant has more light, root room and access to water and nutrients. However, cultivar, temperature, seedling age and balanced nutrition still determine whether the head becomes tight and marketable.
