Equipment · Tumkur district, Karnataka
Protected Cultivation Equipment Supplier in Tiptur
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Looking for a protected cultivation equipment supplier in Tiptur? We manufacture GI structures and supply the equipment that goes in them, priced at weekly factory rates. With April highs near 35°C, humid air from June to November and 1,138 mm of rain a year, here is what matters most in Tiptur, and what each item costs this week.
- Pad cooling
- Works: ~29°C inside
- Humid months
- 6
- Shading need
- Medium
- Delivery
- ~3 days

What Tiptur's climate asks of the equipment
| Need | For Tiptur | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 35°C to ~29°C in April |
| Air movement | Air circulation fans | Humid from June to November |
| Shading | White 50% net | Sun peaks at 6.7 kWh/m² in April |
| Rain | Standard gutters | July: ~234 mm |
| Nights | No extra need | 862 m above sea level |
Cooling and air movement
Dry April air lets wet pads cool 35°C down to about 29°C.
What protected crops fetch at mandis near Tiptur
We averaged two years of daily Agmarknet prices from 5 markets in Tumkur district for crops that are grown under cover. Tomato swings the most: about ₹3,180 per quintal in May against ₹816 in August, a 290% difference. Tomato is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Tomato | 3 | ₹1,687/q | May · ₹3,180 | Aug · ₹816 | 290% |
When to plant in Tiptur for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in May; at about 75 days to first harvest, transplant in February.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Tomato | May | ~75 | February | Aug |
Tiptur's weather, month by month
April is the hottest month, with afternoons around 35.1°C; January nights drop to about 13.6°C. July is the wettest (234 mm of 1,138 mm a year), and humidity stays at 75% or more for 6 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.1°C | 13.6°C | 58% | 1 mm | 5.5 | 1.8 |
| Feb | 32.2°C | 15.6°C | 46% | 4 mm | 6.2 | 1.8 |
| Mar | 34.9°C | 19.1°C | 42% | 18 mm | 6.6 | 1.8 |
| Apr | 35.1°C | 21.6°C | 52% | 46 mm | 6.7 | 1.6 |
| May | 32.4°C | 21°C | 67% | 106 mm | 6.4 | 2.4 |
| Jun | 28.1°C | 19.8°C | 79% | 188 mm | 5.3 | 3.6 |
| Jul | 26.7°C | 19.2°C | 82% | 234 mm | 4.7 | 4 |
| Aug | 26.5°C | 18.9°C | 84% | 199 mm | 4.7 | 3.5 |
| Sep | 26.8°C | 18.6°C | 84% | 156 mm | 5.1 | 2.4 |
| Oct | 27.1°C | 18.1°C | 82% | 130 mm | 5.1 | 1.7 |
| Nov | 26.7°C | 16°C | 78% | 47 mm | 4.9 | 1.8 |
| Dec | 27°C | 13.8°C | 71% | 9 mm | 4.9 | 1.9 |
Film and shade nets
Diffused film spreads light; nets add shade where crops need it.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Gutters and rain handling
July brings about 234 mm; gutters and skirting must carry it away.
Doors and entry
Doors and an entry cabin keep pests out as people walk in.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Fan and pad cooling in Tiptur
Pad cooling works by evaporation, so it needs dry air. In April Tiptur averages 35°C at 52% humidity, which pads can bring down to roughly 29°C inside. That is enough for leafy greens and nursery crops through summer.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
An equipment care calendar for Tiptur
- 1
Before April
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 35°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 234 mm.
- 3
June to November
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
November to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Tiptur.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Tiptur
From our Satara factory to Tiptur is about 770 km by road, so a dispatched load normally arrives in about 3 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Tiptur and the rest of Tumkur district
Tiptur is one of the cooler towns in Karnataka (71st hottest of 81), and in the middle for rain (23rd). We also supply 4 other towns in Tumkur district.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Tiptur?
Yes. We dispatch from our Satara factory, about 770 km from Tiptur, and the truck usually arrives in about 3 days.
Does fan and pad cooling work in Tiptur?
Yes. In April the air is dry enough (52%) for pads to bring 35°C down to about 29°C.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
Equipment supply near Tiptur
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Tiptur | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Arsikere | ~30 km | Works (~29°C) | 6 | Apr, 35°C |
| Equipment supplier in Sira | ~90 km | Works (~29°C) | 6 | Apr, 36°C |
| Equipment supplier in Tumkur | ~90 km | Works (~29°C) | 6 | Apr, 36°C |
| Equipment supplier in Chikkamagaluru | ~100 km | Limited | 7 | Apr, 32°C |
| Equipment supplier in Magadi | ~110 km | Works (~29°C) | 6 | Apr, 35°C |
| Equipment supplier in Sakaleshapura | ~110 km | Limited | 8 | Mar, 32°C |











