Equipment · Kannur district, Kerala
Protected Cultivation Equipment Supplier in Panniyannur
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Looking for a protected cultivation equipment supplier in Panniyannur? We manufacture GI structures and supply the equipment that goes in them, priced at weekly factory rates. With March highs near 36°C, humid air from May to December and 2,891 mm of rain a year, here is what matters most in Panniyannur, and what each item costs this week.
- Pad cooling
- Limited here
- Humid months
- 8
- Shading need
- Medium
- Delivery
- ~4 days

Equipment priorities for Panniyannur
| Need | For Panniyannur | Why |
|---|---|---|
| Cooling | Shade net + open curtains | 63% humidity limits pad cooling |
| Air movement | Air circulation fans | Humid from May to December |
| Shading | White 50% net | Sun peaks at 6.5 kWh/m² in March |
| Rain | Wide gutters, funnels, skirting apron | July: ~700 mm |
| Nights | No extra need | — |
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
What protected crops fetch at mandis near Panniyannur
We averaged two years of daily Agmarknet prices from 12 markets in Kannur district for crops that are grown under cover. Tomato swings the most: about ₹3,980 per quintal in December against ₹1,877 in March, a 112% difference. Green chilli is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Cucumber | 18 | ₹3,440/q | Jul · ₹3,871 | Nov · ₹3,164 | 22% |
| Tomato | 9 | ₹2,842/q | Dec · ₹3,980 | Mar · ₹1,877 | 112% |
| Okra (bhindi) | 10 | ₹4,344/q | Dec · ₹4,907 | Jun · ₹3,610 | 36% |
| Green chilli | 6 | ₹6,593/q | Feb · ₹7,025 | Jun · ₹6,323 | 11% |
| Brinjal | 8 | ₹4,199/q | Nov · ₹4,925 | Mar · ₹3,420 | 44% |
| Snake gourd | 5 | ₹3,809/q | Aug · ₹4,370 | Mar · ₹3,323 | 32% |
| Bitter gourd | 9 | ₹5,366/q | Aug · ₹6,625 | Feb · ₹4,184 | 58% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cucumber peaks in July; at about 40 days to first harvest, transplant in May.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Cucumber | Jul, Aug, Sep, Oct | ~40 | May | Nov |
| Tomato | Dec | ~75 | September | Mar |
| Okra (bhindi) | Jan, Feb, Mar, Apr, Aug, Nov, Dec | ~45 | October | Jun |
| Green chilli | Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec | ~75 | November | Jun |
| Brinjal | May, Jun, Aug, Nov | ~60 | September | Mar |
| Snake gourd | May, Aug, Sep | ~55 | June | Mar |
| Bitter gourd | May, Aug | ~55 | June | Feb |
Twelve months of weather in Panniyannur
March is the hottest month, with afternoons around 32.7°C; January nights drop to about 22.2°C. June is the wettest (581 mm of 2,606 mm a year), and humidity stays at 75% or more for 8 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Apr, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 30.7°C | 22.2°C | 66% | 4 mm | 5.6 | 1.7 |
| Feb | 32.1°C | 23.2°C | 63% | 7 mm | 6.2 | 1.9 |
| Mar | 32.7°C | 24.6°C | 66% | 29 mm | 6.5 | 2 |
| Apr | 31.7°C | 25.6°C | 75% | 87 mm | 6.3 | 2 |
| May | 30°C | 25.8°C | 81% | 230 mm | 5.5 | 2.3 |
| Jun | 27.8°C | 25.1°C | 87% | 581 mm | 4.1 | 2.8 |
| Jul | 26.8°C | 24.3°C | 90% | 577 mm | 4 | 2.8 |
| Aug | 26.7°C | 23.8°C | 90% | 417 mm | 4.5 | 2.6 |
| Sep | 27.1°C | 23.8°C | 88% | 272 mm | 5.2 | 2.2 |
| Oct | 27.8°C | 24.1°C | 85% | 256 mm | 5 | 1.8 |
| Nov | 28.5°C | 23.7°C | 79% | 121 mm | 5 | 1.4 |
| Dec | 29.3°C | 22.5°C | 72% | 25 mm | 5.1 | 1.5 |
Cooling and air movement
8 humid months: moving air dries leaves and cuts disease.
Gutters and rain handling
July brings about 700 mm; gutters and skirting must carry it away.
Film and shade nets
Diffused film spreads light; nets add shade where crops need it.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Doors and entry
Heavy rain and humidity: aluminium doors do not swell or warp.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Why we rarely fit fan and pad in Panniyannur
At 63% humidity in March, wet pads would cool Panniyannur's air only a few degrees, so we rarely recommend fan and pad here. Better value: open roll-up curtains, white shade net, and air circulation fans in the humid months.
When to service equipment in Panniyannur
- 1
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 700 mm.
- 2
May to December
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 3
Dry season
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Panniyannur.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Panniyannur
Panniyannur is roughly 930 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Panniyannur in about 4 days, carrying the invoice, the test reports and 100% invoice insurance.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Across Kannur district
Among the 48 towns we supply in Kerala, Panniyannur ranks 12th for summer heat and 5th for yearly rain. Other Kannur district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Panniyannur?
Yes. We dispatch from our Satara factory, about 930 km from Panniyannur, and the truck usually arrives in about 4 days.
Does fan and pad cooling work in Panniyannur?
Not well. At 63% humidity in March, pads cool only a little; a naturally ventilated house with shading and air circulation fans is better value.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
Equipment supply near Panniyannur
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Panniyannur | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Peringathur | ~10 km | Limited | 8 | Mar, 33°C |
| Equipment supplier in Vatakara | ~20 km | Limited | 8 | Mar, 33°C |
| Equipment supplier in Mattannur | ~30 km | Limited | 8 | Mar, 36°C |
| Equipment supplier in Kannur | ~40 km | Limited | 8 | Mar, 36°C |
| Equipment supplier in Pappinisseri | ~40 km | Limited | 8 | Mar, 36°C |
| Equipment supplier in Koyilandy | ~50 km | Limited | 8 | Mar, 34°C |












