Equipment · Bhadradri Kothagudem district, Telangana
Protected Cultivation Equipment Supplier in Palwancha
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Looking for a protected cultivation equipment supplier in Palwancha? We manufacture GI structures and supply the equipment that goes in them, priced at weekly factory rates. With April highs near 41°C, humid air from July to November and 1,090 mm of rain a year, here is what matters most in Palwancha, and what each item costs this week.
- Pad cooling
- Works: ~33°C inside
- Humid months
- 5
- Shading need
- High
- Delivery
- ~4 days

Equipment priorities for Palwancha
| Need | For Palwancha | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 41°C to ~33°C in April |
| Air movement | Air circulation fans | Humid from July to November |
| Shading | Aluminium or double-layer net | Sun peaks at 6.7 kWh/m² in April |
| Rain | Standard gutters | August: ~239 mm |
| Nights | No extra need | — |
Cooling and air movement
Dry April air lets wet pads cool 41°C down to about 33°C.
Local market prices for polyhouse crops near Palwancha
We averaged two years of daily Agmarknet prices from 7 markets in Bhadradri Kothagudem district for crops that are grown under cover. Tomato swings the most: about ₹9,908 per quintal in December against ₹1,499 in January, a 561% difference. Tomato is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Tomato | 7 | ₹3,242/q | Dec · ₹9,908 | Jan · ₹1,499 | 561% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Tomato | Dec | ~75 | September | Jan |
Palwancha's weather, month by month
April is the hottest month, with afternoons around 40.7°C; December nights drop to about 15.2°C. August is the wettest (239 mm of 1,090 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 30.6°C | 15.5°C | 62% | 7 mm | 4.8 | 1.4 |
| Feb | 34.7°C | 18°C | 54% | 7 mm | 5.6 | 1.8 |
| Mar | 38.5°C | 21.9°C | 48% | 13 mm | 6.1 | 2.1 |
| Apr | 40.7°C | 25.2°C | 48% | 24 mm | 6.7 | 2.6 |
| May | 40.7°C | 27.3°C | 48% | 47 mm | 6.5 | 2.7 |
| Jun | 34.5°C | 25.7°C | 67% | 152 mm | 5.1 | 2.8 |
| Jul | 31.5°C | 24.2°C | 79% | 229 mm | 4.3 | 2.7 |
| Aug | 30°C | 23.6°C | 85% | 239 mm | 4.3 | 2.4 |
| Sep | 29.9°C | 23.3°C | 86% | 179 mm | 4.7 | 1.8 |
| Oct | 29.7°C | 21.5°C | 82% | 143 mm | 4.9 | 1.4 |
| Nov | 28.8°C | 17.9°C | 78% | 37 mm | 4.8 | 1.4 |
| Dec | 28.6°C | 15.2°C | 70% | 13 mm | 4.6 | 1.4 |
Film and shade nets
41°C highs and 6.7 kWh/m² of sun: shade and reflective nets matter here.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Gutters and rain handling
August brings about 239 mm; gutters and skirting must carry it away.
Doors and entry
Doors and an entry cabin keep pests out as people walk in.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Fan and pad cooling in Palwancha
Pad cooling works by evaporation, so it needs dry air. In April Palwancha averages 41°C at 48% humidity, which pads can bring down to roughly 33°C inside. That is enough for leafy greens and nursery crops through summer.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
When to service equipment in Palwancha
- 1
Before April
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 41°C peak.
- 2
Before August
Clear gutters and funnels, re-seat the side skirting apron and check film tension; August brings about 239 mm.
- 3
July to November
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
November to January
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Palwancha.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Palwancha
From our Satara factory to Palwancha is about 930 km by road, so a dispatched load normally arrives in about 4 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Across Bhadradri Kothagudem district
Among the 40 towns we supply in Telangana, Palwancha ranks 24th for summer heat and 5th for yearly rain. Other Bhadradri Kothagudem district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Palwancha?
Yes. We dispatch from our Satara factory, about 930 km from Palwancha, and the truck usually arrives in about 4 days.
Does fan and pad cooling work in Palwancha?
Yes. In April the air is dry enough (48%) for pads to bring 41°C down to about 33°C.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
Equipment supply near Palwancha
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Palwancha | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Kothagudem | ~10 km | Works (~33°C) | 5 | Apr, 41°C |
| Equipment supplier in Bhadrachalam | ~30 km | Works (~33°C) | 5 | Apr, 41°C |
| Equipment supplier in Manuguru | ~50 km | Works (~33°C) | 5 | May, 41°C |
| Equipment supplier in Yellandu | ~50 km | Works (~33°C) | 5 | Apr, 41°C |
| Equipment supplier in Tiruvuru | ~70 km | Works (~34°C) | 5 | Apr, 41°C |
| Equipment supplier in Khammam | ~90 km | Works (~33°C) | 5 | May, 41°C |











