Equipment · Madhepura district, Bihar
Protected Cultivation Equipment Supplier in Madhepura
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Looking for a protected cultivation equipment supplier in Madhepura? We manufacture GI structures and supply the equipment that goes in them, priced at weekly factory rates. With May highs near 39°C, humid air from July to October and 1,165 mm of rain a year, here is what matters most in Madhepura, and what each item costs this week.
- Pad cooling
- Works: ~32°C inside
- Humid months
- 4
- Shading need
- High
- Delivery
- ~7 days

Equipment priorities for Madhepura
| Need | For Madhepura | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 39°C to ~32°C in May |
| Air movement | Air circulation fans | Humid from July to October |
| Shading | Aluminium or double-layer net | Sun peaks at 6.3 kWh/m² in April |
| Rain | Standard gutters | July: ~317 mm |
| Nights | No extra need | — |
Cooling and air movement
Dry May air lets wet pads cool 39°C down to about 32°C.
What protected crops fetch at mandis near Madhepura
Prices at the mandis in nearby districts (Saharsa, Supaul, Araria, Bhagalpur) follow a clear yearly pattern. Cucumber is the extreme case, from ₹1,773 per quintal in June up to ₹4,025 in November (127% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Okra (bhindi) | 10 | ₹1,598/q | Oct · ₹1,892 | Jun · ₹1,099 | 72% |
| Brinjal | 9 | ₹2,346/q | Jun · ₹2,610 | Nov · ₹2,133 | 22% |
| Bitter gourd | 6 | ₹2,055/q | Nov · ₹2,483 | Jul · ₹1,584 | 57% |
| Tomato | 9 | ₹3,176/q | Aug · ₹3,914 | Jun · ₹2,429 | 61% |
| Green chilli | 9 | ₹4,532/q | Aug · ₹5,626 | Jun · ₹2,891 | 95% |
| Cucumber | 4 | ₹2,983/q | Nov · ₹4,025 | Jun · ₹1,773 | 127% |
When to plant in Madhepura for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, okra (bhindi) peaks in October; at about 45 days to first harvest, transplant in August.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Okra (bhindi) | Aug, Oct, Nov | ~45 | August | Jun |
| Brinjal | Jun, Sep, Oct | ~60 | April | Nov |
| Bitter gourd | Sep, Oct, Nov | ~55 | September | Jul |
| Tomato | Aug | ~75 | May | Jun |
| Green chilli | Jul, Aug | ~75 | May | Jun |
| Cucumber | Nov | ~40 | September | Jun |
Madhepura month by month
May is the hottest month, with afternoons around 39°C; January nights drop to about 8.3°C. July is the wettest (317 mm of 1,165 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 23.1°C | 8.3°C | 53% | 7 mm | 3.2 | 1.6 |
| Feb | 28°C | 12°C | 44% | 10 mm | 4.5 | 1.9 |
| Mar | 34.4°C | 17.6°C | 32% | 19 mm | 5.6 | 2.1 |
| Apr | 38.6°C | 23.2°C | 34% | 40 mm | 6.3 | 2.2 |
| May | 39°C | 26.3°C | 47% | 97 mm | 6.1 | 2.3 |
| Jun | 37.2°C | 27.6°C | 62% | 182 mm | 5.3 | 2.6 |
| Jul | 32.7°C | 26.3°C | 82% | 317 mm | 4.5 | 2.5 |
| Aug | 32°C | 25.9°C | 85% | 217 mm | 4.8 | 2.1 |
| Sep | 31°C | 24.6°C | 86% | 211 mm | 4.6 | 1.9 |
| Oct | 29.9°C | 20.6°C | 79% | 60 mm | 4.5 | 1.3 |
| Nov | 27.2°C | 14.9°C | 69% | 3 mm | 3.9 | 1.2 |
| Dec | 23.6°C | 9.9°C | 62% | 2 mm | 3.1 | 1.2 |
Film and shade nets
39°C highs and 6.3 kWh/m² of sun: shade and reflective nets matter here.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Gutters and rain handling
July brings about 317 mm; gutters and skirting must carry it away.
Doors and entry
Doors and an entry cabin keep pests out as people walk in.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Fan and pad cooling in Madhepura
Pad cooling works by evaporation, so it needs dry air. In May Madhepura averages 39°C at 47% humidity, which pads can bring down to roughly 32°C inside. That is enough for leafy greens and nursery crops through summer.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
When to service equipment in Madhepura
- 1
Before May
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 39°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 317 mm.
- 3
July to October
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
Dry season
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Madhepura.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Madhepura
We dispatch from Degaon near Satara, about 2,070 km from Madhepura by road. Expect the material in about 7 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Across Madhepura district
Among the 71 towns we supply in Bihar, Madhepura ranks 60th for summer heat and 13th for yearly rain. Other Madhepura district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Madhepura?
Yes. We dispatch from our Satara factory, about 2,070 km from Madhepura, and the truck usually arrives in about 7 days.
Does fan and pad cooling work in Madhepura?
Yes. In May the air is dry enough (47%) for pads to bring 39°C down to about 32°C.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
Equipment supply near Madhepura
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Madhepura | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Murliganj | ~30 km | Works (~32°C) | 4 | May, 39°C |
| Equipment supplier in Saharsa | ~30 km | Works (~32°C) | 4 | May, 39°C |
| Equipment supplier in Supaul | ~40 km | Works (~32°C) | 4 | May, 39°C |
| Equipment supplier in Forbesganj | ~80 km | Works (~31°C) | 4 | May, 37°C |
| Equipment supplier in Munger | ~90 km | Works (~32°C) | 4 | May, 41°C |
| Equipment supplier in Naugachhia | ~90 km | Works (~32°C) | 4 | May, 40°C |











