Equipment · Mandya district, Karnataka
Protected Cultivation Equipment Supplier in Maddur
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
The frame and film make a polyhouse; the equipment makes it work. For growers in Maddur we supply every piece from one factory: exhaust fans and cellulose pads for evaporative cooling, air circulation fans, manual gear units for roll-up curtains, shade and insect nets, gutters, doors and the clamps and couplers that hold it all. This page sorts them by what Maddur's climate asks for first.
- Pad cooling
- Works: ~28°C inside
- Humid months
- 6
- Shading need
- Medium
- Delivery
- ~4 days

Equipment priorities for Maddur
| Need | For Maddur | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 36°C to ~28°C in March |
| Air movement | Air circulation fans | Humid from June to November |
| Shading | White 50% net | Sun peaks at 6.6 kWh/m² in March |
| Rain | Standard gutters | 884 mm a year |
| Nights | No extra need | 662 m above sea level |
Cooling and air movement
Dry March air lets wet pads cool 36°C down to about 28°C.
What protected crops fetch at mandis near Maddur
Prices at the mandis in Mandya district follow a clear yearly pattern. Tomato is the extreme case, from ₹1,006 per quintal in March up to ₹1,967 in December (96% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Cucumber | 3 | ₹1,529/q | Jul · ₹2,042 | Nov · ₹1,116 | 83% |
| Tomato | 3 | ₹1,641/q | Dec · ₹1,967 | Mar · ₹1,006 | 96% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cucumber peaks in July; at about 40 days to first harvest, transplant in May.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Cucumber | Jul | ~40 | May | Nov |
| Tomato | May, Jul, Aug, Oct, Dec | ~75 | September | Mar |
Twelve months of weather in Maddur
March is the hottest month, with afternoons around 35.9°C; January nights drop to about 14.8°C. September is the wettest (138 mm of 884 mm a year), and humidity stays at 75% or more for 6 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Jun, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 30.6°C | 14.8°C | 58% | 2 mm | 5.5 | 2.1 |
| Feb | 33.5°C | 16.7°C | 46% | 4 mm | 6.3 | 2.2 |
| Mar | 35.9°C | 20.1°C | 41% | 20 mm | 6.6 | 2.1 |
| Apr | 35.7°C | 22.5°C | 51% | 64 mm | 6.6 | 1.8 |
| May | 32.6°C | 21.6°C | 68% | 118 mm | 6.2 | 2.4 |
| Jun | 28.9°C | 20°C | 77% | 97 mm | 5.3 | 3.8 |
| Jul | 28°C | 19.5°C | 80% | 120 mm | 4.8 | 4.2 |
| Aug | 27.9°C | 19.2°C | 81% | 116 mm | 4.8 | 3.7 |
| Sep | 28.1°C | 19.1°C | 81% | 138 mm | 5.3 | 2.7 |
| Oct | 27.8°C | 18.8°C | 81% | 135 mm | 5 | 1.8 |
| Nov | 27.4°C | 16.9°C | 78% | 56 mm | 4.7 | 1.9 |
| Dec | 28.2°C | 14.9°C | 71% | 14 mm | 4.8 | 2.2 |
Film and shade nets
Diffused film spreads light; nets add shade where crops need it.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Gutters and rain handling
About 884 mm of rain a year.
Doors and entry
Doors and an entry cabin keep pests out as people walk in.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Fan and pad cooling in Maddur
Pad cooling works by evaporation, so it needs dry air. In March Maddur averages 36°C at 41% humidity, which pads can bring down to roughly 28°C inside. That is enough for leafy greens and nursery crops through summer.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
When to service equipment in Maddur
- 1
Before March
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 36°C peak.
- 2
June to November
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 3
November to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Maddur.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Maddur
Maddur is roughly 890 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Maddur in about 4 days, carrying the invoice, the test reports and 100% invoice insurance.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Across Mandya district
Among the 81 towns we supply in Karnataka, Maddur ranks 48th for summer heat and 26th for yearly rain. Other Mandya district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Maddur?
Yes. We dispatch from our Satara factory, about 890 km from Maddur, and the truck usually arrives in about 4 days.
Does fan and pad cooling work in Maddur?
Yes. In March the air is dry enough (41%) for pads to bring 36°C down to about 28°C.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
What equipment does a naturally ventilated polyhouse need?
Roll-up side curtains with manual gear units, side insect net, roof film with aluminium profiles and springs, gutters, doors and an optional entry cabin. Air circulation fans and shade net are optional upgrades.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Equipment supply near Maddur
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Maddur | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Mandya | ~20 km | Works (~28°C) | 6 | Mar, 36°C |
| Equipment supplier in Malavalli | ~30 km | Works (~28°C) | 6 | Mar, 36°C |
| Equipment supplier in Ramanagaram | ~40 km | Works (~30°C) | 6 | Apr, 36°C |
| Equipment supplier in Magadi | ~60 km | Works (~29°C) | 6 | Apr, 35°C |
| Equipment supplier in Shrirangapattana | ~60 km | Works (~28°C) | 6 | Mar, 36°C |
| Equipment supplier in Mysore | ~70 km | Works (~28°C) | 6 | Mar, 36°C |











