Equipment · Kolar district, Karnataka
Protected Cultivation Equipment Supplier in Kolar
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
The frame and film make a polyhouse; the equipment makes it work. For growers in Kolar we supply every piece from one factory: air circulation fans, manual gear units for roll-up curtains, shade and insect nets, gutters, doors and the clamps and couplers that hold it all. This page sorts them by what Kolar's climate asks for first.
- Pad cooling
- Limited here
- Humid months
- 5
- Shading need
- Medium
- Delivery
- ~4 days

Equipment priorities for Kolar
| Need | For Kolar | Why |
|---|---|---|
| Cooling | Shade net + open curtains | 52% humidity limits pad cooling |
| Air movement | Air circulation fans | Humid from August to December |
| Shading | White 50% net | Sun peaks at 6.7 kWh/m² in April |
| Rain | Standard gutters | 877 mm a year |
| Nights | No extra need | 821 m above sea level |
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Mandi price seasons around Kolar
We averaged two years of daily Agmarknet prices from 12 markets in Kolar district for crops that are grown under cover. Beans swings the most: about ₹6,499 per quintal in May against ₹2,537 in February, a 156% difference. Green chilli is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Capsicum | 12 | ₹2,646/q | Jul · ₹3,642 | Apr · ₹2,030 | 79% |
| Tomato | 18 | ₹1,305/q | Dec · ₹1,822 | Mar · ₹808 | 125% |
| Beans | 16 | ₹4,187/q | May · ₹6,499 | Feb · ₹2,537 | 156% |
| Brinjal | 14 | ₹1,528/q | Nov · ₹2,068 | Mar · ₹1,025 | 102% |
| Green chilli | 13 | ₹3,265/q | Jul · ₹3,916 | Dec · ₹2,637 | 49% |
| Ridge gourd | 11 | ₹1,946/q | Nov · ₹2,330 | Mar · ₹1,457 | 60% |
| Cucumber | 13 | ₹984/q | Jul · ₹1,257 | Nov · ₹733 | 71% |
| Cabbage | 12 | ₹702/q | Dec · ₹906 | Apr · ₹486 | 86% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, capsicum peaks in July; at about 90 days to first harvest, transplant in April.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Capsicum | Jun, Jul | ~90 | April | Apr |
| Tomato | Nov, Dec | ~75 | September | Mar |
| Beans | May, Jun | ~50 | March | Feb |
| Brinjal | Jun, Nov | ~60 | September | Mar |
| Green chilli | Feb, Mar, Apr, Jul, Aug | ~75 | April | Dec |
| Ridge gourd | Jun, Jul, Oct, Nov, Dec | ~50 | September | Mar |
| Cucumber | Jul, Aug | ~40 | May | Nov |
| Cabbage | May, Jun, Nov, Dec | ~75 | September | Apr |
Twelve months of weather in Kolar
April is the hottest month, with afternoons around 35.4°C; January nights drop to about 13.5°C. October is the wettest (157 mm of 877 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Jun, Jul, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 27.9°C | 13.5°C | 68% | 5 mm | 5.2 | 2.4 |
| Feb | 31.3°C | 14.9°C | 56% | 6 mm | 6.1 | 2.5 |
| Mar | 34.4°C | 18.2°C | 48% | 17 mm | 6.5 | 2.6 |
| Apr | 35.4°C | 21°C | 52% | 51 mm | 6.7 | 2.4 |
| May | 33.2°C | 21.6°C | 63% | 102 mm | 6.4 | 2.7 |
| Jun | 29.8°C | 20°C | 72% | 75 mm | 5.7 | 4.3 |
| Jul | 28.9°C | 19.4°C | 74% | 96 mm | 5.2 | 4.6 |
| Aug | 28.5°C | 19.2°C | 77% | 114 mm | 5.2 | 4.1 |
| Sep | 28°C | 19.1°C | 79% | 151 mm | 5.3 | 2.8 |
| Oct | 27°C | 18.4°C | 82% | 157 mm | 5 | 2 |
| Nov | 25.8°C | 16.3°C | 82% | 76 mm | 4.5 | 2.4 |
| Dec | 25.8°C | 14.2°C | 78% | 27 mm | 4.4 | 2.5 |
Cooling and air movement
5 humid months: moving air dries leaves and cuts disease.
Gutters and rain handling
About 877 mm of rain a year.
Film and shade nets
Diffused film spreads light; nets add shade where crops need it.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Doors and entry
Doors and an entry cabin keep pests out as people walk in.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Why we rarely fit fan and pad in Kolar
At 52% humidity in April, wet pads would cool Kolar's air only a few degrees, so we rarely recommend fan and pad here. Better value: open roll-up curtains, white shade net, and air circulation fans in the humid months.
When to service equipment in Kolar
- 1
August to December
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 2
November to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Kolar.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Kolar
From our Satara factory to Kolar is about 910 km by road, so a dispatched load normally arrives in about 4 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Across Kolar district
Among the 81 towns we supply in Karnataka, Kolar ranks 64th for summer heat and 31st for yearly rain. Other Kolar district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Kolar?
Yes. We dispatch from our Satara factory, about 910 km from Kolar, and the truck usually arrives in about 4 days.
Does fan and pad cooling work in Kolar?
Not well. At 52% humidity in April, pads cool only a little; a naturally ventilated house with shading and air circulation fans is better value.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
What equipment does a naturally ventilated polyhouse need?
Roll-up side curtains with manual gear units, side insect net, roof film with aluminium profiles and springs, gutters, doors and an optional entry cabin. Air circulation fans and shade net are optional upgrades.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Equipment supply near Kolar
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Kolar | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Malur | ~30 km | Limited | 5 | Apr, 35°C |
| Equipment supplier in Robertson Pet | ~30 km | Limited | 5 | Apr, 35°C |
| Equipment supplier in Srinivaspur | ~30 km | Works (~29°C) | 5 | Apr, 36°C |
| Equipment supplier in Mulbagal | ~40 km | Limited | 5 | Apr, 35°C |
| Equipment supplier in Sidlaghatta | ~50 km | Works (~29°C) | 5 | Apr, 36°C |
| Equipment supplier in Punganur | ~70 km | Works (~30°C) | 4 | Apr, 37°C |












