Polyhouse material · Yavatmal district, Maharashtra
Polyhouse Material Supplier in Pusad
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Kryzen supplies complete polyhouse material kits to growers in Pusad straight from our factory near Satara: ISI-marked GI pipes, 250-micron diffused polyfilm, insect and shade nets, gutters and every clamp and bolt. Pusad is about 570 km away by road, so a kit dispatched from the factory usually reaches you in about 3 days.
- Distance from factory
- ~570 km by road
- Delivery after dispatch
- ~3 days
- Hottest month
- May, ~43°C
- Climate pick
- NVPH + fan & pad
Four structures, one supplier for Pusad
Each kit comes with the full GI structure, covering and fittings. Here is how each one suits Pusad's climate.

Naturally ventilated polyhouse
Best fitFilm roof keeps July–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Pusad.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Plants you can grow in Pusad
Crops that suit protected cultivation in Pusad, with the structure we would grow each one in.

Coloured capsicum
NVPH
Grow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic)
NVPH
Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhouse
Pads bring May afternoons down to about 30°C, so greens can grow through summer.

Gerbera and rose
NVPH
Cut flowers with year-round demand from city florists and events.
🌱 Vegetable seedlings
Square nethouse
Raise nursery seedlings from October to February for the local planting season.
Why choose Polyhouse Construction over a local fabricator in Pusad
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | ✓30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | ✓Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | ✓15-year manufacturing warranty | Rarely a written warranty |
| Engineering | ✓In-house engineering team | No design or load checks |
| Manufacturing | ✓In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | ✓32-point QA checklist for every part | Visual check at best |
| Lab certificate | ✓Lab test certificate with every dispatch | Not provided |
| Technical sheet | ✓Technical data sheet for every product | Not available |
| Material match | ✓Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | ✓Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | ✓Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | ✓Backed by industry leader Kryzen Biotech | Single-owner workshop |
A year of weather in Pusad, month by month
Plan film, shading and planting around these months. Open-mesh nethouses work best from October to February; keep curtains and vents ready for the humid stretch from July to October.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~43°C highs | ||||||||||||
| Strongest sun | 7 kWh/m²/day | ||||||||||||
| Wettest month | ~261 mm | ||||||||||||
| Humid (75%+) | July–October | ||||||||||||
| Nethouse season | October–February |
From NASA POWER monthly averages for Pusad.
Which materials suit Pusad's climate
Summer peaks in May, when Pusad averages about 43°C in the afternoon at 27% humidity. Yearly rainfall is around 926 mm. This is how we match the material list to that weather.
| Part | What we supply | Why in Pusad |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 7 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 43°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 926 mm of rain a year, so standard gutters are enough. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from July to October; open the curtains fully in those months. |
Local market prices for polyhouse crops near Pusad
Across 12 mandis in nearby districts (Nashik, Akola), 8 polyhouse and nethouse crops trade regularly. Tomato has the most arrivals; Coriander (leaves) has the widest price swing (298%), peaking in October.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Tomato | 17 | ₹1,327/q | Jun · ₹1,941 | Mar · ₹712 | 173% |
| Methi (fenugreek leaves) | 9 | ₹1,944/q | Jun · ₹3,207 | Jan · ₹944 | 240% |
| Coriander (leaves) | 7 | ₹2,649/q | Oct · ₹5,043 | Jan · ₹1,266 | 298% |
| Cucumber | 14 | ₹2,214/q | Dec · ₹2,990 | Mar · ₹1,556 | 92% |
| Brinjal | 13 | ₹3,433/q | Nov · ₹5,756 | Apr · ₹2,218 | 160% |
| Bitter gourd | 11 | ₹3,289/q | Jun · ₹4,796 | Oct · ₹1,848 | 160% |
| Cabbage | 8 | ₹982/q | Nov · ₹1,426 | Apr · ₹444 | 221% |
| Cauliflower | 7 | ₹1,288/q | Nov · ₹1,619 | Apr · ₹898 | 80% |
Timing your crop for the Pusad market
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in June; at about 75 days to first harvest, transplant in March.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Tomato | Jun, Jul, Aug | ~75 | March | Mar |
| Methi (fenugreek leaves) | Jun, Oct | ~25 | May | Jan |
| Coriander (leaves) | Oct | ~35 | August | Jan |
| Cucumber | Jun, Dec | ~40 | October | Mar |
| Brinjal | Nov, Dec | ~60 | September | Apr |
| Bitter gourd | Jan, Jun | ~55 | April | Oct |
| Cabbage | Jun, Nov | ~75 | August | Apr |
| Cauliflower | Jun, Jul, Nov | ~75 | August | Apr |
Pusad's weather, month by month
May is the hottest month, with afternoons around 42.6°C; December nights drop to about 12.4°C. July is the wettest (261 mm of 926 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.4°C | 12.5°C | 41% | 10 mm | 4.7 | 1.7 |
| Feb | 33.5°C | 16.2°C | 31% | 7 mm | 5.6 | 1.9 |
| Mar | 37.3°C | 20.3°C | 27% | 20 mm | 6.3 | 2 |
| Apr | 41.3°C | 24.9°C | 22% | 10 mm | 6.9 | 2.3 |
| May | 42.6°C | 27.9°C | 27% | 16 mm | 7 | 3.7 |
| Jun | 35.5°C | 25.5°C | 59% | 165 mm | 5.4 | 3.8 |
| Jul | 30.5°C | 22.9°C | 79% | 261 mm | 4.3 | 3.6 |
| Aug | 29.1°C | 22.3°C | 84% | 219 mm | 4.2 | 3.1 |
| Sep | 29.3°C | 21.8°C | 84% | 158 mm | 4.8 | 2.1 |
| Oct | 29.4°C | 18.9°C | 75% | 47 mm | 5.1 | 1.6 |
| Nov | 28.7°C | 15.2°C | 66% | 11 mm | 4.8 | 1.5 |
| Dec | 28.4°C | 12.4°C | 52% | 2 mm | 4.5 | 1.6 |
Getting the material to Pusad
Pusad is about 570 km by road from our factory at Degaon, Satara, on the Pune–Bangalore highway. Once your order is packed, the truck usually reaches Pusad in about 3 days, with the invoice and test reports.
Each vehicle is insured for the full invoice value. Share the farm PIN code and access road details so we send a truck that can reach the site.
Subsidy on polyhouse material in Maharashtra
Under the Mission for Integrated Development of Horticulture (MIDH), farmers in Maharashtra can get 50% of the government cost norm for naturally ventilated polyhouses (₹1,000–1,200 per m²), fan and pad polyhouses (₹1,500–1,800 per m²) and nethouses (₹710 per m²), on up to 2,500 m² per farmer. The subsidy is worked out on the government cost norm for your structure and size, not on your bill.
Commercial projects above 2,500 m² can apply to the National Horticulture Board for a credit-linked subsidy of 50% of the eligible project cost, up to ₹100 lakh per project. Both schemes want materials that meet BIS standards: our GI pipes carry the ISI mark and test reports ship with every order. Apply through the Maharashtra horticulture department or your district horticulture officer before you buy.
Get polyhouse material from India's biggest CEA manufacturing company
Choose your structure and size, and get the complete material list in a minute.
FAQs
Do you deliver polyhouse material to Pusad?
Yes. We dispatch from our factory at Degaon, Satara, about 570 km from Pusad by road, and the truck usually arrives in about 3 days. Every load is insured for the invoice value.
Which polyhouse suits Pusad?
A naturally ventilated polyhouse for vine crops, and fan and pad cooling if you grow greens through May: the air is dry enough for pads to bring 43°C down to about 30°C.
What can I grow in a polyhouse in Pusad?
coloured capsicum, cucumber (parthenocarpic), lettuce and leafy greens, gerbera and rose, among others. The right crop depends on your market, water and the season you plant.
Is there a subsidy for polyhouse material in Maharashtra?
Yes. NHM / MIDH pays 50% of the cost norm on up to 2,500 m² per farmer, and NHB gives a 50% credit-linked subsidy for projects above 2,500 m². Apply before buying; we provide the quotation, ISI-marked material and test reports the claim needs.
What warranty do the materials carry?
GI pipes carry a 15-year warranty, polyfilm 2.5 years and nets 3 years.
Can I buy only a few items, like film or nets?
Yes. Use Buy individual items to order film, nets, fittings or pipes on their own, for repairs or an extension.
Polyhouse material near Pusad
Neighbouring towns we deliver to from the same route, and how their climate compares with Pusad.
| Town | From Pusad | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Umarkhed | ~50 km | May, 43°C | 888 mm | NVPH + fan & pad |
| Polyhouse material in Mangrulpir | ~70 km | May, 43°C | 935 mm | NVPH + fan & pad |
| Polyhouse material in Washim | ~70 km | May, 42°C | 873 mm | NVPH + fan & pad |
| Polyhouse material in Wadgaon Road | ~100 km | May, 44°C | 1,013 mm | NVPH + fan & pad |
| Polyhouse material in Yavatmal | ~100 km | May, 44°C | 1,013 mm | NVPH + fan & pad |
| Polyhouse material in Mukhed | ~110 km | May, 42°C | 860 mm | NVPH + fan & pad |
Want it built as well? Read about polyhouse construction in Pusad on the Kryzen blog.
