ਇਹ ਕਿਵੇਂ ਕੰਮ ਕਰਦਾ ਹੈਵੱਖਰੀ ਸਮੱਗਰੀ ਖਰੀਦੋ

Types of Polyhouse Structure for Indian Farms: How to Choose

Polyhouse Constructions Agronomy Desk · 12 ਨਵੰ 2026

Choosing among the types of polyhouse structure is not only about the roof shape. First decide how the house will manage heat and humidity: through natural ventilation or powered cooling. Then choose a roof profile, such as gothic or saw-tooth, that suits your rainfall, wind and site.

For many vegetable growers in moderate Indian climates, a naturally ventilated polyhouse (NVPH) with roll-up side curtains and a ridge vent is the practical starting point. A fan-and-pad polyhouse is suitable where close climate control is essential and reliable electricity, water and high-value crop markets are available. Gothic and saw-tooth are structural roof formats; they can be part of naturally ventilated or more controlled designs depending on the plan.

Start with the two main categories: ventilation and cooling

Every structure must remove solar heat, humid air and crop transpiration. The key difference is the method used.

Naturally ventilated polyhouse (NVPH)

An NVPH uses side openings, insect nets, roll-up curtains and roof or ridge vents. Warm air rises and leaves from the top vent, while fresh air enters through the sides. It has no cooling pad and exhaust-fan system as its main cooling method.

It is widely used for capsicum, cucumber, tomato, gerbera, leafy vegetables, nursery raising and other crops, subject to local climate and crop variety. In cooler or moderate climates, it can give a workable protected environment with lower operational complexity than a climate-controlled house.

An NVPH needs good site planning. Air movement falls sharply if the house is blocked by buildings, dense trees or another structure too close to its side opening. Vent area, insect-net resistance, side-curtain height and ridge design all matter. Read more about what an NVPH is before finalising the format.

Climate-controlled fan-and-pad polyhouse

A fan-and-pad polyhouse uses exhaust fans on one end and wet cellulose cooling pads on the other. Fans pull outside air through the wet pads. Evaporation cools the incoming air, then the air moves through the crop and exits through the fans.

This system offers more predictable cooling in hot, dry conditions. It is commonly considered for premium crops, propagation, specialised floriculture and intensive production where the crop's value can support electricity, maintenance and management costs.

However, cooling performance changes with weather. It works best when the outside air is hot and relatively dry. During humid monsoon weather, evaporation provides less cooling. It also needs dependable three-phase power or a suitable backup, clean water, drainage, regular pad cleaning and properly maintained fans. Learn the working principle in this guide to fan-and-pad polyhouses.

Structure category

How temperature is managed

Best fit

Main requirements

Important limitation

Naturally ventilated polyhouse

Side ventilation, roll-up curtains and roof/ridge vent

Many vegetable and flower farms in moderate climates

Good orientation, open site, adequate vents and insect exclusion

Cannot hold a fixed temperature during peak heat

Fan-and-pad polyhouse

Exhaust fans draw air through wet cooling pads

High-value, climate-sensitive crops with reliable utilities

Electricity, water quality, drainage, controls and maintenance

Cooling reduces in humid weather; operating cost is higher

Nethouse

Shade net and insect net reduce sun and pest entry

Nurseries, hardening, shade-tolerant crops and lower-protection needs

Correct shade percentage and sound anchoring

Does not provide rain protection like polyfilm

Naturally ventilated roof profiles: standard, gothic and saw-tooth

After selecting natural ventilation, decide the roof profile. The profile affects rainwater runoff, internal air volume, vent placement, wind response and fabrication details.

Standard curved or round-arch profile

A curved arch is a familiar format for many polyhouses. It is generally used in single-span or multi-span layouts. In a multi-span structure, gutters connect the spans and carry rainwater out.

This profile can be suitable for many sites when the design uses correct structural members, bracing, foundations and drainage. Do not select it only because it looks simpler. The crop canopy height, expected rainfall and wind speed should guide gutter and ridge dimensions.

Gothic arch profile

A gothic arch has a pointed roof apex rather than a fully rounded crown. Its steeper roof helps shed rain quickly and reduces the chance of water standing on the cover. This can be useful in high-rainfall areas and in places where rain occurs with strong wind.

The taller central profile can also increase air volume above the crop. More volume does not replace ventilation, but it can help reduce sudden temperature and humidity swings compared with a very low roof. Proper film tension and strong joints are still essential. See the detailed guide on gothic arch polyhouse design for wind and rain.

Saw-tooth profile

A saw-tooth polyhouse has a stepped roof arrangement. Its high-level openings are intended to release hot air naturally. Because hot air rises, this format can improve natural exhaust when roof vents are correctly designed and the site allows wind movement.

Saw-tooth structures can be useful in warm regions where heat removal is a major concern, particularly for larger naturally ventilated blocks. They demand careful engineering. The vent opening must resist rain entry, insect nets must be securely fixed, and the roof must manage wind uplift. A poor saw-tooth design can admit rain or lose its ventilation advantage.

A saw-tooth roof is not automatically better for every farm. On an exposed, cyclone-prone or very windy plot, wind load, anchoring and bracing may take priority over the desire for a larger roof opening. Review when a saw-tooth polyhouse is suitable before choosing it.

Where nethouses fit in the decision

A nethouse is different from a polyfilm-covered polyhouse. It normally uses shade net on the roof and sides, with insect net where pest exclusion is required. It lowers light intensity and offers airflow, but it does not provide the same rain protection, temperature buffering or winter protection as a polyfilm cover.

Square or flat nethouses are often selected for simple nursery and shade applications. Curved nethouses can improve water runoff and may be more appropriate in rainy locations. The right shade level depends on crop and season. Too much shade can stretch plants, weaken flowering and reduce yield; too little can scorch sensitive plants.

Consider a nethouse when:

  • You are raising vegetable seedlings, ornamentals or planting material.
  • Your crop needs filtered light rather than rain protection.
  • You want a lower-complexity protected structure.
  • Your local monsoon crop plan can tolerate rain or the crop is seasonal.

Choose a polyfilm-covered house instead when rain exclusion, a more stable root-zone and foliage environment, or off-season high-value production is central to your business. Compare the two directly in NVPH versus nethouse.

Match the structure to your climate and crop

There is no one best structure for all Indian districts. A protected-cultivation plan should start with the difficult season, not the easiest one. Ask whether your crop must survive peak April-May heat, prolonged monsoon humidity, cold nights, strong coastal winds or intense winter fog.

Farm condition

Structure direction to assess

Why

Moderate temperatures, good natural wind, vegetables such as capsicum or cucumber

NVPH with adequate side and ridge ventilation

Balances protection, airflow and operating simplicity

Hot and dry summer, high-value crop, reliable power and water

Fan-and-pad polyhouse

Evaporative cooling can reduce incoming air temperature effectively in dry weather

Hot area with a need for strong natural heat exhaust

Saw-tooth NVPH, after engineering review

High-level vents can discharge hot air

Heavy monsoon rainfall

Gothic or adequately sloped profile with robust gutters and drainage

Faster runoff and less water accumulation on the cover

Nursery, hardening or crops needing shade

Flat or curved nethouse

Provides filtered light and airflow

High wind, coastal or cyclone exposure

Site-specific engineered profile and anchoring

Wind load and corrosion protection become major design factors

Crop value also changes the decision. A low-margin crop rarely carries the financial risk of a complex cooling system unless there is a dependable production contract or strong nearby market. For crops such as coloured capsicum, English cucumber, tomato or cut flowers, calculate expected grade, harvest window, rejection rate, labour and market distance—not only yield.

Check the structural details, not only the name

Two structures described as “gothic” or “naturally ventilated” can differ greatly in strength and performance. Request a layout, specification sheet and item list before paying an advance.

Use this pre-purchase checklist:

  1. Survey the site. Check slope, drainage, approach road, electricity, borewell or water source, and shade from trees or buildings.
  2. Identify wind and rain risk. Ask for a design appropriate to local wind exposure and rainfall. Do not copy a neighbouring design from a different district.
  3. Check span and gutter layout. Wider spans reduce internal columns but increase structural demand. Multi-span houses need well-designed gutters and downpipes.
  4. Confirm ventilation dimensions. For an NVPH, review side opening height, ridge vent type, insect-net placement and curtain operation.
  5. Review GI material and connections. Check pipe sizes, galvanisation, bracing, base plates, fasteners and foundation details. A visual inspection alone cannot confirm steel thickness.
  6. Plan water discharge. Roof water must move away from the foundation. Standing water around columns shortens service life and creates access problems.
  7. Include crop operations. Leave space for entry, packing movement, fertigation unit, drainage channels and crop rows. Tall crops need sufficient gutter and ridge height.

For a stronger technical comparison, see why span width matters before buying a polyhouse. Also plan an entry arrangement that helps keep pests out; insect netting does not compensate for frequent uncontrolled movement through an open door.

Budget, running cost and subsidy: compare the full requirement

The first cost is only one part of the decision. NVPHs usually have lower routine energy demand, but still require crop monitoring, curtain management, repairs and periodic cover replacement. Fan-and-pad houses require ongoing electricity, water, filter maintenance, pad care, fan servicing and management of controls.

A nethouse may have a lower material requirement than a polyfilm house, but it has different production limits. Avoid treating a nethouse as a cheaper substitute if your crop plan depends on rain protection.

Government assistance can influence the project plan, but it should not decide the structure by itself. Under MIDH/NHM, support is commonly stated as 50% of the cost norm up to 4,000 m² per beneficiary, with about 15% higher norms in hilly and North-Eastern states. For larger NHB commercial projects, subsidy conditions, eligible area and approvals differ; In-Principle Approval is needed before starting work. Norms and state implementation can change, so confirm eligibility, documents, empanelment conditions and current norms with your state horticulture department before ordering material. Read the NVPH subsidy guidance for planning points.

Next steps

First write down your crop, target production months, farm location, water quality, electricity availability and expected buyer. Then compare an NVPH, saw-tooth NVPH, gothic profile and fan-and-pad option against that list—not against a neighbour's structure alone.

Ask for the structural drawing, bill of materials, ventilation plan and warranty terms in writing. Polyhouse Constructions offers complete material kits for NVPH, fan-and-pad polyhouses and flat or curved nethouses, along with individual items. You can build your kit and view this week's rates to check each listed component and quantity before moving ahead with construction through Kryzen Biotech's construction team.

Frequently asked questions

Which type of polyhouse structure is best for beginners in India?

For many first-time growers, a naturally ventilated polyhouse is easier to operate than a fan-and-pad house. It is still important to choose the crop, ventilation layout and site carefully, especially in very hot or humid districts.

Is a gothic polyhouse better than a normal curved polyhouse?

A gothic profile can be useful where quick rainwater runoff and greater central height are valuable. It is not automatically superior; local wind, span, gutter design, steel specification and foundation quality are equally important.

Can a saw-tooth polyhouse be used in heavy rainfall areas?

It can, but the roof vent needs a design that limits rain entry and handles wind safely. Gutters, downpipes, drainage and film fixing should be planned for the local monsoon intensity.

Does a fan-and-pad polyhouse work during the Indian monsoon?

It continues to circulate air, but evaporative cooling becomes less effective when outdoor humidity is high. Crop disease management, dehumidification strategy where applicable, drainage and airflow become especially important in monsoon months.

Should I choose a nethouse or a polyhouse for vegetable farming?

Choose a nethouse for shade, airflow, nursery work or crops that can tolerate rain exposure. Choose a polyfilm-covered structure when your vegetable crop needs rain protection and a more buffered growing environment.

ਆਪਣੀ ਕਿੱਟ ਬਣਾਓ