ਇਹ ਕਿਵੇਂ ਕੰਮ ਕਰਦਾ ਹੈਵੱਖਰੀ ਸਮੱਗਰੀ ਖਰੀਦੋ

How to Manage Thrips in Protected Cultivation

Polyhouse Constructions Agronomy Desk · 12 ਨਵੰ 2026

Thrips control in polyhouse works best when it starts before visible damage becomes widespread. Check crops at least twice a week, use blue sticky traps to spot an increase early, remove heavily infested plant parts, close pest-entry gaps and protect beneficial insects where they are being used.

Do not wait until leaves turn silver or flowers start dropping. Thrips hide in buds, folded leaves and flowers, so a crop can carry a damaging population before it looks badly affected. This is especially important in capsicum, cucumber, tomato, chilli, rose, gerbera and nursery plants.

Know what thrips damage looks like

Thrips are very small, narrow insects. Adults are usually pale yellow to brown or dark in colour, depending on the species. They run quickly when disturbed. Immature stages are even smaller and commonly stay on the underside of tender leaves, inside flowers or around growing points.

Look for these early signs:

  • Fine silvery streaks or patches on young leaves
  • Tiny black dots of excreta beside the silvery feeding marks
  • Curling, distorted or rough new leaves
  • Scarring on buds, petals and young fruit
  • Flower shedding or poor fruit set
  • Bronzing of leaves in a severe attack
  • Uneven colour, scars or russeting on fruit, which reduces market grade

In crops such as capsicum and chilli, inspect flowers closely. Tap a flower over a clean white sheet of paper or a tray. Small moving insects are easier to see against a light background. In cucumber, examine tender terminals and flowers. In ornamentals, check buds and petals, not just leaves.

Thrips feeding can resemble nutrient stress, mite damage or spray scorch. The black specks and live, slender insects are useful clues. For help separating pest damage from nutrition problems, see how to diagnose nutrient deficiency versus pest damage.

Some thrips can transmit plant viruses. Stunting, rings, mosaic, severe curling or necrotic patches may indicate more than feeding damage. Do not keep virus-suspect plants in the structure while waiting to see if they recover.

Scout twice a week and let trap catches guide action

A fixed scouting routine finds a problem when it is still localised. During hot, dry weather, and when nearby field crops are being harvested, increase checks to every two or three days. Thrips pressure may rise sharply in summer and in dry spells after the monsoon.

A simple scouting routine

  1. Divide the structure into sections. In a small unit, check at least 20 plants spread across the entrance, side vents, corners and centre. In larger houses, inspect plants in each block or bed.
  2. Include the first rows near doors and side ventilation. These are common entry zones.
  3. On each selected plant, inspect one young leaf, one mature leaf, the growing point and flowers where present.
  4. Tap a few flowers or terminals onto white paper. Record whether you see adults or immature thrips.
  5. Check sticky traps and write down the date, location and catch trend. A rising count over consecutive checks matters more than one isolated catch.
  6. Mark hotspots with a ribbon or on a crop map. Revisit them first at the next inspection.

Blue sticky traps are commonly used for thrips monitoring. Put them just above the crop canopy and raise them as the crop grows. Place extra traps close to doors, vents and known hotspots, but keep them clear of leaves, irrigation lines and worker movement. They are a monitoring and mass-trapping aid, not a complete cure for an established outbreak. Use this detailed blue sticky trap placement guide to position them properly.

Replace dusty or insect-covered traps. In a dry, dusty nethouse, traps can lose stickiness faster than expected. Record the number of thrips caught per trap per inspection rather than relying on memory.

What you find

What it usually means

Immediate response

Occasional adults on traps, no crop damage

Early arrival or outside pressure

Check entry points, intensify scouting and remove weeds nearby

Increasing trap catches but few insects on plants

Population may be building in a hotspot

Inspect flowers and terminals, add traps at entry zones and review hygiene

Immatures on leaves or flowers plus fresh silvering

Thrips are breeding in the crop

Remove badly affected parts, target hotspots and use a compatible IPM intervention promptly

Widespread flower damage, fruit scarring or virus-like symptoms

Economic loss is under way

Act across the affected block, remove suspect virus plants and get crop-specific advice from an agronomist or KVK

There is no single trap-catch number that suits every crop, season and market. A few thrips may be unacceptable in export-oriented flowers, while a fruiting vegetable crop may tolerate a small early presence. Set an action level with your crop adviser and revise it after each crop cycle.

Stop thrips from entering the structure

Exclusion reduces the number of sprays and other interventions needed later. It is especially valuable in a naturally ventilated polyhouse, where side vents are open for much of the day.

Start with the side insect net. It must cover all ventilation openings without tears, loose overlaps or gaps around columns, drains and curtain ends. The mesh needs to be selected for the target insect and the local ventilation requirement. Very fine nets can improve exclusion but may reduce airflow, so structure design and summer conditions matter. Read how to choose insect-proof net for pest exclusion before replacing a net.

Check these points every week:

  • Side nets are taut and undamaged.
  • Roll-up curtains close fully at the ground and at both ends.
  • Doors shut on their own and do not remain open during harvesting.
  • There are no gaps around pipes, cables, fan frames or foundation edges.
  • Workers do not bring in infested seedlings, flowers or crop waste.
  • Weeds and volunteer plants are removed from the outer perimeter.

A double-door entry or insect-proof porch is useful where thrips pressure is high, especially for nursery units and premium flower crops. Avoid opening large doors for long periods during peak field activity outside.

In fan-and-pad houses, keep screens, doors and service openings intact. Strong airflow does not replace insect exclusion. In nethouses, side and entry protection become even more important because the crop is more exposed to outside pest movement.

Keep the crop and surroundings unfavourable for thrips

Thrips survive on weeds, old crop residue, discarded flowers and volunteer plants. A clean structure interrupts this bridge between crop cycles.

Remove weeds from inside the house, drainage channels, the entrance area and a managed strip around the structure. Do not allow flowering weeds to remain near vents. They can feed and shelter thrips before the insects move to the crop.

During harvest, collect dropped flowers, pruned leaves and heavily scarred fruit in a closed container. Take them out of the production area the same day. Do not leave infested waste in a heap beside the polyhouse. Follow safe disposal practices described in this crop-waste disposal guide.

At the end of a crop, remove all crop residue promptly. Clean benches, walkways, trays, tools and corners where plant debris gathers. A crop-free break can help reduce carry-over, but its value depends on removing weeds and volunteer plants as well.

Start with clean seedlings

Many outbreaks begin with infested nursery material. Before transplanting, inspect every tray batch, particularly new leaves and growing points. Keep newly received seedlings separate for a short observation period where practical. Reject or isolate visibly infested trays instead of spreading them across the production house.

Use the seedling health checklist before plants enter the main crop area. This is also the time to inspect tray surfaces, trolley wheels and packing material that may carry insects.

Make the crop less favourable without stressing it

Healthy growth does not make a crop immune to thrips, but plant stress can worsen the damage and make recovery slow. Maintain uniform irrigation through the drip system. Avoid repeated water stress followed by heavy irrigation, particularly in hot months.

Do not push excess nitrogen in an attempt to recover damaged plants quickly. Very soft, lush growth can attract several sucking pests and creates tender tissue for feeding. Base fertigation on crop stage, water quality, growing medium or soil test results, and observed plant growth.

Ventilation and temperature management also matter. Thrips often build faster in warm, dry conditions. In naturally ventilated houses, operate side curtains according to weather while retaining insect exclusion. In fan-and-pad houses, ensure fans, pads and air circulation are functioning as designed. Avoid stagnant corners and excessively dense canopy growth.

Do not overuse shade simply to manage pests. Shade changes crop growth, flowering and humidity. Use the shade level recommended for your crop and season, then manage thrips through monitoring and IPM rather than by darkening the house.

Use compatible interventions in the right sequence

When scouting confirms breeding thrips in the crop, combine several actions. Relying repeatedly on one chemical group is a common reason for poor control. Thrips can develop resistance quickly, particularly where the same active ingredient or mode of action is used crop after crop.

First contain the hotspot

Remove severely infested leaves, flowers or terminals if this can be done without excessive defoliation. Bag the material immediately and take it out of the house. Place additional blue traps around the affected patch and inspect adjacent rows closely.

For a small, early hotspot, this physical action may prevent the need for a house-wide response. Do not shake infested flowers or leaves over the bed while removing them.

Protect biological control where feasible

Protected cultivation can support biological control, especially when action begins early. Predatory mites, predatory bugs and approved microbial products may be options depending on the crop, temperature, humidity, thrips species and severity of infestation.

Biocontrol needs planning. It may not give an instant knock-down in a severe outbreak. Ask a qualified supplier, crop consultant or KVK about the correct organism, release method, crop compatibility and storage. If beneficial insects are already present, avoid broad-spectrum treatments that can eliminate them and lead to a stronger pest rebound.

See biological control options for polyhouse pests for the decisions to make before starting a biological programme.

If a plant-protection product is needed

Use only products registered and permitted for your crop and situation. Choose interventions with advice from a KVK, qualified agronomist or local horticulture officer. Follow the product label exactly for dose, water volume, re-entry precautions, pre-harvest interval and safety equipment.

Rotate modes of action, not just brand names. Avoid consecutive applications from the same mode-of-action group. Make coverage purposeful: thrips hide in flowers and under leaves, so a hurried spray on top foliage alone will fail. Use clean water, calibrated equipment and enough coverage for the crop canopy, without runoff.

Keep a written record of scouting, trap counts, intervention date, product active ingredient, mode of action, crop stage and outcome. These records reveal whether the programme is working and help meet residue-management requirements. For harvest planning, review pre-harvest pest checks for marketable produce.

Avoid these common thrips-control mistakes

Several practices give temporary relief but do not break the pest cycle:

  • Using traps only: traps detect and catch some adults, but immatures remain protected in the crop.
  • Spraying only after visible silvering: by this stage, breeding is often widespread.
  • Repeating the same chemistry: this increases resistance risk.
  • Ignoring flowers: flowers are a key hiding and breeding site in many crops.
  • Keeping infected or virus-suspect plants: they can remain a source of pests and disease.
  • Leaving weeds near the structure: weeds maintain thrips between crops.
  • Repairing net holes late: a small tear close to a vent can become a regular insect entry route.
  • Bringing in untreated nursery plants: one infested tray can seed multiple beds.

Next steps

Today, walk the structure with a white sheet of paper and inspect flowers, terminals and the first rows near the doors. Replace dirty traps, map any hotspots and repair visible gaps in the insect barrier.

Over the next week, begin a twice-weekly record of trap catches and plant observations. Then set a crop-specific action threshold with your KVK or agronomist before the next period of hot, dry weather. If you are upgrading side protection or replacing damaged material, you can view protected-cultivation materials or build a material kit with current weekly rates.

Frequently asked questions

Are blue sticky traps enough for thrips control in a polyhouse?

No. Blue traps help detect adult thrips and can reduce some flying adults, but they do not control immatures hiding in flowers and leaf folds. Use them with crop scouting, insect exclusion, sanitation and compatible interventions.

Why do thrips keep returning after spraying?

They may be entering through gaps, arriving on seedlings or surviving in flowers, weeds and crop residue. Repeated use of the same mode of action can also lead to reduced sensitivity, so review the full IPM programme with an agronomist.

Can thrips spread virus in protected cultivation?

Some thrips species can transmit important plant viruses. Remove and isolate plants with strong virus-like symptoms promptly, and seek confirmation from a plant-health expert because viruses cannot be cured by insect control alone.

Which crops need the closest thrips monitoring?

Capsicum, chilli, cucumber, tomato, roses, gerbera and nursery crops often need close attention because tender growth and flowers are vulnerable. Actual risk varies by crop, season, local thrips species and nearby vegetation.

How often should sticky traps be changed in a polyhouse?

Replace them when the adhesive surface is dusty, crowded with insects or no longer sticky. In dusty summer conditions this may be sooner than in a clean, humid season; regular inspection is more useful than following one fixed interval.

ਆਪਣੀ ਕਿੱਟ ਬਣਾਓ