ਇਹ ਕਿਵੇਂ ਕੰਮ ਕਰਦਾ ਹੈਵੱਖਰੀ ਸਮੱਗਰੀ ਖਰੀਦੋ

Pole Bean Polyhouse Profit per Acre India: Cost and Return Guide

Polyhouse Constructions Agronomy Desk · 12 ਨਵੰ 2026

Pole bean polyhouse profit per acre in India usually depends less on one high yield figure and more on the number of marketable pickings, the share of straight tender pods, and the price received in each week. A practical planning range is ₹0.5 lakh to ₹5 lakh or more per acre per crop before interest, depreciation and income tax. A weak market or poor pod grade can reduce this sharply.

For a typical 100–140 day pole bean crop, growers should budget separately for the polyhouse and the crop. The figures below are crop operating estimates only. They do not include land rent, polyhouse construction cost, loan interest, depreciation, or the cost of major irrigation equipment already installed. Actual results vary with variety, state, season, labour rate, crop health and selling channel.

Start with a realistic per-acre crop plan

One acre equals about 4,047 m². In a naturally ventilated polyhouse, not all this is planted: central paths, side paths, tanks and work space reduce the productive bed area. A workable plan may have roughly 3,000–3,400 m² under beds.

Pole bean is usually grown on raised beds with drip irrigation and vertical strings or a trellis. It needs a taller, stronger crop-support arrangement than bush French bean. The crop generally starts giving harvestable pods about 45–60 days after sowing, depending on temperature and variety. Picking commonly continues for another 45–70 days.

For profit planning, use these conservative physical ranges:

Planning factor

Working range per acre

Why it changes

Productive bed area

3,000–3,400 m²

Layout, paths and service area

Plant population

9,000–14,000 plants

Variety, spacing and plants retained per spot

Crop duration

100–140 days

Season, variety and crop condition

Picking period

7–12 weeks

Temperature, pruning and nutrient balance

Marketable pod yield

8–16 tonnes

Pod set, disease, picking frequency and grade

Average realised sale price

₹25–₹65/kg

Season, buyer, quality and local supply

A target above these ranges is possible on some farms, but should not be the basis for a loan repayment plan until the grower has proven it across more than one season.

Revenue is driven by grade and repeat harvests

Pole beans do not earn their best return when pods are allowed to become long, thick or fibrous. Buyers generally value tender, uniform, clean and straight pods. Market expectations differ between wholesale mandis, retailers, hotels, processors and organised buyers, so agree on the required pod length, diameter, packing and delivery schedule before planting.

Grade-wise selling matters

At every picking, sort pods promptly. Keep export-quality or premium retail-quality pods separate only if a buyer actually pays a premium. Otherwise, excessive sorting adds labour without adding value. A simple practical split can be:

  • Grade A: tender, uniform pods with good colour and no visible damage.
  • Grade B: slightly uneven but marketable pods; often suitable for local wholesale sale.
  • Reject or low-value lot: over-mature, misshapen, pest-damaged or diseased pods.

The average sale price is not the highest mandi quote. It is the blended rate after grade mix, commission where applicable, packing loss, transport, unsold material and buyer deductions. This is why a crop with 12 tonnes of good pods can outperform a 15-tonne crop with poor uniformity.

Three revenue scenarios

The following examples use marketable yield and average realised farm-gate price. They are planning illustrations, not assured prices.

Scenario

Marketable yield

Average realised price

Gross crop revenue

Cautious

8,000 kg

₹30/kg

₹2.4 lakh

Working target

12,000 kg

₹45/kg

₹5.4 lakh

Strong crop and market

16,000 kg

₹60/kg

₹9.6 lakh

The key lesson is that price changes have a large impact. At a 12-tonne yield, every ₹10/kg change in realised price changes gross revenue by about ₹1.2 lakh per acre. Before sowing, check whether your expected harvest overlaps with a local glut from open-field French bean or other beans.

Estimate the crop operating cost, not just seed and fertiliser

Pole bean is a labour-intensive harvest crop. Many budgets look attractive because they include seed and nutrition but understate picking, grading and transport. The range below suits a one-crop per-acre budget in a polyhouse with drip infrastructure already available.

Cost head

Indicative range per acre per crop

What to include

Seed, nursery or direct sowing inputs

₹20,000–₹50,000

Variety, seed treatment, trays/media if seedlings are raised

Bed preparation and planting

₹25,000–₹55,000

Soil work, labour, mulch where used, basal amendments

Trellis strings, clips and crop support

₹35,000–₹80,000

Strings, hooks/clips, tying and removal labour

Fertigation and crop nutrition

₹45,000–₹90,000

Water-soluble fertilisers, micronutrients and testing

Pest, disease and sanitation inputs

₹25,000–₹70,000

Monitoring, traps, bio-inputs and approved crop-protection inputs

Routine interculture and crop training

₹35,000–₹80,000

Weeding, guiding vines, pruning where needed, irrigation supervision

Picking, sorting, packing and dispatch

₹60,000–₹1.4 lakh

Repeated harvest labour, crates/cartons, local freight

Electricity, repairs and contingency

₹20,000–₹55,000

Pump operation, drip repairs, small replacements and losses

Total crop operating cost

₹2.65–₹6.2 lakh

Excludes structure, land and finance costs

A controlled and well-managed crop often falls around the middle of this range. Costs rise if harvest labour is hired at short notice, pods must be packed in retail units, crop protection problems persist, or market trips are frequent with small quantities.

Use soil and irrigation-water tests to prepare the nutrient programme. Avoid a fixed recipe copied from another district. Excess nitrogen can produce vigorous vines but reduce balanced flowering and make the canopy more humid. For pest and disease management, use sanitation, insect exclusion, sticky traps, scouting and removal of affected plant parts as the first line. Follow product label instructions and take advice from your KVK or crop agronomist for any plant-protection decision.

Calculate profit after accounting for picking labour

Using the revenue and operating-cost ranges, a simple crop-level calculation looks like this:

Crop operating profit = Gross revenue − crop operating cost

Scenario

Gross revenue

Example operating cost

Crop operating profit

Cautious

₹2.4 lakh

₹2.8 lakh

–₹0.4 lakh

Working target

₹5.4 lakh

₹3.8 lakh

₹1.6 lakh

Strong crop and market

₹9.6 lakh

₹5.0 lakh

₹4.6 lakh

This shows why pole bean is not a “set and forget” polyhouse crop. A crop can have good plant growth and still lose money if the harvest coincides with low market prices or if pickings are delayed.

Track labour per kilogram, not only per day

During peak harvest, record the following after every picking:

  1. Total kilograms harvested.
  2. Number of workers and total labour hours.
  3. Grade A, Grade B and rejection kilograms.
  4. Packing and transport expense for that lot.
  5. Buyer-wise realised rate and payment due date.

Divide the picking-and-packing cost by kilograms sold. If labour cost per kg rises steadily, review picking frequency, worker allocation, vine accessibility and grade rejection. Do not reduce picking frequency merely to save labour; over-mature pods can reduce both grade and future flowering.

A morning harvest every 2–3 days is common during active production, with frequency adjusted to temperature and pod growth. Move harvested beans out of direct sun immediately. Quick shade, clean crates and same-day dispatch help protect tenderness and appearance.

Choose the crop window and market before sowing

In much of India, pole bean performs best in relatively mild conditions. High summer heat can impair flower retention and pod quality, while prolonged humidity raises disease risk. The right sowing window differs between Maharashtra, Karnataka, Telangana, north Indian plains, hills and coastal belts.

A naturally ventilated polyhouse can protect the crop from rain and reduce insect entry, but it must still release heat and humidity. Side ventilation, insect net condition, roll-up curtains and drainage matter. Learn the layout and climate limits of an NVPH before selecting a season. In hotter locations or summer production, compare the operating cost and climate control of an NVPH versus fan and pad polyhouse rather than assuming either structure suits every crop window.

Do market work at least four to six weeks before sowing:

  • Speak to two or three potential buyers, not only one trader.
  • Ask what pod size, bunching or loose-pack format they accept.
  • Estimate weekly demand during your likely picking period.
  • Find out whether they collect from the farm or require delivery.
  • Confirm payment timing, crate return and rejection rules.
  • Keep a fallback outlet such as a nearby mandi, retailer or vegetable aggregator.

For comparison, parthenocarpic cucumber crop costs follow a different harvest and market pattern. Pole bean can fit a local fresh-vegetable channel well, but it needs more attention to tender-pod picking and daily grading.

Reduce avoidable losses from crop management

Good economics start with a crop that stays open, healthy and easy to pick. Use a trellis design that permits workers to move along both sides of the bed without breaking vines. Repair loose strings quickly. Waterlogging at the root zone, poor drainage and continuously wet foliage create avoidable disease pressure.

Keep these operational checks on a weekly sheet:

  • Check dripper discharge and pressure uniformity across the house.
  • Scout the underside of leaves and young growing points twice each week.
  • Remove diseased or severely infested plant material from the crop area safely.
  • Record flowering, fruit set and harvest weight bed by bed.
  • Remove over-mature pods at every harvest.
  • Clean crates and keep packed produce off the floor.
  • Review grade percentage and realised price, not just total harvest weight.

Crop rotation also matters. Repeating beans in the same soil can increase root disease and nematode risk. Where possible, rotate with a non-legume crop and use soil testing to guide amendments. If production is in grow bags or another soilless system, monitor water quality, drainage and nutrient balance closely.

Structure cost and subsidy should be kept separate

The figures above do not recover the investment in the protected structure. Add an annual cost for depreciation, repairs, insurance if any, and loan interest when deciding whether the whole enterprise is viable. A single profitable bean crop does not by itself justify a polyhouse; annual crop sequencing and utilisation determine the return on the asset.

For a material-level estimate, use the kit builder with live weekly rates. It lists the selected structure materials, quantities and current rate. Polyhouse Constructions supplies material kits and individual protected-cultivation items; erection is handled by Kryzen Biotech's construction team.

Subsidy can change the investment calculation, but eligibility and norms vary by scheme and state. MIDH/NHM support is stated as 50% of the cost norm up to 4,000 m² per beneficiary, subject to scheme conditions. Confirm the current rules, approved design, application sequence and release process with the state horticulture department before ordering or starting work. See the detailed guide on NVPH subsidy.

Next steps

Prepare a one-page pole bean budget using your own expected yield, weekly price and labour rate. First calculate the break-even sale price: divide total crop operating cost by expected marketable kilograms. Then test the plan at a price ₹10/kg lower than expected.

Visit likely buyers before sowing, select a season that avoids the biggest local supply peak, and arrange enough labour for frequent picking. Finally, compare the crop plan with the structure's annual use, not one harvest alone. That approach gives a more reliable view of pole bean polyhouse profit per acre in India.

Frequently asked questions

How many pole bean crops can be taken in one polyhouse year?

In favourable climates, two short pole bean cycles may fit in a year, but soil health, cleaning time and market windows must be considered. Many growers rotate with another crop rather than taking beans repeatedly in the same beds.

What is the break-even price for pole beans in a polyhouse?

Break-even price equals total crop operating cost divided by marketable yield. For example, a ₹3.6 lakh operating cost and 12,000 kg of marketable pods require a realised price of ₹30/kg before structure, land and finance costs.

Do pole beans need a fan and pad polyhouse?

Not always. Pole beans can be grown in a naturally ventilated polyhouse during suitable mild-weather windows. Fan and pad cooling may be relevant where heat stress is severe, but it adds capital, electricity and maintenance costs.

Why does pole bean yield fall after the first few pickings?

Delayed harvesting, heat stress, imbalanced nutrition, poor pollination conditions, pest damage and disease can all reduce later pod set. Regular tender-pod harvest and close crop monitoring help maintain the production period.

Can pole beans be sold directly to supermarkets or restaurants?

Yes, if you can supply consistent grades, clean packing and reliable volumes on agreed days. Direct sales may improve price realisation, but they also add responsibility for sorting, packaging, delivery and payment follow-up.

ਆਪਣੀ ਕਿੱਟ ਬਣਾਓ