Microgreens Cultivation in Polyhouse India: Practical Production Guide
Polyhouse Constructions Agronomy Desk · 12 ਨਵੰ 2026
Microgreens cultivation in polyhouse India can give frequent harvests in a small area, but crop hygiene and climate control matter more than expensive equipment. Start with two or three easy crops, use food-safe trays and clean growing media, sow weekly, and sell only after confirming demand from nearby restaurants, retailers or direct customers.
Microgreens are young edible seedlings harvested after cotyledons open and, in some crops, when the first true leaf just appears. They are not sprouts. Sprouts are generally eaten whole, including the seed and root, while microgreens are grown in media and cut above the surface. Most microgreens are ready in around 7–21 days, depending on crop and season.
Choose the right protected space and market first
A naturally ventilated polyhouse, a nethouse or a clean covered room can support microgreens. The best choice depends on local temperature, dust, rain entry and the consistency of the buyer market. A microgreens unit does not need large open soil beds. It needs a washable work area, stable shelves or racks, safe water, drainage and protection from insects.
For most growers, a small section of an existing protected farm is a sensible starting point. Separate it from soil-grown crops, compost, packing of muddy produce and chemical storage. This reduces dust and cross-contamination.
In hot Indian summers, particularly in dry interior districts, trays can overheat quickly under direct polyhouse light. In humid monsoon weather, poor airflow can lead to mould and soft stems. A structure with side insect net, adjustable ventilation and appropriate shade is useful. Read the basics of naturally ventilated polyhouses before deciding whether your existing structure suits tray production.
Before sowing, speak to potential buyers. Chefs may want radish, mustard, pea shoots, sunflower and basil types. Premium grocery buyers may prefer colourful mixes in small punnets. Ask each buyer about preferred pack size, delivery days, expected shelf life and whether they want living trays or cut microgreens.
Pick crops, seeds and trays for reliable first batches
Use seed specifically sold or documented for edible microgreen production where possible. Do not use seed treated with chemicals or seed intended only for field sowing when its treatment status is unclear. Keep the seed lot label, supplier record and purchase date. Traceability is important when the crop is eaten raw.
Start with crops that germinate quickly and are easy to recognise at harvest. Avoid mixing many species in one tray initially because they may emerge and mature at different rates.
| Crop | Typical harvest window* | Growing notes | Beginner suitability |
|---|---:|---|---|
| Radish | 6–10 days | Fast, colourful stems, sharp taste | Very good |
| Mustard | 7–12 days | Quick crop; harvest before stems become too long | Good |
| Pea shoots | 10–16 days | Larger seed and deeper tray; can be harvested once or sometimes twice | Very good |
| Sunflower | 8–14 days | Needs careful seed handling and adequate air movement | Moderate |
| Broccoli | 8–14 days | Fine seed; do not keep the medium wet | Good |
| Basil | 16–25 days | Slow and warmth-loving; needs patience | Moderate |
*The timing varies with variety, temperature, light and desired leaf stage.
Avoid tomato, potato, brinjal and other solanaceous crops for microgreens because their young tissues may contain undesirable compounds. Also be cautious with crops known to have food-safety or toxicity concerns in immature form. When trying an unfamiliar species, confirm that it is commonly used as an edible microgreen.
Tray selection
Choose shallow, rigid, food-safe plastic trays that can be washed and sanitised repeatedly. Common tray depths are about 3–5 cm for most crops. Pea shoots and sunflower can benefit from a tray closer to 5 cm deep because of their stronger roots and heavier canopy.
Use trays with drainage holes for the crop. Keep a second, solid tray below it to catch drainage during bottom watering. This simple two-tray system keeps foliage dry and reduces splashing of media on leaves.
Keep tray sizes uniform across a rack. Uniform trays make sowing, watering, stacking and harvest faster. Inspect trays after every crop. Discard cracked trays because scratches and cracks hold organic matter and are hard to sanitise properly.
Select a clean growing medium and prepare it correctly
Microgreens need a clean, low-dust medium that holds enough moisture but still has air spaces. Common options include cocopeat-based blends, peat-based media where available, or other commercially prepared soilless media. A fine, stable medium is usually easier for small-seeded crops such as radish, mustard and broccoli.
Do not use ordinary field soil in trays. It is heavy, drains poorly, introduces weed seeds and can carry pathogens. Avoid raw compost, partially decomposed manure and untested farmyard manure in crops meant to be eaten raw.
Fill each tray evenly to around 2–3 cm for most microgreens. Press the surface very lightly so that the seed has contact with the medium, but do not compact it. A compacted tray stays wet for too long and encourages weak rooting.
Most short microgreen crops obtain their early growth from seed reserves. Plain, clean water and a good growing medium are usually enough for a single short crop. If you use soluble nutrients for longer crops or repeat-cut shoots, first test on a few trays and maintain water quality records. Avoid unnecessary nutrient application because it adds cost and can leave a wet, soft crop if watering is also excessive.
Basic pre-sowing preparation
- Wash hands and clean the sowing table before opening seed packets.
- Wash used trays to remove all roots and media. Then sanitise them using a food-safe method suitable for your operation, and allow them to dry.
- Moisten the growing medium before filling trays. It should feel evenly damp, not dripping when squeezed.
- Label every tray with crop, variety or seed lot, sowing date and expected harvest date.
- Keep a simple batch register. It helps trace a quality complaint back to a seed lot, tray and harvest day.
Sow, germinate and manage light
Spread seed evenly across the tray. Dense sowing is normal for microgreens, but overcrowding reduces airflow and increases disease risk. The correct sowing rate differs sharply by crop, seed size and tray area, so establish it through small trials with your own tray size. Weigh seed per tray during each trial instead of estimating by hand.
After sowing, press large seeds gently into the surface. Fine seeds generally need only firm contact with the moist medium. Cover lightly only if the crop needs it. Excessive covering makes stems dirty and can delay emergence.
Many growers stack sown trays or place a clean, weighted empty tray above them for the first few days. This encourages uniform emergence for crops such as radish, broccoli and sunflower. Check the trays daily. As soon as shoots begin to push upward, move them into light. Leaving emerging seedlings in darkness too long produces pale, stretched stems.
Light and temperature targets
Microgreens need bright, even light after germination. In a polyhouse, indirect daylight is often enough when trays are kept under a suitable shade level. Strong direct sun can scorch leaves and heat the root zone, especially from March to June in much of India.
Aim for moderate temperatures, commonly around 18–28°C for many standard crops. Crop response varies: radish and broccoli generally remain more compact in cooler conditions, while basil needs warmer conditions. When daytime temperatures rise beyond this range, improve ventilation, use suitable shade and avoid placing racks against hot south- or west-facing walls.
A 50% shade arrangement may be useful in intense summer light, but inspect crop colour and stem length. Too much shade creates elongated stems and slower growth. White reflective shade material can provide more diffuse light than darker shade in some setups. See the available white 50% shade net options if your tray zone needs seasonal light reduction.
If using artificial lights, keep them above the canopy at a manufacturer-recommended distance and use a timer. A consistent daily photoperiod of roughly 12–16 hours is often used for indoor production. Avoid running lights continuously; plants need a dark period as well.
Water without creating mould or weak stems
Water management is the main daily skill in microgreens cultivation in polyhouse India. A tray can change from correctly moist to too wet in a few hours during cloudy monsoon weather, while it may dry rapidly in May heat.
For the first day or two, a very gentle top mist may help settle seed and medium. Once seedlings have rooted, shift mainly to bottom watering. Pour clean water into the solid lower tray, allow the crop tray to absorb it for a short period, then remove excess standing water. Do not leave trays permanently sitting in water.
Check trays at least morning and afternoon in hot weather. Lift a tray to judge its weight and touch the medium rather than watering by a fixed clock. Water when the upper layer is beginning to lose moisture but before seedlings wilt.
Use potable-quality water where possible. Store water in covered, clean tanks. If your borewell water has high salinity, unusual odour or visible sediment, test it before expanding production. Water quality affects germination, flavour, shelf life and nutrient management.
Maintain clear drainage below racks. Wet floors, algae, discarded roots and stagnant water attract insects and raise contamination risk. Good air movement is just as important as watering: plants should dry quickly if accidental moisture reaches their leaves.
Prevent contamination, pests and disease through hygiene
Microgreens are often sold for raw consumption. Treat hygiene as a production system, not as a final wash before packing. A final wash cannot reliably correct contamination introduced through seed, water, trays or handling.
Create separate zones for seed storage, sowing, growing, harvest and packing. Keep footwear for the production area separate from footwear used in field areas. Restrict visitors and do not allow pets, birds or rodents near racks and packing tables.
Daily hygiene checklist
- Wash hands before sowing, harvesting and packing; use clean gloves where your handling system requires them.
- Remove trays with poor germination, foul smell, slime or visible mould immediately. Do not try to sell around an affected patch.
- Remove plant debris from floors and drains every day.
- Inspect insect net, doors and vents for gaps. Use sticky monitoring cards away from the crop canopy if needed.
- Clean scissors or harvest knives between batches and whenever they touch the floor or a suspect tray.
- Keep harvested produce chilled as soon as practical, especially during hot-weather transport.
- Record sowing, harvest, rejected trays, cleaning and customer dispatches.
Do not apply routine pesticides to a crop harvested within days unless a qualified agronomist specifically advises a legally registered, label-approved use with the correct waiting period. First use exclusion, sanitation, airflow and removal of affected trays. For recurring pest or disease issues, consult your KVK or protected-cultivation agronomist and follow label instructions.
Harvest, pack and plan weekly production
Harvest when cotyledons are fully open and before leaves become coarse or yellow. Crop maturity should match buyer preference. Radish may be harvested for bright stems and two open cotyledons, while pea shoots are often cut when tendrils are just developing.
Harvest in the coolest, cleanest part of the day. Use sanitised sharp scissors or knives and cut just above the medium surface. Avoid pulling plants from the tray because this brings media and roots into the pack.
Inspect harvested microgreens carefully. Remove seed hulls, yellow leaves and any damaged material. Dry foliage is essential before packing. If washing is necessary for your market, use safe water, handle gently and remove surface moisture completely before packing. However, many growers prefer a clean growing and harvesting system that avoids the need for a post-harvest wash.
Use clean, food-grade ventilated punnets, clamshells or bags suited to the crop and delivery route. Pack lightly; compressed leaves heat up and deteriorate quickly. Move packed material to refrigeration promptly. Shelf life varies by crop, packing method and cold chain, so conduct your own holding test before making claims to customers.
Simple weekly crop planning method
- List confirmed weekly orders by crop and pack size.
- Add a small trial buffer only after your germination and yield are consistent.
- Divide the required quantity across two or more sowing days each week. This reduces the risk of one failed batch.
- Reserve one rack area for germination and another for light-grown trays.
- Keep one or two empty rack levels for cleaning, crop delays and rejected trays.
- Review actual yield, rejection and sell-through every week before increasing sowing.
A small, dependable production calendar is better than filling every rack before market demand is stable. Once sales are regular, rack density, insulated packing and cooling may become more important investments than increasing the protected area.
Structure and workflow considerations for expansion
For a larger microgreens unit, design the workflow before buying more racks. Workers should move in one direction: clean tray storage, media filling, sowing, germination, growing, harvest, packing and cold storage. Avoid carrying harvested packs back through the sowing area.
Naturally ventilated structures can work well in moderate weather. In very hot regions or during peak summer, evaporative cooling or a cooled room may be needed to protect crop quality and packing temperature. Compare the operating requirements in NVPH versus fan-and-pad polyhouse before selecting a structure for a year-round unit.
For a polyhouse microgreens zone, use durable covered surfaces, insect exclusion and ventilation that can be adjusted with season. Polyhouse Constructions supplies material kits and individual items for protected structures; you can build a kit and check this week’s rates based on the required covered area and components.
Next steps
Start with 20–40 trays of two easy crops such as radish and pea shoots. Run three sowing cycles in your actual protected environment, recording germination, days to harvest, yield, rejected trays and customer feedback.
Then standardise one tray size, one media method and a weekly harvest day before adding more crop types. If you are adapting an existing protected structure, check airflow, insect entry, drainage, washable work surfaces and access to clean water first. A disciplined small unit gives better learning than a large unit with inconsistent hygiene and no confirmed sales channel.
Frequently asked questions
Can microgreens be grown in a nethouse instead of a polyhouse?
Yes, in favourable weather a clean nethouse can be used, especially for shade-tolerant crops. However, rain splash, dust, insects, temperature swings and high monsoon humidity may be harder to manage than in a more enclosed polyhouse area.
Do microgreens need fertiliser during their short crop cycle?
Most common microgreens can complete a single short harvest using nutrients stored in the seed, provided the growing medium and water are suitable. Longer-duration crops and repeat-cut shoots may need a different approach, so test on a small batch before adopting any nutrient programme.
How many days do microgreens take to grow in India?
Fast crops such as radish may be ready in about 6–10 days, while pea shoots often take 10–16 days and basil can take more than two weeks. Winter temperatures, cloudy weather and low light can extend the crop duration.
Why is white mould appearing on my microgreen trays?
White growth may be harmless root hairs in some crops, but fuzzy growth spreading across the medium or plants can indicate mould. Reduce excess moisture and crowding, improve airflow, remove affected trays, and review tray cleaning, water quality and seed handling.
Can I reuse cocopeat after harvesting microgreens?
It is better not to reuse the same medium for another raw-eaten microgreen crop because roots, seed debris and microorganisms remain in it. Spent medium can be composted or used appropriately outside the microgreens production system after assessing local farm hygiene needs.
