Aluminium Shade Net for Polyhouse: Uses, Limits and Installation
Polyhouse Constructions Agronomy Desk · 13 ਨਵੰ 2026
Aluminium shade net for polyhouse is useful when high solar radiation is heating the crop zone, especially during the hot, bright months. Its reflective surface sends back part of the sunlight and heat load. However, it is not a replacement for proper ventilation, sufficient roof height, irrigation or cooling design. Use it as a seasonal or movable shade screen, not as a permanent answer to every summer problem.
What is aluminium shade net and how does it work?
Aluminium shade net is a knitted shade fabric with a reflective, aluminised surface. It is commonly called Aluminet in protected cultivation. Unlike dark shade nets, which absorb a significant share of solar energy, a reflective net reflects part of the incoming radiation.
In a polyhouse, this can reduce the radiation reaching leaves, beds, grow bags and floor surfaces. When these surfaces absorb less energy, the crop canopy and root zone may face less heat stress. The effect is usually most useful around noon on clear, hot days.
A reflective net does not create cold air. The actual temperature reduction depends on several factors:
- Outside temperature and solar intensity
- Polyhouse orientation and roof area
- Roof height and ridge ventilation
- Side-curtain opening and insect-net resistance
- Whether the screen is inside or outside the polyfilm
- Crop density, irrigation and humidity
- Wind conditions and season
This is why a grower should judge it by crop response and inside climate readings, not only by how bright the net looks.
Where reflective shading is most useful in Indian polyhouses
Aluminium shade net is mainly a heat-management tool for high-radiation locations and sensitive crop stages. It can be considered in naturally ventilated polyhouses (NVPH) as well as fan-and-pad structures, but its role differs in each.
Suitable situations
It is often useful in these conditions:
- Peak summer in hot, dry regions: The screen can reduce direct radiation on capsicum, cucumber, nursery plants, leafy greens and flowers.
- Hot spells in March to June: In much of peninsular and central India, high light combined with hot dry winds can stress crops before the monsoon arrives.
- Young transplants and newly planted crops: A temporary screen can help plants establish before they face full radiation.
- Nursery and hardening areas: Tender seedlings generally need more careful light management than mature field-ready plants.
- Flower and fruit quality protection: Where direct sun contributes to sunscald, leaf scorching or flower drop, lower radiation can help. Crop response varies by variety and management.
- Fan-and-pad polyhouses with strong sunlight: The cooling system lowers air temperature, while a screen can reduce the solar heat load that the system must handle.
For a basic comparison of naturally ventilated and mechanically cooled structures, see NVPH vs fan and pad.
When it may be unnecessary
Do not assume every polyhouse needs a reflective screen. It may add little value where temperatures are moderate, the monsoon has reduced solar radiation, or the crop is already receiving insufficient light. In cloudy conditions, permanent shade can slow growth and delay harvest.
It is also not the first correction for a badly ventilated structure. Check the ridge vent, side ventilation, curtain operation and roof profile first. A well-designed ridge vent in an NVPH removes hot air more effectively than adding extra shade to a poorly ventilated house.
Aluminium net compared with common shade-net options
The right choice depends on whether the main problem is heat load, direct light, diffused light or low-cost nursery shading. Shade percentage alone does not describe all these differences.
Net type | How it handles sunlight | Main use in protected cultivation | Main limitation |
|---|---|---|---|
Aluminium reflective net | Reflects part of radiation and transmits filtered light | Seasonal reduction of solar heat load in hot, sunny conditions | Can reduce useful light if used too long or at excessive shade level |
White shade net | Scatters and reduces light relatively evenly | General nursery shading and moderate light reduction | Usually reflects less radiant heat than aluminium net |
Green shade net | Reduces light with a green-tinted appearance | Low-cost general shading | Light quality and crop response can be less suitable for some crops |
Black shade net | Absorbs a larger share of sunlight | Strong shade where heat build-up is not the main concern | Absorbed heat can make the net surface hot; may darken the crop excessively |
Reflective shading is therefore different from simply using a darker net. A crop needs enough photosynthetically useful light for growth. If shade is too dense, plants may become soft, internodes may stretch, flowering can reduce and fruit development may slow.
Before choosing a percentage, read how to choose shade-net percentage. The correct range varies with crop, season, elevation, roof covering and whether the screen is fixed or retractable.
Inside or outside the polyhouse: placement matters
The same aluminium net can perform differently depending on where it is fitted. This decision should be made during design or before the hottest season, since access and support arrangement matter.
Internal installation below the roof film
An internal screen is fixed below the polyfilm, usually along the crop-zone roof area. It stays protected from rain, wind and dust compared with an outside screen. It is generally easier to retract or remove seasonally when supported by wires, ropes or a purpose-designed screen system.
However, sunlight has already passed through the polyfilm before reaching the net. The screen can still cut the radiation reaching the crop, but it does not prevent all heat gain at the outer cover. Also, leave a gap between the roof film and screen. A tightly packed layer can restrict rising hot air and interfere with natural ventilation.
External installation above the roof film
An external screen intercepts solar radiation before it reaches the polyfilm. In principle, this can be more effective at reducing roof heat gain. But it faces wind uplift, monsoon rain, dust, sagging and abrasion against the structure.
External installation needs strong, properly tensioned support and must not block gutters, roof drainage, vents or maintenance access. It is generally a specialised seasonal arrangement, not a loose net thrown over the roof.
Practical choice
For many farms, a movable internal screen is the more manageable option. For a site with severe dry-season radiation and an engineered support system, external shading may be evaluated. In either case, avoid covering ridge vents and do not compromise rainwater flow.
Installation points that prevent common failures
A reflective net should be installed as a screen system, not treated like a loose cover. Poor fitting can create wind damage, shade patches and maintenance problems.
Use this checklist before installation:
- Measure the active crop area. Do not automatically cover passages, entry areas or non-crop zones if they do not require shade.
- Choose fixed or movable operation. A retractable or removable screen gives flexibility between summer, monsoon and winter. Fixed shade is suitable only where the crop and local climate need it for a long period.
- Keep clearance from polyfilm. Leave an air space so the net does not rub against the film or obstruct the upward movement of hot air.
- Provide uniform support. Use correctly spaced support wires or members so the net does not sag onto plants, irrigation lines or crop trellises.
- Tension gently and evenly. Over-tensioning can damage knitted fabric and fittings. Loose netting flaps, wears quickly and creates uneven shade.
- Protect vents, gutters and curtains. The screen must not prevent side curtains from opening, obstruct ridge vents or channel monsoon water into unwanted areas.
- Plan access for cleaning and removal. Dust reduces reflectivity. The screen should be reachable without walking on the polyfilm or damaging the roof.
- Inspect after strong winds. Check clips, ropes, support wires and net edges. Repair a small tear before it spreads.
When buying material, check the width, shade specification, UV-stabilisation details and expected application. Product terms can differ between suppliers, so compare technical data rather than relying only on the name “aluminium net”. You can review an aluminium shade net alongside other individual protected-cultivation materials.
Limits: what aluminium shade net cannot solve
Reflective shading is helpful, but it has clear limits. Knowing them prevents poor crop decisions.
It cannot replace ventilation
In an NVPH, hot air must escape through roof and side openings. If side insect net is too restrictive, curtains remain closed, or the ridge opening is inadequate, temperature and humidity problems can continue under the shade screen. Review side-curtain design for better ventilation before treating shade as the main remedy.
It cannot correct weak irrigation management
On hot days, crop water demand changes quickly. A screen may reduce stress, but irregular irrigation, high EC around roots, blocked drippers or poor drainage can still cause wilting and blossom issues. Monitor media moisture, drain where applicable, and irrigation timing.
It can reduce production if overused
Less radiation means less energy available for photosynthesis. This is especially important for fruiting vegetables during low-light monsoon weeks and winter in cooler areas. If plants become overly vegetative, flowering declines or harvest is delayed, review the duration and density of shading.
It can increase humidity-related risk
When shade lowers leaf and air temperatures, relative humidity may rise if ventilation is inadequate. Dense crop canopies and wet foliage make the issue worse. Manage spacing, pruning, irrigation timing and air movement. For disease diagnosis and plant-protection decisions, follow label instructions and consult your KVK or qualified agronomist.
It does not exclude insects
Aluminium shade net is not a substitute for side insect net. Crop protection needs the correct mesh and well-sealed openings at vents, doors and side curtains. The two materials serve different purposes.
Operating the screen through the season
A simple operating plan is better than installing a net and forgetting it. Begin with observation during hot hours, then adjust according to crop condition and measured inside climate.
- Summer: Deploy during the period of strongest radiation if the crop shows heat stress or the climate data supports it. Keep ventilation fully functional.
- Early monsoon: Reassess often. Bright days can still be hot, but continuous cloudy weather may make shade unnecessary.
- Peak monsoon: Avoid unnecessary permanent shading. Low light, high humidity and slow drying are common concerns.
- Winter and cool periods: Retract or remove the screen unless the crop has a specific shading need. Most crops benefit from available light in these months.
Keep a weekly record of outside and inside temperature, relative humidity, leaf condition, flowering, fruit set and harvest quality. Comparing shaded and unshaded sections, where practical, gives more useful information than judging one afternoon.
Next steps
First identify whether your main issue is solar radiation, poor air exchange, crop water stress or a combination of these. Then choose the shade level and screen placement for your crop and season rather than fitting a permanent net by default.
For a new structure, plan the shade-screen support, vent access and curtain movement before erection. Polyhouse Constructions lists material quantities and current weekly rates when you build a kit online. For crop-specific screen operation, validate the plan with your local KVK or protected-cultivation agronomist.
Frequently asked questions
Does aluminium shade net reduce polyhouse temperature?
It can reduce the solar heat load reaching the crop and may lower canopy and inside temperatures during bright, hot hours. The actual result depends strongly on ventilation, roof height, outside weather and whether the screen is internal or external.
Can aluminium shade net be used under polyfilm?
Yes, it is commonly used as an internal roof screen below the polyfilm. Keep an air gap from the film and ensure that ridge vents, side curtains and crop operations are not obstructed.
Is aluminium shade net better than white shade net?
It is often better where reflecting radiant heat is the main need. White shade net can still be suitable for general, even shading, especially in nurseries; the choice should follow crop light requirement and local climate.
Should aluminium shade net stay on during the monsoon?
Usually it should be reviewed frequently rather than left permanently deployed. Monsoon cloud cover already reduces light, and extra shade can reduce growth while humidity remains high.
Can aluminium shade net replace insect net in a polyhouse?
No. Reflective shade net manages radiation, while insect net is selected by mesh size to reduce pest entry. Use properly sealed insect-net openings separately where crop protection requires them.
