Subsidy guide · Peddapalli district, Telangana
NHB Subsidy Eligible Protected Cultivation Project in Ramagundam
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
A subsidy-ready protected cultivation project in Ramagundam needs three things: the right scheme for its size, a structure the scheme recognises, and paperwork that matches. Here is how the National Horticulture Board (NHB) and the Mission for Integrated Development of Horticulture (MIDH) apply in Telangana, and what a 3,952 m² project would look like.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

Two subsidy routes for Ramagundam growers
Both schemes pay 50%; the difference is size and paperwork. Small and medium projects usually go through MIDH (run in Telangana by the state horticulture mission), and larger commercial projects through the National Horticulture Board.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the Peddapalli district horticulture office | NHB online portal (In-Principle Approval) and your bank |
Worked example: a 3,952 m² project in Ramagundam
Take a fan and pad polyhouse of 3,952 m² in Ramagundam, growing high-value vegetables. At that size it can go to NHB as a commercial project, or to MIDH since it is under 4,000 m². The most it can receive at NHB's general norms:
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Assistance is usually 50% of your actual eligible cost or of the cost norm, whichever is lower, so put every eligible cost in the project report: material, freight, erection, drip and planting material. Our material alone comes to ₹822 per m² this week against a structure norm of ₹1,400; freight and erection come on top.
Mandi price seasons around Ramagundam
Across 12 mandis in nearby districts (Adilabad, Karimnagar, Hanumakonda, Hanmakonda), 8 polyhouse and nethouse crops trade regularly. Brinjal has the most arrivals; Cabbage has the widest price swing (346%), peaking in October.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Brinjal | 15 | ₹2,580/q | Sep · ₹4,063 | Mar · ₹945 | 330% |
| Okra (bhindi) | 14 | ₹2,687/q | Jun · ₹3,932 | Apr · ₹1,647 | 139% |
| Green chilli | 15 | ₹3,675/q | Oct · ₹5,341 | Mar · ₹1,468 | 264% |
| Tomato | 18 | ₹2,235/q | Jun · ₹3,484 | Mar · ₹1,137 | 206% |
| Cabbage | 16 | ₹2,005/q | Oct · ₹3,235 | Mar · ₹725 | 346% |
| Bitter gourd | 12 | ₹2,888/q | Jun · ₹3,970 | Apr · ₹2,006 | 98% |
| Ridge gourd | 9 | ₹3,237/q | Jun · ₹3,860 | Apr · ₹2,334 | 65% |
| Beans | 10 | ₹3,331/q | Sep · ₹4,306 | Apr · ₹2,465 | 75% |
Timing your crop for the Ramagundam market
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, brinjal peaks in September; at about 60 days to first harvest, transplant in July.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Brinjal | Sep, Oct | ~60 | July | Mar |
| Okra (bhindi) | Jun, Oct | ~45 | April | Apr |
| Green chilli | Jul, Oct | ~75 | July | Mar |
| Tomato | Jun | ~75 | March | Mar |
| Cabbage | Jul, Oct, Nov | ~75 | July | Mar |
| Bitter gourd | Jun | ~55 | April | Apr |
| Ridge gourd | Jan, May, Jun | ~50 | April | Apr |
| Beans | Feb, Sep, Oct | ~50 | July | Apr |
Ramagundam month by month
May is the hottest month, with afternoons around 43.2°C; December nights drop to about 13.9°C. July is the wettest (276 mm of 1,010 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 30.6°C | 14.1°C | 46% | 12 mm | 4.7 | 1.6 |
| Feb | 34.5°C | 17.5°C | 37% | 7 mm | 5.6 | 1.8 |
| Mar | 38.6°C | 22°C | 32% | 19 mm | 6.2 | 1.8 |
| Apr | 42°C | 26.4°C | 30% | 15 mm | 6.7 | 2.1 |
| May | 43.2°C | 29.3°C | 31% | 21 mm | 6.8 | 2.9 |
| Jun | 36.1°C | 26.5°C | 60% | 146 mm | 5.3 | 3.2 |
| Jul | 31.2°C | 23.9°C | 79% | 276 mm | 4.3 | 3.1 |
| Aug | 29.8°C | 23.3°C | 85% | 258 mm | 4.3 | 2.6 |
| Sep | 30°C | 23°C | 85% | 170 mm | 4.9 | 1.9 |
| Oct | 30.2°C | 20.3°C | 78% | 73 mm | 5.1 | 1.6 |
| Nov | 29.8°C | 16.5°C | 68% | 11 mm | 4.9 | 1.5 |
| Dec | 29.5°C | 13.9°C | 56% | 2 mm | 4.6 | 1.4 |
Which subsidised structure to build in Ramagundam
All four structures we supply are covered by the schemes. What matters for the project's success is the fit with Ramagundam's weather.

Naturally ventilated polyhouse
Best fitFilm roof keeps July–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Ramagundam.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 31°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to January, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Planting material norms and crops that suit
NHB also counts planting material and cultivation in the project cost, at these norms. The right column shows which groups suit this climate.
| Crop group | NHB norm | Suits Ramagundam? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Steps to apply
- 1
Pick the structure and size
Match it to Ramagundam's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
A supplier quotation listing every item with its HSN code, and for an NHB project a DPR covering cost, the high-value vegetables crop plan and repayment.
- 3
Apply before you build
MIDH: apply at the Peddapalli district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Use materials that meet BIS standards and keep the test certificates; the inspection checks structure and specification.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Documents you will usually need
- Land records in your name (in Telangana: Pahani and pattadar passbook), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase
What we provide for your file:

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Material for your Ramagundam project
We supply the complete material for subsidy projects in Telangana from our Satara factory, about 760 km from Ramagundam. See the kit and live price for your structure:
Ramagundam within Telangana
Ramagundam is one of the hotter towns in Telangana (10th of 40 we cover), and among the wettest (10th for rain). These are the larger towns we supply elsewhere in Telangana.
- Subsidy project in Hyderabad
- Subsidy project in Warangal
- Subsidy project in Nizamabad
- Subsidy project in Karimnagar
- Subsidy project in Secunderabad
- Subsidy project in Khammam
- Subsidy project in Mahbubnagar
- Subsidy project in Adilabad
- Subsidy project in Suryapet
- Subsidy project in Miryalaguda
- Subsidy project in Jagtial
- Subsidy project in Mancherial
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a polyhouse in Ramagundam eligible for NHB subsidy?
Yes, if the project is above 2,500 m² and set up as a commercial project with a bank loan. NHB gives a credit-linked, back-ended subsidy of 50% of project cost at its norms. Smaller projects can apply under MIDH through the Peddapalli district horticulture office.
How much subsidy can I get on 1 acre in Ramagundam?
For a 3,952 m² fan and pad polyhouse with high-value vegetables, up to about ₹30.43 lakh at NHB's general norms (50% of ₹60,86,080). The sanctioned figure depends on the approved project.
Do you help with the subsidy file?
We provide the itemised quotation, specifications and test certificates the file needs. The application itself is made by you to the department or NHB.
Is the subsidy paid on my bill or on the cost norm?
Usually on whichever is lower: your actual eligible cost or the admissible cost norm. Include every eligible cost (material, freight, erection, irrigation, planting material) in the project report.
Can I build first and apply later?
No. NHB requires In-Principle Approval before work starts, and MIDH applications are approved before the structure is built. Apply first.
Are hilly-area norms used in Telangana?
Not generally; Telangana uses general-area norms.
Subsidy projects near Ramagundam
The same guide for nearby towns, with the structure that suits each.
| Town | From Ramagundam | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Mancherial | ~10 km | Mancherial | General | NVPH or fan & pad |
| Subsidy project in Mandamarri | ~20 km | Adilabad | General | NVPH or fan & pad |
| Subsidy project in Bellampalle | ~40 km | Mancherial | General | NVPH or fan & pad |
| Subsidy project in Jagtial | ~70 km | Karimnagar | General | NVPH or fan & pad |
| Subsidy project in Karimnagar | ~70 km | Karimnagar | General | NVPH or fan & pad |
| Subsidy project in Kagaznagar | ~80 km | Adilabad | General | NVPH or fan & pad |
