Subsidy guide · Kandhamal district, Odisha
NHB Subsidy Eligible Protected Cultivation Project in Phulabani
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Polyhouses and nethouses in Phulabani can get 50% government assistance, but which scheme applies depends on the size of your project, and the amount depends on the government cost norm, not your bill. This page walks through both routes for a project in Phulabani (Kandhamal district), with a worked example for the structure that suits Phulabani's climate.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

NHB or MIDH: which scheme fits a project in Phulabani
For a project in Phulabani the first question is size. Up to 4,000 m², the MIDH route through the Odisha horticulture department is usually simpler. Above 2,500 m², an NHB project with a bank loan becomes possible.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the Kandhamal district horticulture office | NHB online portal (In-Principle Approval) and your bank |
Worked example: a 3,952 m² project in Phulabani
Take a fan and pad polyhouse of 3,952 m² in Phulabani, growing high-value vegetables. At that size it can go to NHB as a commercial project, or to MIDH since it is under 4,000 m². The most it can receive at NHB's general norms:
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Assistance is usually 50% of your actual eligible cost or of the cost norm, whichever is lower, so put every eligible cost in the project report: material, freight, erection, drip and planting material. Our material alone comes to ₹822 per m² this week against a structure norm of ₹1,400; freight and erection come on top.
Local market prices for polyhouse crops near Phulabani
We averaged two years of daily Agmarknet prices from 3 markets in Kandhamal district for crops that are grown under cover. Cabbage swings the most: about ₹3,317 per quintal in October against ₹1,300 in March, a 155% difference. Brinjal is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Cauliflower | 3 | ₹2,827/q | Oct · ₹3,750 | Feb · ₹1,906 | 97% |
| Cabbage | 3 | ₹2,161/q | Oct · ₹3,317 | Mar · ₹1,300 | 155% |
| Brinjal | 2 | ₹2,392/q | Oct · ₹3,515 | Jul · ₹1,829 | 92% |
| Beans | 2 | ₹5,662/q | Jul · ₹8,000 | Feb · ₹3,476 | 130% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cauliflower peaks in October; at about 75 days to first harvest, transplant in July.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Cauliflower | Sep, Oct, Nov | ~75 | July | Feb |
| Cabbage | Oct | ~75 | July | Mar |
| Brinjal | Sep, Oct | ~60 | August | Jul |
| Beans | Jul | ~50 | May | Feb |
Twelve months of weather in Phulabani
May is the hottest month, with afternoons around 40.1°C; January nights drop to about 11.7°C. July is the wettest (354 mm of 1,494 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 25.9°C | 11.7°C | 57% | 10 mm | 4.4 | 1.3 |
| Feb | 30.8°C | 14.9°C | 47% | 16 mm | 5.3 | 1.5 |
| Mar | 35.9°C | 19.8°C | 40% | 21 mm | 5.8 | 1.7 |
| Apr | 40°C | 24°C | 37% | 33 mm | 6.4 | 2.1 |
| May | 40.1°C | 26°C | 45% | 75 mm | 6.4 | 2.4 |
| Jun | 33.6°C | 25.2°C | 69% | 211 mm | 4.9 | 2.7 |
| Jul | 29.4°C | 23.4°C | 86% | 354 mm | 3.9 | 2.7 |
| Aug | 28.6°C | 23.1°C | 89% | 352 mm | 3.9 | 2.4 |
| Sep | 28.5°C | 22.7°C | 89% | 265 mm | 4.4 | 1.9 |
| Oct | 27.7°C | 20.1°C | 84% | 129 mm | 4.7 | 1.4 |
| Nov | 25.4°C | 15.5°C | 78% | 17 mm | 4.4 | 1.2 |
| Dec | 23.9°C | 12°C | 70% | 11 mm | 4.1 | 1.1 |
Steps to apply
- 1
Pick the structure and size
Match it to Phulabani's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
An itemised supplier quotation with HSN codes, and for NHB a detailed project report (DPR) with costs, crop plan and cash flow.
- 3
Apply before you build
MIDH: apply at the Kandhamal district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Build with BIS-standard material and keep every test certificate and invoice: inspectors check the structure against the approved design.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Eligible structures and how they suit Phulabani
All four structures we supply are covered by the schemes. What matters for the project's success is the fit with Phulabani's weather.

Naturally ventilated polyhouse
Best fitFilm roof keeps July–November rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Phulabani.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 40°C afternoon down to about 32°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from January to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Rain passes through, so pick crops that tolerate it.
Planting material norms and crops that suit
NHB also counts planting material and cultivation in the project cost, at these norms. The right column shows which groups suit this climate.
| Crop group | NHB norm | Suits Phulabani? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Documents you will usually need
- Land records in your name (in Odisha: ROR (Khatian)), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase
What we provide for your file:

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Material for your Phulabani project
We supply the complete material for subsidy projects in Odisha from our Satara factory, about 1,450 km from Phulabani. See the kit and live price for your structure:
Phulabani within Odisha
Among the 33 towns we supply in Odisha, Phulabani ranks 18th for summer heat and 20th for yearly rain. Other Odisha towns on our list:
- Subsidy project in Nabarangapur
- Subsidy project in Bhubaneswar
- Subsidy project in Cuttack
- Subsidy project in Brahmapur
- Subsidy project in Rourkela
- Subsidy project in Puri
- Subsidy project in Sambalpur
- Subsidy project in Baleshwar Town
- Subsidy project in Bhadrak
- Subsidy project in Baripada Town
- Subsidy project in Balangir
- Subsidy project in Jharsuguda
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a polyhouse in Phulabani eligible for NHB subsidy?
Yes, if the project is above 2,500 m² and set up as a commercial project with a bank loan. NHB gives a credit-linked, back-ended subsidy of 50% of project cost at its norms. Smaller projects can apply under MIDH through the Kandhamal district horticulture office.
How much subsidy can I get on 1 acre in Phulabani?
For a 3,952 m² fan and pad polyhouse with high-value vegetables, up to about ₹30.43 lakh at NHB's general norms (50% of ₹60,86,080). The sanctioned figure depends on the approved project.
Can I build first and apply later?
No. NHB requires In-Principle Approval before work starts, and MIDH applications are approved before the structure is built. Apply first.
Are hilly-area norms used in Odisha?
Not generally; Odisha uses general-area norms.
Does the material need to be ISI-marked?
The schemes expect structures that conform to technical standards. Our GI pipes carry the ISI mark and every order ships with lab test certificates.
Do you help with the subsidy file?
We provide the itemised quotation, specifications and test certificates the file needs. The application itself is made by you to the department or NHB.
Subsidy projects near Phulabani
The same guide for nearby towns, with the structure that suits each.
| Town | From Phulabani | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Balangir | ~110 km | Balangir | General | NVPH or fan & pad |
| Subsidy project in Bargarh | ~150 km | Bargarh | General | NVPH or fan & pad |
| Subsidy project in Sambalpur | ~150 km | Sambalpur | General | NVPH or fan & pad |
| Subsidy project in Talcher | ~150 km | Angul | General | NVPH or fan & pad |
| Subsidy project in Titlagarh | ~150 km | — | General | NVPH or fan & pad |
| Subsidy project in Bhawanipatna | ~170 km | Kalahandi | General | NVPH or fan & pad |
