Subsidy guide · Betul district, Madhya Pradesh
NHB Subsidy Eligible Protected Cultivation Project in Multai
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
If you are planning a polyhouse or nethouse in Multai with government support, start here. We supply the material for subsidy projects across Madhya Pradesh and see the same questions every week: which scheme, how much, what papers and in what order. The answers below use Multai's climate and the general-area cost norms.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

NHB or MIDH: which scheme fits a project in Multai
For a project in Multai the first question is size. Up to 4,000 m², the MIDH route through the Madhya Pradesh horticulture department is usually simpler. Above 2,500 m², an NHB project with a bank loan becomes possible.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the Betul district horticulture office | NHB online portal (In-Principle Approval) and your bank |
Worked example: a 3,952 m² project in Multai
Take a fan and pad polyhouse of 3,952 m² in Multai, growing high-value vegetables. At that size it can go to NHB as a commercial project, or to MIDH since it is under 4,000 m². The most it can receive at NHB's general norms:
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Assistance is usually 50% of your actual eligible cost or of the cost norm, whichever is lower, so put every eligible cost in the project report: material, freight, erection, drip and planting material. Our material alone comes to ₹822 per m² this week against a structure norm of ₹1,400; freight and erection come on top.
Multai's weather, month by month
May is the hottest month, with afternoons around 41.1°C; January nights drop to about 10.6°C. July is the wettest (380 mm of 1,225 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 26.8°C | 10.6°C | 39% | 14 mm | 4.6 | 1.8 |
| Feb | 30.5°C | 13.7°C | 33% | 10 mm | 5.4 | 2 |
| Mar | 34.7°C | 18°C | 28% | 16 mm | 6.3 | 2 |
| Apr | 39.2°C | 22.6°C | 22% | 8 mm | 7 | 2.4 |
| May | 41.1°C | 26.4°C | 26% | 15 mm | 7 | 3.3 |
| Jun | 34.9°C | 24.9°C | 59% | 189 mm | 5.3 | 3.5 |
| Jul | 28.5°C | 22.3°C | 85% | 380 mm | 3.8 | 3.5 |
| Aug | 27.2°C | 21.8°C | 90% | 340 mm | 3.7 | 3.1 |
| Sep | 27.9°C | 21°C | 86% | 198 mm | 4.7 | 2 |
| Oct | 28.2°C | 17.9°C | 72% | 40 mm | 5.2 | 1.5 |
| Nov | 27.9°C | 13.9°C | 60% | 11 mm | 4.7 | 1.4 |
| Dec | 27.1°C | 11.2°C | 45% | 4 mm | 4.4 | 1.6 |
Steps to apply
- 1
Pick the structure and size
Match it to Multai's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
An itemised supplier quotation with HSN codes, and for NHB a detailed project report (DPR) with costs, crop plan and cash flow.
- 3
Apply before you build
MIDH: apply at the Betul district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Build with BIS-standard material and keep every test certificate and invoice: inspectors check the structure against the approved design.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Eligible structures and how they suit Multai
All four structures we supply are covered by the schemes. What matters for the project's success is the fit with Multai's weather.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Multai.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 41°C afternoon down to about 29°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Planting material norms and crops that suit
NHB also counts planting material and cultivation in the project cost, at these norms. The right column shows which groups suit this climate.
| Crop group | NHB norm | Suits Multai? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Documents you will usually need
- Land records in your name (in Madhya Pradesh: Khasra and B-1), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase
What we provide for your file:

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Material for your Multai project
We supply the complete material for subsidy projects in Madhya Pradesh from our Satara factory, about 800 km from Multai. See the kit and live price for your structure:
Across Betul district
Among the 84 towns we supply in Madhya Pradesh, Multai ranks 80th for summer heat and 18th for yearly rain. Other Betul district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a polyhouse in Multai eligible for NHB subsidy?
Yes, if the project is above 2,500 m² and set up as a commercial project with a bank loan. NHB gives a credit-linked, back-ended subsidy of 50% of project cost at its norms. Smaller projects can apply under MIDH through the Betul district horticulture office.
How much subsidy can I get on 1 acre in Multai?
For a 3,952 m² fan and pad polyhouse with high-value vegetables, up to about ₹30.43 lakh at NHB's general norms (50% of ₹60,86,080). The sanctioned figure depends on the approved project.
Does the material need to be ISI-marked?
The schemes expect structures that conform to technical standards. Our GI pipes carry the ISI mark and every order ships with lab test certificates.
Do you help with the subsidy file?
We provide the itemised quotation, specifications and test certificates the file needs. The application itself is made by you to the department or NHB.
Is the subsidy paid on my bill or on the cost norm?
Usually on whichever is lower: your actual eligible cost or the admissible cost norm. Include every eligible cost (material, freight, erection, irrigation, planting material) in the project report.
Can I build first and apply later?
No. NHB requires In-Principle Approval before work starts, and MIDH applications are approved before the structure is built. Apply first.
Subsidy projects near Multai
The same guide for nearby towns, with the structure that suits each.
| Town | From Multai | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Pandhurna | ~40 km | Pandhurna | General | NVPH or fan & pad |
| Subsidy project in Shendurjana | ~40 km | Amravati | General | NVPH or fan & pad |
| Subsidy project in Warud | ~40 km | Amravati | General | NVPH or fan & pad |
| Subsidy project in Sarni | ~50 km | Betul | General | NVPH or fan & pad |
| Subsidy project in Narkhed | ~60 km | Nagpur | General | NVPH or fan & pad |
| Subsidy project in Sausar | ~70 km | Chhindwara | General | NVPH or fan & pad |
