Subsidy guide · Dumka district, Jharkhand
NHB Subsidy Eligible Protected Cultivation Project in Dumka
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
If you are planning a polyhouse or nethouse in Dumka with government support, start here. We supply the material for subsidy projects across Jharkhand and see the same questions every week: which scheme, how much, what papers and in what order. The answers below use Dumka's climate and the general-area cost norms.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

NHB or MIDH: which scheme fits a project in Dumka
For a project in Dumka the first question is size. Up to 4,000 m², the MIDH route through the Jharkhand horticulture department is usually simpler. Above 2,500 m², an NHB project with a bank loan becomes possible.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the Dumka district horticulture office | NHB online portal (In-Principle Approval) and your bank |
Worked example: a 3,952 m² project in Dumka
Take a fan and pad polyhouse of 3,952 m² in Dumka, growing high-value vegetables. At that size it can go to NHB as a commercial project, or to MIDH since it is under 4,000 m². The most it can receive at NHB's general norms:
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Assistance is usually 50% of your actual eligible cost or of the cost norm, whichever is lower, so put every eligible cost in the project report: material, freight, erection, drip and planting material. Our material alone comes to ₹822 per m² this week against a structure norm of ₹1,400; freight and erection come on top.
Local market prices for polyhouse crops near Dumka
We averaged two years of daily Agmarknet prices from 12 markets in nearby districts (Birbhum, Paschim Bardhaman, Puruliya) for crops that are grown under cover. Okra (bhindi) swings the most: about ₹6,114 per quintal in February against ₹1,393 in May, a 339% difference. Cabbage is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Brinjal | 16 | ₹3,344/q | Aug · ₹4,604 | Feb · ₹1,794 | 157% |
| Tomato | 14 | ₹2,805/q | Aug · ₹4,386 | Apr · ₹1,073 | 309% |
| Green chilli | 6 | ₹6,730/q | Aug · ₹9,634 | Dec · ₹4,259 | 126% |
| Cabbage | 4 | ₹1,726/q | Nov · ₹2,699 | Mar · ₹1,197 | 125% |
| Okra (bhindi) | 4 | ₹3,769/q | Feb · ₹6,114 | May · ₹1,393 | 339% |
| Ridge gourd | 3 | ₹4,360/q | Feb · ₹6,905 | May · ₹2,382 | 190% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, brinjal peaks in August; at about 60 days to first harvest, transplant in June.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Brinjal | Jul, Aug, Sep, Oct | ~60 | June | Feb |
| Tomato | Aug, Nov, Dec | ~75 | May | Apr |
| Green chilli | Jul, Aug, Sep, Oct | ~75 | May | Dec |
| Cabbage | Nov | ~75 | August | Mar |
| Okra (bhindi) | Jan, Feb | ~45 | December | May |
| Ridge gourd | Jan, Feb | ~50 | December | May |
Dumka's weather, month by month
April is the hottest month, with afternoons around 39°C; January nights drop to about 8.7°C. July is the wettest (281 mm of 1,233 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 23.4°C | 8.7°C | 56% | 8 mm | 3.5 | 1.6 |
| Feb | 28.7°C | 12.8°C | 46% | 10 mm | 4.5 | 1.8 |
| Mar | 34.9°C | 18.3°C | 35% | 19 mm | 5.4 | 2 |
| Apr | 39°C | 23.3°C | 40% | 49 mm | 5.9 | 2 |
| May | 38.6°C | 25.7°C | 54% | 118 mm | 5.7 | 2.2 |
| Jun | 35.5°C | 26.5°C | 70% | 188 mm | 5 | 2.6 |
| Jul | 31.8°C | 25.6°C | 85% | 281 mm | 4.3 | 2.5 |
| Aug | 31°C | 25.3°C | 87% | 224 mm | 4.6 | 2.2 |
| Sep | 30.2°C | 24.4°C | 88% | 222 mm | 4.4 | 1.8 |
| Oct | 29.1°C | 20.8°C | 82% | 104 mm | 4.4 | 1.3 |
| Nov | 26.4°C | 14.9°C | 74% | 6 mm | 4 | 1.2 |
| Dec | 23.3°C | 10.1°C | 66% | 4 mm | 3.3 | 1.4 |
Steps to apply
- 1
Pick the structure and size
Match it to Dumka's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
An itemised supplier quotation with HSN codes, and for NHB a detailed project report (DPR) with costs, crop plan and cash flow.
- 3
Apply before you build
MIDH: apply at the Dumka district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Build with BIS-standard material and keep every test certificate and invoice: inspectors check the structure against the approved design.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Eligible structures and how they suit Dumka
All four structures we supply are covered by the schemes. What matters for the project's success is the fit with Dumka's weather.

Naturally ventilated polyhouse
Best fitFilm roof keeps July–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Dumka.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In April that can take a 39°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
Good fitFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Low rain here keeps it useful most of the year.

Curved nethouse
Good fitArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Rain passes through, so pick crops that tolerate it.
Planting material norms and crops that suit
NHB also counts planting material and cultivation in the project cost, at these norms. The right column shows which groups suit this climate.
| Crop group | NHB norm | Suits Dumka? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Documents you will usually need
- Land records in your name (in Jharkhand: Khatiyan), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase
What we provide for your file:

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Material for your Dumka project
We supply the complete material for subsidy projects in Jharkhand from our Satara factory, about 2,010 km from Dumka. See the kit and live price for your structure:
Dumka within Jharkhand
Among the 27 towns we supply in Jharkhand, Dumka ranks 21st for summer heat and 18th for yearly rain. Other Jharkhand towns on our list:
- Subsidy project in Jamshedpur
- Subsidy project in Dhanbad
- Subsidy project in Ranchi
- Subsidy project in Bokaro Steel City
- Subsidy project in Mango
- Subsidy project in Deoghar
- Subsidy project in Phusro
- Subsidy project in Adityapur
- Subsidy project in Hazaribagh
- Subsidy project in Giridih
- Subsidy project in Sahibganj
- Subsidy project in Ramgarh
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a polyhouse in Dumka eligible for NHB subsidy?
Yes, if the project is above 2,500 m² and set up as a commercial project with a bank loan. NHB gives a credit-linked, back-ended subsidy of 50% of project cost at its norms. Smaller projects can apply under MIDH through the Dumka district horticulture office.
How much subsidy can I get on 1 acre in Dumka?
For a 3,952 m² fan and pad polyhouse with high-value vegetables, up to about ₹30.43 lakh at NHB's general norms (50% of ₹60,86,080). The sanctioned figure depends on the approved project.
Does the material need to be ISI-marked?
The schemes expect structures that conform to technical standards. Our GI pipes carry the ISI mark and every order ships with lab test certificates.
Do you help with the subsidy file?
We provide the itemised quotation, specifications and test certificates the file needs. The application itself is made by you to the department or NHB.
Is the subsidy paid on my bill or on the cost norm?
Usually on whichever is lower: your actual eligible cost or the admissible cost norm. Include every eligible cost (material, freight, erection, irrigation, planting material) in the project report.
Can I build first and apply later?
No. NHB requires In-Principle Approval before work starts, and MIDH applications are approved before the structure is built. Apply first.
Subsidy projects near Dumka
The same guide for nearby towns, with the structure that suits each.
| Town | From Dumka | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Suri | ~60 km | Birbhum | General | NVPH or fan & pad |
| Subsidy project in Rampurhat | ~70 km | Birbhum | General | NVPH or fan & pad |
| Subsidy project in Sainthia | ~70 km | Birbhum | General | NVPH or fan & pad |
| Subsidy project in Deoghar | ~80 km | Deoghar | General | NVPH or fan & pad |
| Subsidy project in Madhupur | ~80 km | — | General | NVPH or fan & pad |
| Subsidy project in Pakaur | ~90 km | Pakur | General | NVPH or fan & pad |
