How it worksBuy individual items

NVPH materials · Balaghat district, Madhya Pradesh

Naturally Ventilated Polyhouse Materials Seller in Wara Seoni

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Wara Seoni, Balaghat district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Wara Seoni.

Hottest month
May, ~44°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~4 days
Naturally ventilated polyhouse built with our material, like those we supply to Wara Seoni
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Wara Seoni?

In May the air is dry enough (25% humidity) for an NVPH to vent well, but afternoons of 44°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureWara SeoniMadhya Pradesh average (84 towns)What it means for the NVPH
Hottest-month high44°C (May)42.7°C1.3°C hotter than the state average
Humidity in that month25%25%Dry in May, but humid from July to October
Rain a year1,349 mm1,036 mm313 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Wara Seoni
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Wara Seoni

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Wara Seoni; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor Wara SeoniWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.1 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 44°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~395 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Twelve months of weather in Wara Seoni

May is the hottest month, with afternoons around 42.8°C; January nights drop to about 10.3°C. July is the wettest (395 mm of 1,349 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan27.3°C10.3°C42%19 mm4.51.7
Feb31.1°C13.7°C36%17 mm5.41.8
Mar35.8°C18.5°C30%21 mm6.21.9
Apr40.6°C23.8°C22%12 mm72.2
May42.8°C27.8°C25%26 mm72.7
Jun36.4°C26.1°C57%207 mm5.32.9
Jul29.7°C23.2°C85%395 mm3.82.7
Aug28.5°C22.7°C89%369 mm3.72.4
Sep28.9°C21.8°C86%223 mm4.61.8
Oct28.5°C18.2°C76%46 mm5.11.4
Nov27.6°C13.7°C65%8 mm4.71.3
Dec26.9°C10.5°C52%6 mm4.31.4
NASA POWER long-term monthly averages for Wara Seoni (21.76, 80.04).

NVPH material list: 20 × 24 m in Wara Seoni

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Wara Seoni

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Wara Seoni and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Wara Seoni

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Wara Seoni's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~44°C highs
Strongest sun7.1 kWh/m²/day
Wettest month~395 mm
Humid (75%+)July–October
Nethouse seasonOctober–February
NASA POWER monthly averages for Wara Seoni.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 395 mm, the heaviest rain of the year.

  2. 2

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 44°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Wara Seoni

Coloured capsicum for Wara Seoni

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 44°C.

Cucumber (parthenocarpic) for Wara Seoni

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Wara Seoni

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Wara Seoni?

Wara Seoni is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 44°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in Wara SeoniCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Wara Seoni

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Wara Seoni is roughly 990 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Wara Seoni in about 4 days, carrying the invoice, the test reports and 100% invoice insurance.

Wara Seoni and the rest of Balaghat district

Wara Seoni is one of the hotter towns in Madhya Pradesh (15th of 84 we cover), and among the wettest (3rd for rain). We also supply 2 other towns in Balaghat district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Wara Seoni's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (44°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Wara Seoni?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Wara Seoni?

We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

NVPH materials near Wara Seoni

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom Wara SeoniHottest monthHumid monthsSuits
NVPH materials in Balaghat~20 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Tirora~50 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Tumsar~70 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Seoni~80 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Malaj Khand~100 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Nainpur~100 kmMay, 43°C4NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Wara Seoni
  2. Kryzen: Polyhouse farming in Wara Seoni
  3. NASA POWER monthly climate averages for Wara Seoni
  4. NHB cost norms for protected cultivation
Build your kit