How it worksBuy individual items

NVPH materials · Odisha

Naturally Ventilated Polyhouse Materials Seller in Titlagarh

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Titlagarh, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Titlagarh.

Hottest month
May, ~43°C
Humid (75%+)
5 months
NVPH material, 1 acre
₹734/m²
Delivery
~5 days
Naturally ventilated polyhouse built with our material, like those we supply to Titlagarh
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Titlagarh?

In May the air is dry enough (35% humidity) for an NVPH to vent well, but afternoons of 43°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureTitlagarhOdisha average (33 towns)What it means for the NVPH
Hottest-month high43°C (May)39.5°C3.5°C hotter than the state average
Humidity in that month35%49%Dry in May, but humid from July to November
Rain a year1,339 mm1,518 mm179 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Titlagarh
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Titlagarh

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Titlagarh; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor TitlagarhWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 6.6 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 43°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan5 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~364 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Titlagarh

We averaged two years of daily Agmarknet prices from 12 markets in nearby districts (Kalahandi, Bolangir, Kandhamal) for crops that are grown under cover. Tomato swings the most: about ₹3,676 per quintal in November against ₹1,306 in March, a 181% difference. Cucumber is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Tomato19₹2,684/qNov · ₹3,676Mar · ₹1,306181%
Brinjal19₹2,564/qNov · ₹3,132Mar · ₹1,87267%
Cabbage19₹2,570/qNov · ₹3,111Feb · ₹1,95859%
Cauliflower17₹3,815/qOct · ₹5,765Feb · ₹2,190163%
Okra (bhindi)17₹4,028/qDec · ₹6,548Jul · ₹2,519160%
Bitter gourd12₹4,344/qDec · ₹6,423Jun · ₹3,41188%
Cucumber10₹2,950/qJan · ₹3,500Jun · ₹2,49940%
Green chilli15₹6,646/qJul · ₹7,927Dec · ₹5,35048%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Kalahandi, Bolangir, Kandhamal). ₹ per quintal (100 kg).

When to plant in Titlagarh for the best prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in November; at about 75 days to first harvest, transplant in August.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoNov~75AugustMar
BrinjalAug, Sep, Oct, Nov, Dec~60SeptemberMar
CabbageJul, Aug, Sep, Oct, Nov~75AugustFeb
CauliflowerAug, Sep, Oct~75JulyFeb
Okra (bhindi)Feb, Dec~45OctoberJul
Bitter gourdDec~55OctoberJun
CucumberJan, Nov, Dec~40NovemberJun
Green chilliMar, Jul~75AprilDec
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Titlagarh's weather, month by month

May is the hottest month, with afternoons around 42.8°C; January nights drop to about 11.5°C. July is the wettest (364 mm of 1,339 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan26.3°C11.5°C59%10 mm4.41.2
Feb31.3°C14.8°C48%13 mm5.31.4
Mar36.8°C20.1°C37%17 mm5.91.6
Apr41.3°C25.1°C32%28 mm6.62
May42.8°C28°C35%37 mm6.62.5
Jun35.9°C26.4°C62%199 mm52.9
Jul30.7°C24.1°C83%364 mm3.92.7
Aug29.7°C23.7°C87%337 mm3.92.4
Sep29.7°C23.2°C87%235 mm4.61.7
Oct28.9°C20.3°C81%77 mm4.91.3
Nov26.5°C15.7°C77%11 mm4.51.1
Dec24.6°C12°C70%11 mm4.11.1
NASA POWER long-term monthly averages for Titlagarh (20.29, 83.15).

NVPH material list: 20 × 24 m in Titlagarh

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Titlagarh

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Titlagarh and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Titlagarh

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Titlagarh's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~43°C highs
Strongest sun6.6 kWh/m²/day
Wettest month~364 mm
Humid (75%+)July–November
Nethouse seasonOctober–February
NASA POWER monthly averages for Titlagarh.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 364 mm, the heaviest rain of the year.

  2. 2

    July to November

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 43°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Titlagarh

Coloured capsicum for Titlagarh

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic) for Titlagarh

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Titlagarh

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Titlagarh?

Titlagarh is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 43°C down to about 32°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~32°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in TitlagarhCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Titlagarh

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 1,300 km from Titlagarh by road. Expect the material in about 5 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Titlagarh within Odisha

Titlagarh is one of the hotter towns in Odisha (3rd of 33 we cover), and among the driest (32nd for rain). These are the larger towns we supply elsewhere in Odisha.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Titlagarh's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (43°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Titlagarh?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

How long does delivery to Titlagarh take?

About 1,300 km by road from our Satara factory, so usually in about 5 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Titlagarh?

We recommend it: 5 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

NVPH materials near Titlagarh

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom TitlagarhHottest monthHumid monthsSuits
NVPH materials in Bhawanipatna~60 kmMay, 41°C5NVPH + fan & pad
NVPH materials in Balangir~80 kmMay, 42°C5NVPH + fan & pad
NVPH materials in Phulabani~150 kmMay, 40°C5NVPH + fan & pad
NVPH materials in Bargarh~160 kmMay, 43°C4NVPH + fan & pad
NVPH materials in Nabarangapur~170 kmApr, 37°C5NVPH + fan & pad
NVPH materials in Rayagada~170 kmApr, 40°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Titlagarh
  2. Kryzen: Polyhouse farming in Titlagarh
  3. NASA POWER monthly climate averages for Titlagarh
  4. NHB cost norms for protected cultivation
Build your kit