How it worksBuy individual items

NVPH materials · Malappuram district, Kerala

Naturally Ventilated Polyhouse Materials Seller in Tirur

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Tirur, Malappuram district, the frame and film are only half the decision; the other half is how the house breathes in March and drains in June. Here is the NVPH kit we supply, priced this week, with the choices we would make for Tirur.

Hottest month
March, ~31°C
Humid (75%+)
8 months
NVPH material, 1 acre
₹734/m²
Delivery
~4 days
Naturally ventilated polyhouse built with our material, like those we supply to Tirur
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Tirur?

With highs of about 31°C in March, natural ventilation keeps the house within range for most crops without any running cost. The roof vent and side curtains do the work; you only manage them by the season.

MeasureTirurKerala average (48 towns)What it means for the NVPH
Hottest-month high31°C (March)34.2°C3.2°C cooler than the state average
Humidity in that month70%65%Keep curtains open; disease risk is higher
Rain a year2,315 mm2,357 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Tirur
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Tirur

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Tirur; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor TirurWhy
Roof film250-micron white diffused polyfilmKeepSpreads March's 6.4 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan8 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJune brings ~491 mm; clean before May
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Tirur

Across 12 mandis in Malappuram district, 8 polyhouse and nethouse crops trade regularly. Bottle gourd has the most arrivals; Tomato has the widest price swing (148%), peaking in December.

CropMarketsAverageHighest monthLowest monthSwing
Bottle gourd29₹2,417/qAug · ₹3,044Feb · ₹1,75773%
Okra (bhindi)29₹3,721/qDec · ₹4,121Jun · ₹3,29625%
Cucumber30₹2,420/qAug · ₹3,042Mar · ₹1,94956%
Bitter gourd29₹4,419/qAug · ₹5,145Mar · ₹3,79935%
Cabbage18₹2,105/qDec · ₹2,632Mar · ₹1,54171%
Brinjal20₹2,983/qNov · ₹3,801Mar · ₹2,02887%
Cauliflower18₹3,337/qNov · ₹4,189Mar · ₹2,47369%
Tomato20₹2,553/qDec · ₹3,582Mar · ₹1,444148%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Malappuram district. ₹ per quintal (100 kg).

Timing your crop for the Tirur market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, bottle gourd peaks in August; at about 55 days to first harvest, transplant in June.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Bottle gourdJul, Aug, Sep, Dec~55JuneFeb
Okra (bhindi)Jan, Feb, Mar, Apr, Aug, Nov, Dec~45OctoberJun
CucumberJul, Aug, Sep~40JuneMar
Bitter gourdMay, Jul, Aug~55JuneMar
CabbageJan, Jun, Jul, Dec~75SeptemberMar
BrinjalAug, Nov~60SeptemberMar
CauliflowerOct, Nov, Dec~75AugustMar
TomatoDec~75SeptemberMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Tirur's weather, month by month

March is the hottest month, with afternoons around 31.4°C; January nights drop to about 24.6°C. June is the wettest (491 mm of 2,315 mm a year), and humidity stays at 75% or more for 8 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Mar, Apr, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan30.4°C24.6°C66%5 mm5.52.6
Feb31.1°C25.4°C66%9 mm6.12.7
Mar31.4°C26.7°C70%33 mm6.42.8
Apr30.8°C27.5°C77%92 mm6.22.8
May29.9°C27.6°C81%224 mm5.33.5
Jun28.4°C26.8°C85%491 mm4.24.3
Jul27.3°C25.8°C88%468 mm4.34.2
Aug27.1°C25.4°C89%352 mm4.93.9
Sep27.5°C25.5°C87%240 mm5.43.4
Oct28.2°C26°C82%245 mm52.7
Nov29°C25.8°C77%128 mm4.92.2
Dec29.7°C24.9°C70%28 mm5.12.4
NASA POWER long-term monthly averages for Tirur (10.91, 75.92).

NVPH material list: 28 × 36 m in Tirur

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Tirur

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Tirur and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Tirur

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Tirur's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~31°C highs
Strongest sun6.4 kWh/m²/day
Wettest month~491 mm
Humid (75%+)April–November
Nethouse seasonDecember–April
NASA POWER monthly averages for Tirur.
  1. 1

    Before June

    Clear gutters and funnels, check the film for tears and tighten the GI springs. June brings about 491 mm, the heaviest rain of the year.

  2. 2

    April to November

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    March

    Peak heat, about 31°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  4. 4

    December to April

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Tirur

Coloured capsicum for Tirur

Coloured capsicum

NVPH

The most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic) for Tirur

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; keep the curtains open in humid months to limit disease.

Tomato for Tirur

Tomato

NVPH

Indeterminate varieties trained up strings give a long harvest under cover.

Gerbera and rose for Tirur

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Tirur?

In Tirur the NVPH is the clear choice for most growers: at 70% humidity in March, pads would cool only a few degrees while adding power and water bills.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in TirurCapsicum, cucumber, tomato, flowersRarely worth it at this humidity

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Tirur

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 1,060 km from Tirur by road. Expect the material in about 4 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Tirur and the rest of Malappuram district

Tirur is one of the cooler towns in Kerala (47th hottest of 48), and in the middle for rain (24th). We also supply 2 other towns in Malappuram district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Tirur's summer?

Yes for most crops. 31°C at 70% humidity is best handled by open curtains and shade net; pad cooling would add little at that humidity.

What does NVPH material cost in Tirur?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Tirur take?

About 1,060 km by road from our Satara factory, so usually in about 4 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Tirur

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom TirurHottest monthHumid monthsSuits
NVPH materials in Ponnani~20 kmMar, 31°C8NVPH
NVPH materials in Malappuram~30 kmMar, 37°C8NVPH
NVPH materials in Kunnamkulam~40 kmMar, 35°C8NVPH
NVPH materials in Perinthalmanna~40 kmMar, 37°C8NVPH
NVPH materials in Guruvayoor~50 kmMar, 35°C8NVPH
NVPH materials in Kozhikode~50 kmMar, 34°C8NVPH

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Tirur
  2. Kryzen: Polyhouse farming in Tirur
  3. NASA POWER monthly climate averages for Tirur
  4. NHB cost norms for protected cultivation
Build your kit