How it worksBuy individual items

NVPH materials · Tinsukia district, Assam

Naturally Ventilated Polyhouse Materials Seller in Tinsukia

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Tinsukia's numbers — August afternoons of about 34°C, 2,230 mm of rain a year and humid air from June to October — and the NVPH material we would send for them.

Hottest month
August, ~34°C
Humid (75%+)
5 months
NVPH material, 1 acre
₹734/m²
Delivery
~9 days
Naturally ventilated polyhouse built with our material, like those we supply to Tinsukia
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Tinsukia?

With highs of about 34°C in August, natural ventilation keeps the house within range for most crops without any running cost. The roof vent and side curtains do the work; you only manage them by the season.

MeasureTinsukiaAssam average (24 towns)What it means for the NVPH
Hottest-month high34°C (August)33.1°C0.9°C hotter than the state average
Humidity in that month79%75%Keep curtains open; disease risk is higher
Rain a year2,230 mm2,020 mm210 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Tinsukia
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Tinsukia

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Tinsukia; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor TinsukiaWhy
Roof film250-micron white diffused polyfilmKeepSpreads strong light and cuts scorch
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan5 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~451 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Tinsukia

We averaged two years of daily Agmarknet prices from 2 markets in Tinsukia district for crops that are grown under cover. Beans swings the most: about ₹12,800 per quintal in September against ₹2,775 in March, a 361% difference. Ridge gourd is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Cucumber2₹3,028/qSep · ₹4,083Jun · ₹2,44667%
Cabbage2₹2,539/qSep · ₹3,033Mar · ₹1,66982%
Beans2₹8,058/qSep · ₹12,800Mar · ₹2,775361%
Green chilli2₹9,042/qAug · ₹12,920Jun · ₹6,73192%
Tomato2₹3,531/qJun · ₹5,000Mar · ₹1,587215%
Brinjal1₹3,411/qOct · ₹3,968Jun · ₹2,35069%
Ridge gourd1₹3,740/qOct · ₹4,677Jun · ₹3,02255%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Tinsukia district. ₹ per quintal (100 kg).

Timing your crop for the Tinsukia market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cucumber peaks in September; at about 40 days to first harvest, transplant in July.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
CucumberSep, Oct~40JulyJun
CabbageAug, Sep, Oct~75JuneMar
BeansSep~50JulyMar
Green chilliAug~75MayJun
TomatoJun~75MarchMar
BrinjalAug, Oct, Nov~60AugustJun
Ridge gourdOct~50AugustJun
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Tinsukia month by month

August is the hottest month, with afternoons around 34.2°C; January nights drop to about 9.7°C. July is the wettest (451 mm of 2,230 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Mar, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan21.6°C9.7°C71%18 mm3.60.5
Feb24.9°C12.3°C66%43 mm3.90.5
Mar29.3°C16.1°C61%88 mm4.20.5
Apr32°C19.7°C65%210 mm4.20.5
May33.7°C22.2°C69%281 mm4.50.4
Jun34.1°C24.3°C76%360 mm4.40.3
Jul33.8°C25°C80%451 mm4.20.3
Aug34.2°C25°C79%351 mm4.50.3
Sep32.6°C23.6°C80%294 mm4.30.3
Oct29.9°C20.2°C78%107 mm4.30.3
Nov26.3°C15.3°C74%19 mm40.5
Dec22.6°C11.5°C73%8 mm3.60.5
NASA POWER long-term monthly averages for Tinsukia (27.49, 95.36).

NVPH material list: 28 × 36 m in Tinsukia

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Tinsukia

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Tinsukia and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Tinsukia

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Tinsukia's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~34°C highs
Wettest month~451 mm
Humid (75%+)June–October
Nethouse seasonFebruary–March
NASA POWER monthly averages for Tinsukia.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 451 mm, the heaviest rain of the year.

  2. 2

    June to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    August

    Peak heat, about 34°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  4. 4

    February to March

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Tinsukia

Coloured capsicum for Tinsukia

Coloured capsicum

NVPH

The most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic) for Tinsukia

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; keep the curtains open in humid months to limit disease.

Tomato for Tinsukia

Tomato

NVPH

Indeterminate varieties trained up strings give a long harvest under cover.

Gerbera and rose for Tinsukia

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Tinsukia?

In Tinsukia the NVPH is the clear choice for most growers: at 79% humidity in August, pads would cool only a few degrees while adding power and water bills.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in TinsukiaCapsicum, cucumber, tomato, flowersRarely worth it at this humidity

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board; cost norms in Assam are about 15% higher.

Subsidy for a project in Tinsukia

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 3,160 km from Tinsukia by road. Expect the material in about 9 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Tinsukia and the rest of Tinsukia district

Tinsukia is mid-table for heat in Assam (7th of 24), and among the wettest (6th for rain). We also supply 1 other town in Tinsukia district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Tinsukia's summer?

Yes for most crops. 34°C at 79% humidity is best handled by open curtains and shade net; pad cooling would add little at that humidity.

What does NVPH material cost in Tinsukia?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Do I need an entry cabin in Tinsukia?

We recommend it: 5 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Tinsukia take?

About 3,160 km by road from our Satara factory, so usually in about 9 days after dispatch.

NVPH materials near Tinsukia

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom TinsukiaHottest monthHumid monthsSuits
NVPH materials in Margherita~50 kmAug, 34°C5NVPH
NVPH materials in Dibrugarh~60 kmAug, 34°C5NVPH
NVPH materials in Pasighat~80 kmAug, 34°C3NVPH
NVPH materials in Silapathar~80 kmAug, 34°C5NVPH
NVPH materials in Sibsagar~120 kmJun, 32°C7NVPH
NVPH materials in North Lakhimpur~170 kmJun, 32°C7NVPH

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Tinsukia
  2. Kryzen: Polyhouse farming in Tinsukia
  3. NASA POWER monthly climate averages for Tinsukia
  4. NHB cost norms for protected cultivation
Build your kit