How it worksBuy individual items

NVPH materials · West Godavari district, Andhra Pradesh

Naturally Ventilated Polyhouse Materials Seller in Tanuku

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Tanuku, West Godavari district, the frame and film are only half the decision; the other half is how the house breathes in April and drains in October. Here is the NVPH kit we supply, priced this week, with the choices we would make for Tanuku.

Hottest month
April, ~39°C
Humid (75%+)
6 months
NVPH material, 1 acre
₹734/m²
Delivery
~4 days
Naturally ventilated polyhouse built with our material, like those we supply to Tanuku
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Tanuku?

39°C in April is hot, but at 59% humidity evaporative cooling would not help much, so natural ventilation plus shading is the sensible design: keep the side curtains fully open and pull a shade net over the crop through the hottest weeks.

MeasureTanukuAndhra Pradesh average (84 towns)What it means for the NVPH
Hottest-month high39°C (April)38.4°Cclose to the state average
Humidity in that month59%54%Dry in April, but humid from July to December
Rain a year1,173 mm998 mm175 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Tanuku
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Tanuku

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Tanuku; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor TanukuWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 6.4 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan6 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepOctober brings ~220 mm; clean before September
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Tanuku

Prices at the mandis in Andhra Pradesh follow a clear yearly pattern. Tomato is the extreme case, from ₹1,018 per quintal in March up to ₹2,937 in December (189% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Tomato22₹1,922/qDec · ₹2,937Mar · ₹1,018189%
Brinjal2₹2,366/qJun · ₹3,671Mar · ₹1,741111%
Cabbage2₹1,017/qJun · ₹1,563Mar · ₹697124%
Beans5₹4,736/qJun · ₹7,660Jan · ₹2,867167%
Green chilli2₹3,484/qAug · ₹4,074Jun · ₹3,18328%
Cauliflower2₹1,140/qOct · ₹1,440Mar · ₹86566%
Ridge gourd2₹2,251/qDec · ₹2,872Mar · ₹1,82258%
Papaya4₹1,980/qMay · ₹2,871Nov · ₹1,45897%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Andhra Pradesh. ₹ per quintal (100 kg).

Timing your crop for the Tanuku market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoDec~75SeptemberMar
BrinjalJun, Nov~60AprilMar
CabbageJun~75MarchMar
BeansMay, Jun, Jul~50AprilJan
Green chilliFeb, Apr, Aug~75MayJun
CauliflowerOct, Nov~75JulyMar
Ridge gourdNov, Dec~50OctoberMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Tanuku

April is the hottest month, with afternoons around 38.5°C; January nights drop to about 17.3°C. October is the wettest (220 mm of 1,173 mm a year), and humidity stays at 75% or more for 6 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.9°C17.3°C70%5 mm4.81.8
Feb33.3°C19°C64%9 mm5.51.9
Mar36.9°C22.1°C59%11 mm62.1
Apr38.5°C24.8°C59%25 mm6.42.5
May37.9°C26.8°C62%58 mm6.12.5
Jun33.6°C26°C73%154 mm4.92.8
Jul31.2°C24.8°C81%205 mm4.42.9
Aug30°C24.3°C86%194 mm4.62.6
Sep29.9°C24.2°C87%201 mm4.71.9
Oct29.9°C23.1°C84%220 mm4.61.7
Nov28.8°C20.1°C80%70 mm4.51.9
Dec28.3°C17.7°C75%21 mm4.41.9
NASA POWER long-term monthly averages for Tanuku (16.75, 81.68).

NVPH material list: 20 × 24 m in Tanuku

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Tanuku

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Tanuku and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Tanuku

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Tanuku's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~39°C highs
Strongest sun6.4 kWh/m²/day
Wettest month~220 mm
Humid (75%+)July–December
Nethouse seasonNovember–February
NASA POWER monthly averages for Tanuku.
  1. 1

    Before October

    Clear gutters and funnels, check the film for tears and tighten the GI springs. October brings about 220 mm, the heaviest rain of the year.

  2. 2

    July to December

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    April

    Peak heat, about 39°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  4. 4

    November to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Tanuku

Coloured capsicum for Tanuku

Coloured capsicum

NVPH

Grow under shade net through April, when highs reach 39°C.

Cucumber (parthenocarpic) for Tanuku

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Tanuku

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Tanuku?

In Tanuku the NVPH is the clear choice for most growers: at 59% humidity in April, pads would cool only a few degrees while adding power and water bills.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in TanukuCapsicum, cucumber, tomato, flowersRarely worth it at this humidity

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Tanuku

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 1,080 km from Tanuku by road. Expect the material in about 4 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Tanuku and the rest of West Godavari district

Tanuku is mid-table for heat in Andhra Pradesh (44th of 84), and in the middle for rain (26th). We also supply 6 other towns in West Godavari district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Tanuku's summer?

Yes for most crops. 39°C at 59% humidity is best handled by open curtains and shade net; pad cooling would add little at that humidity.

What does NVPH material cost in Tanuku?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

How long does delivery to Tanuku take?

About 1,080 km by road from our Satara factory, so usually in about 4 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Tanuku?

We recommend it: 6 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

NVPH materials near Tanuku

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom TanukuHottest monthHumid monthsSuits
NVPH materials in Nidadavole~20 kmApr, 39°C6NVPH
NVPH materials in Tadepalligudem~20 kmApr, 40°C5NVPH
NVPH materials in Palacole~30 kmMay, 35°C6NVPH
NVPH materials in Bhimavaram~40 kmMay, 37°C5NVPH
NVPH materials in Kovvur~40 kmApr, 39°C6NVPH
NVPH materials in Mandapeta~40 kmApr, 39°C6NVPH

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Tanuku
  2. Kryzen: Polyhouse farming in Tanuku
  3. NASA POWER monthly climate averages for Tanuku
  4. NHB cost norms for protected cultivation
Build your kit