How it worksBuy individual items

NVPH materials · Jharkhand

Naturally Ventilated Polyhouse Materials Seller in Simdega

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Simdega's numbers — May afternoons of about 41°C, 1,376 mm of rain a year and humid air from July to October — and the NVPH material we would send for them.

Hottest month
May, ~41°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~5 days
Naturally ventilated polyhouse built with our material, like those we supply to Simdega
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Simdega?

In May the air is dry enough (36% humidity) for an NVPH to vent well, but afternoons of 41°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureSimdegaJharkhand average (27 towns)What it means for the NVPH
Hottest-month high41°C (May)39.8°C1.2°C hotter than the state average
Humidity in that month36%42%Dry in May, but humid from July to October
Rain a year1,376 mm1,306 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Simdega
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Simdega

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Simdega; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor SimdegaWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 6.7 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 41°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~372 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Local market prices for polyhouse crops near Simdega

Across 7 mandis in nearby districts (Sundergarh, Jharsuguda), 8 polyhouse and nethouse crops trade regularly. Tomato has the most arrivals; Tomato has the widest price swing (153%), peaking in December.

CropMarketsAverageHighest monthLowest monthSwing
Tomato7₹2,834/qDec · ₹3,709Apr · ₹1,465153%
Brinjal6₹2,718/qNov · ₹3,296Mar · ₹1,80982%
Okra (bhindi)6₹3,785/qDec · ₹5,051May · ₹2,75883%
Cabbage6₹2,861/qSep · ₹3,773Mar · ₹1,93895%
Cauliflower6₹3,723/qOct · ₹5,590Mar · ₹2,323141%
Cucumber6₹3,325/qDec · ₹3,661Apr · ₹2,86528%
Bottle gourd3₹2,028/qOct · ₹2,434Apr · ₹1,84732%
Green chilli5₹6,030/qAug · ₹7,919Dec · ₹4,71368%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Sundergarh, Jharsuguda). ₹ per quintal (100 kg).

Timing your crop for the Simdega market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoJul, Aug, Nov, Dec~75SeptemberApr
BrinjalJul, Aug, Sep, Oct, Nov, Dec~60SeptemberMar
Okra (bhindi)Feb, Dec~45OctoberMay
CabbageSep, Nov~75JuneMar
CauliflowerOct, Nov~75JulyMar
CucumberJan, Feb, Mar, Jun, Sep, Nov, Dec~40OctoberApr
Bottle gourdAug, Sep, Oct~55AugustApr
Green chilliFeb, Aug~75MayDec
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Simdega's weather, month by month

May is the hottest month, with afternoons around 41.3°C; January nights drop to about 9.3°C. July is the wettest (372 mm of 1,376 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan24.6°C9.3°C55%13 mm4.31.5
Feb29.3°C12.9°C45%15 mm5.21.7
Mar34.7°C18°C35%22 mm5.91.9
Apr39.7°C23.4°C29%26 mm6.72
May41.3°C26.3°C36%50 mm6.62.1
Jun35.7°C25.8°C62%207 mm5.22.5
Jul30.3°C23.8°C84%372 mm4.12.5
Aug29.2°C23.5°C89%349 mm4.22.2
Sep29.1°C22.7°C87%227 mm4.51.7
Oct28.2°C19.1°C79%77 mm4.81.4
Nov25.9°C13.9°C72%8 mm4.41.3
Dec23.7°C9.9°C65%10 mm4.11.3
NASA POWER long-term monthly averages for Simdega (22.61, 84.50).

NVPH material list: 52 × 76 m in Simdega

A 52 m wide, 76 m long naturally ventilated polyhouse (3,952 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureBig Bottom (60X2.0X8000)102 nos2,546 kg
GI structureSmall Column (76X2.0X4500)133 nos2,250 kg
GI structureGutter Purlin (42X2.0X4000)170 nos1,414 kg
GI structureGI Gutter Sheet375 mtr—
GI structureBig Arc (42X2.0X5200)114 nos1,233 kg
GI structureSide Hockey (60X2.0X5500)64 nos1,098 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)722 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)501 mtr—
Film & netsSide Insect Net (5.2 m)258 mtr—
Film & netsWhite Shade Net 50%864 mtr—
Film & netsSide Skirting Apron (1.5 m)258 mtr—
Fittings & accessoriesAluminium Profile2,592 mtr—
Fittings & accessoriesF Bracket228 nos—
Fittings & accessoriesGI Spring4,425 mtr—
Fittings & accessoriesSelf Drilling Screw5,832 nos—
Fittings & accessoriesNylon Rope 12 mm (200 m Bundle)11 nos—
Fittings & accessoriesT Joint (Tee)102 nos—
The largest items of a 52 × 76 m kit (68 items in all, about 16.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Simdega

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Simdega and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Simdega

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Simdega's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~41°C highs
Strongest sun6.7 kWh/m²/day
Wettest month~372 mm
Humid (75%+)July–October
NASA POWER monthly averages for Simdega.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 372 mm, the heaviest rain of the year.

  2. 2

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 41°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

Crops for an NVPH in Simdega

Coloured capsicum for Simdega

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 41°C.

Cucumber (parthenocarpic) for Simdega

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Simdega

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Simdega?

Simdega is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 41°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in SimdegaCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Simdega

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 1,580 km from Simdega by road. Expect the material in about 5 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Simdega within Jharkhand

Simdega is one of the hotter towns in Jharkhand (3rd of 27 we cover), and among the wettest (7th for rain). These are the larger towns we supply elsewhere in Jharkhand.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Simdega's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (41°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Simdega?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Simdega take?

About 1,580 km by road from our Satara factory, so usually in about 5 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Simdega

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom SimdegaHottest monthHumid monthsSuits
NVPH materials in Rajagangapur~60 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Rourkela~70 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Sundargarh~100 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Lohardaga~120 kmMay, 39°C4NVPH + fan & pad
NVPH materials in Jharsuguda~130 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Barbil~140 kmApr, 39°C4NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Simdega
  2. Kryzen: Polyhouse farming in Simdega
  3. NASA POWER monthly climate averages for Simdega
  4. NHB cost norms for protected cultivation
Build your kit