How it worksBuy individual items

NVPH materials · Amreli district, Gujarat

Naturally Ventilated Polyhouse Materials Seller in Savarkundla

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Savarkundla, Amreli district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Savarkundla.

Hottest month
May, ~41°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Savarkundla
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Savarkundla?

In May the air is dry enough (48% humidity) for an NVPH to vent well, but afternoons of 41°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureSavarkundlaGujarat average (74 towns)What it means for the NVPH
Hottest-month high41°C (May)40.5°Cclose to the state average
Humidity in that month48%45%Dry air vents easily
Rain a year816 mm894 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Savarkundla
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Savarkundla

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Savarkundla; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor SavarkundlaWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.3 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 41°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~272 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Savarkundla

We averaged two years of daily Agmarknet prices from 3 markets in Amreli district for crops that are grown under cover. Coriander (leaves) swings the most: about ₹6,299 per quintal in October against ₹1,332 in January, a 373% difference. Bottle gourd is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Okra (bhindi)2₹3,387/qJan · ₹4,536Sep · ₹2,27999%
Cauliflower2₹2,896/qJul · ₹4,766Jan · ₹1,760171%
Tomato2₹3,009/qJun · ₹4,237Feb · ₹1,997112%
Cabbage2₹2,050/qJul · ₹2,603Jan · ₹1,255107%
Green chilli2₹3,648/qJul · ₹5,447Dec · ₹2,538115%
Brinjal2₹2,731/qNov · ₹4,828Aug · ₹1,805167%
Coriander (leaves)2₹3,843/qOct · ₹6,299Jan · ₹1,332373%
Bottle gourd1₹3,155/qFeb · ₹3,761Dec · ₹2,54348%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Amreli district. ₹ per quintal (100 kg).

Timing your crop for the Savarkundla market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, okra (bhindi) peaks in January; at about 45 days to first harvest, transplant in November.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Okra (bhindi)Jan~45NovemberSep
CauliflowerJun, Jul~75AprilJan
TomatoJun, Jul~75MarchFeb
CabbageJul, Aug, Sep~75AprilJan
Green chilliJul~75AprilDec
BrinjalNov~60SeptemberAug
Coriander (leaves)Jul, Oct~35AugustJan
Bottle gourdFeb, Jun, Jul~55DecemberDec
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Savarkundla month by month

May is the hottest month, with afternoons around 41.3°C; January nights drop to about 12.2°C. July is the wettest (272 mm of 816 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.8°C12.2°C33%1 mm4.72.4
Feb33.2°C14.6°C32%1 mm5.62.4
Mar37.5°C18.8°C33%1 mm6.62.7
Apr41.2°C22.5°C37%2 mm7.23.3
May41.3°C24.8°C48%3 mm7.34.5
Jun35.7°C26°C66%143 mm5.64.5
Jul31.4°C24.5°C81%272 mm4.24.3
Aug30.2°C23.5°C85%224 mm4.13.6
Sep31.1°C22.6°C82%145 mm52.4
Oct33.2°C20.6°C65%16 mm5.41.7
Nov32.4°C17.1°C50%7 mm4.71.8
Dec30.3°C13.5°C38%1 mm4.42.2
NASA POWER long-term monthly averages for Savarkundla (21.34, 71.30).

NVPH material list: 20 × 24 m in Savarkundla

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Savarkundla

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Savarkundla and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Savarkundla

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Savarkundla's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~41°C highs
Strongest sun7.3 kWh/m²/day
Wettest month~272 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Savarkundla.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 272 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 41°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Savarkundla

Coloured capsicum for Savarkundla

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 41°C.

Cucumber (parthenocarpic) for Savarkundla

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Savarkundla

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Savarkundla?

Savarkundla is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 41°C down to about 34°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~34°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in SavarkundlaCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Savarkundla

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Savarkundla is roughly 600 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Savarkundla in about 3 days, carrying the invoice, the test reports and 100% invoice insurance.

Savarkundla and the rest of Amreli district

Savarkundla is mid-table for heat in Gujarat (44th of 74), and in the middle for rain (38th). We also supply 2 other towns in Amreli district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Savarkundla's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (41°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Savarkundla?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Savarkundla take?

About 600 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Savarkundla

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom SavarkundlaHottest monthHumid monthsSuits
NVPH materials in Amreli~40 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Rajula~50 kmApr, 38°C3NVPH + fan & pad
NVPH materials in Lathi~60 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Mahuva~70 kmMay, 35°C4NVPH
NVPH materials in Palitana~80 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Una~80 kmApr, 38°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Savarkundla
  2. Kryzen: Polyhouse farming in Savarkundla
  3. NASA POWER monthly climate averages for Savarkundla
  4. NHB cost norms for protected cultivation
Build your kit