How it worksBuy individual items

NVPH materials · Satara district, Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Satara

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Satara, the frame and film are only half the decision; the other half is how the house breathes in April and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Satara.

Hottest month
April, ~37°C
Humid (75%+)
5 months
NVPH material, 1 acre
₹734/m²
Delivery
Next day
Naturally ventilated polyhouse built with our material, like those we supply to Satara
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Satara?

In April the air is dry enough (46% humidity) for an NVPH to vent well, but afternoons of 37°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through April, compare with a fan and pad house below.

MeasureSataraMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high37°C (April)40.7°C3.7°C cooler than the state average
Humidity in that month46%35%Dry in April, but humid from June to October
Rain a year2,045 mm1,176 mm869 mm more than the state average
Altitude742 m659 mNights stay mild
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Satara
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Satara

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Satara; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor SataraWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 7 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 37°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan5 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~625 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Satara

Across 12 mandis in Satara district, 8 polyhouse and nethouse crops trade regularly. Green chilli has the most arrivals; Cabbage has the widest price swing (128%), peaking in November.

CropMarketsAverageHighest monthLowest monthSwing
Green chilli18₹3,883/qMar · ₹4,901Dec · ₹2,92368%
Brinjal18₹2,574/qNov · ₹3,182Jan · ₹2,01458%
Tomato17₹1,520/qDec · ₹2,048Apr · ₹1,16775%
Okra (bhindi)13₹3,494/qDec · ₹4,271Apr · ₹2,75055%
Cabbage13₹1,154/qNov · ₹1,558Apr · ₹682128%
Cauliflower10₹2,159/qJun · ₹3,182Mar · ₹1,423124%
Cucumber11₹1,868/qJun · ₹2,276Mar · ₹1,49652%
Bottle gourd9₹1,585/qJul · ₹1,867Mar · ₹1,33140%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Satara district. ₹ per quintal (100 kg).

Timing your crop for the Satara market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, green chilli peaks in March; at about 75 days to first harvest, transplant in December.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Green chilliFeb, Mar~75DecemberDec
BrinjalJun, Jul, Aug, Oct, Nov~60SeptemberJan
TomatoDec~75SeptemberApr
Okra (bhindi)Jan, Feb, Dec~45OctoberApr
CabbageJun, Jul, Nov, Dec~75AugustApr
CauliflowerJun, Jul~75MarchMar
CucumberJan, May, Jun~40AprilMar
Bottle gourdJun, Jul, Aug, Nov~55MayMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Satara's weather, month by month

April is the hottest month, with afternoons around 38.4°C; January nights drop to about 13.7°C. July is the wettest (625 mm of 2,045 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan30.6°C13.7°C49%0 mm5.11.9
Feb33.9°C15.8°C41%1 mm5.92
Mar36.7°C18.5°C41%3 mm6.62.1
Apr38.4°C20.8°C46%4 mm72.3
May36°C22.2°C60%48 mm6.83.1
Jun28.8°C22.6°C83%457 mm4.34
Jul26.1°C22.1°C92%625 mm3.34.6
Aug25.8°C21.5°C92%485 mm3.63.9
Sep26.7°C20.8°C90%290 mm4.32.5
Oct28.2°C19.1°C81%112 mm51.8
Nov28.2°C16.2°C72%18 mm4.92
Dec28.8°C14°C59%2 mm4.82
NASA POWER long-term monthly averages for Satara (17.69, 73.99).

NVPH material list: 52 × 76 m in Satara

A 52 m wide, 76 m long naturally ventilated polyhouse (3,952 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureBig Bottom (60X2.0X8000)102 nos2,546 kg
GI structureSmall Column (76X2.0X4500)133 nos2,250 kg
GI structureGutter Purlin (42X2.0X4000)170 nos1,414 kg
GI structureGI Gutter Sheet375 mtr—
GI structureBig Arc (42X2.0X5200)114 nos1,233 kg
GI structureSide Hockey (60X2.0X5500)64 nos1,098 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)722 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)501 mtr—
Film & netsSide Insect Net (5.2 m)258 mtr—
Film & netsWhite Shade Net 50%864 mtr—
Film & netsSide Skirting Apron (1.5 m)258 mtr—
Fittings & accessoriesAluminium Profile2,592 mtr—
Fittings & accessoriesF Bracket228 nos—
Fittings & accessoriesGI Spring4,425 mtr—
Fittings & accessoriesSelf Drilling Screw5,832 nos—
Fittings & accessoriesNylon Rope 12 mm (200 m Bundle)11 nos—
Fittings & accessoriesT Joint (Tee)102 nos—
The largest items of a 52 × 76 m kit (68 items in all, about 16.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Satara

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Satara and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Satara

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Satara's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~37°C highs
Strongest sun7 kWh/m²/day
Wettest month~625 mm
Humid (75%+)June–October
Nethouse seasonNovember–February
NASA POWER monthly averages for Satara.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 625 mm, the heaviest rain of the year.

  2. 2

    June to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    April

    Peak heat, about 37°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    November to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Satara

Coloured capsicum for Satara

Coloured capsicum

NVPH

The most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic) for Satara

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Tomato for Satara

Tomato

NVPH

Indeterminate varieties trained up strings give a long harvest under cover.

Gerbera and rose for Satara

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Satara?

Satara is one of the towns where a fan and pad house can earn its running cost: dry April air lets wet pads take 37°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in SataraCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Satara

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Satara is about 40 km by road, so a dispatched load normally arrives the next day. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Satara and the rest of Satara district

Satara is one of the cooler towns in Maharashtra (124th hottest of 130), and among the wettest (17th for rain). We also supply 3 other towns in Satara district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Satara's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in April. For leafy greens through April (37°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Satara?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

How long does delivery to Satara take?

About 40 km by road from our Satara factory, so usually the next day after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Satara?

We recommend it: 5 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

NVPH materials near Satara

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom SataraHottest monthHumid monthsSuits
NVPH materials in Wai~40 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Phaltan~70 kmApr, 39°C4NVPH + fan & pad
NVPH materials in Mahad~100 kmApr, 36°C5NVPH
NVPH materials in Sasvad~100 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Uran Islampur~100 kmApr, 39°C5NVPH + fan & pad
NVPH materials in Vita~100 kmApr, 39°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Satara
  2. Kryzen: Polyhouse farming in Satara
  3. NASA POWER monthly climate averages for Satara
  4. NHB cost norms for protected cultivation
Build your kit