How it worksBuy individual items

NVPH materials · Poonch district, Jammu and Kashmir

Naturally Ventilated Polyhouse Materials Seller in Punch

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

We sell the complete NVPH material kit to growers in Punch straight from our Satara factory: the GI frame cut and drilled to drawing, 250-micron diffused film, side insect net, curtains with gear units, gutters and every fitting. Below is the live list and price, and what Punch's weather changes in it.

Hottest month
June, ~35°C
Humid (75%+)
Rarely
NVPH material, 1 acre
₹734/m²
Delivery
~7 days
Naturally ventilated polyhouse built with our material, like those we supply to Punch
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Punch?

In June the air is dry enough (49% humidity) for an NVPH to vent well, but afternoons of 35°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through June, compare with a fan and pad house below.

MeasurePunchJammu and Kashmir average (9 towns)What it means for the NVPH
Hottest-month high35°C (June)35.1°Cclose to the state average
Humidity in that month49%48%Dry air vents easily
Rain a year808 mm855 mmclose to the state average
Altitude981 m1,283 mCool nights: close curtains in the evening
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Punch
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Punch

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Punch; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor PunchWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 6.6 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepAbout 808 mm a year
Entry cabinOptionalOptionalA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Punch

We averaged two years of daily Agmarknet prices from 10 markets in nearby districts (Rajouri, Srinagar, Anantnag) for crops that are grown under cover. Cauliflower swings the most: about ₹4,233 per quintal in July against ₹1,673 in February, a 153% difference. Papaya is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Tomato10₹3,249/qDec · ₹4,420Mar · ₹2,25996%
Papaya9₹4,770/qOct · ₹4,996Apr · ₹4,38514%
Capsicum9₹4,637/qOct · ₹7,006Apr · ₹3,197119%
Cauliflower10₹3,220/qJul · ₹4,233Feb · ₹1,673153%
Cabbage10₹1,948/qNov · ₹2,794Apr · ₹1,244125%
Bottle gourd9₹2,774/qFeb · ₹3,192Apr · ₹2,05755%
Cucumber8₹3,074/qJan · ₹4,001Jun · ₹2,16385%
Okra (bhindi)7₹5,152/qDec · ₹6,809Jun · ₹3,265109%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Rajouri, Srinagar, Anantnag). ₹ per quintal (100 kg).

A planting calendar built on local prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoAug, Dec~75SeptemberMar
CapsicumOct, Nov~90JulyApr
CauliflowerJul, Aug, Sep, Oct, Nov, Dec~75AprilFeb
CabbageNov, Dec~75AugustApr
Bottle gourdFeb, Jul, Aug, Sep, Oct, Nov, Dec~55DecemberApr
CucumberJan, Sep~40NovemberJun
Okra (bhindi)Jan, Feb, Mar, Dec~45OctoberJun
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Punch

June is the hottest month, with afternoons around 26.6°C; January nights drop to about -5.3°C. July is the wettest (103 mm of 808 mm a year). The mildest growing months, with afternoons of 20–32°C and little rain, are May, Jun, Sep.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan5.3°C-5.3°C56%63 mm2.71.2
Feb6.7°C-3.5°C64%92 mm3.21.4
Mar12.5°C0.8°C61%100 mm4.51.4
Apr18°C5.6°C58%92 mm5.61.5
May23.2°C10.1°C49%56 mm6.61.5
Jun26.6°C13.7°C49%66 mm6.51.6
Jul26.4°C15.2°C65%103 mm5.51.8
Aug24.9°C14.5°C71%101 mm51.6
Sep22.9°C10.8°C63%48 mm5.21.4
Oct19.1°C5.1°C49%24 mm4.71.4
Nov13.1°C0.5°C44%32 mm3.41.2
Dec8.2°C-2.8°C47%31 mm2.81.2
NASA POWER long-term monthly averages for Punch (33.77, 74.09).

NVPH material list: 20 × 24 m in Punch

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Punch

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Punch and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Punch

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Punch's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~35°C highs
Strongest sun6.6 kWh/m²/day
Nethouse seasonApril–May
NASA POWER monthly averages for Punch.
  1. 1

    June

    Peak heat, about 35°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  2. 2

    April to May

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

  3. 3

    Winter nights

    At about 981 m, nights turn cold. Lower the curtains in the evening to hold the day's warmth.

Crops for an NVPH in Punch

Coloured capsicum for Punch

Coloured capsicum

NVPH

The most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic) for Punch

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Tomato for Punch

Tomato

NVPH

Indeterminate varieties trained up strings give a long harvest under cover.

Gerbera and rose for Punch

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Punch?

Punch is one of the towns where a fan and pad house can earn its running cost: dry June air lets wet pads take 35°C down to about 28°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~28°C inside in June
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in PunchCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board; cost norms in Jammu and Kashmir are about 15% higher.

Subsidy for a project in Punch

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Punch is about 2,280 km by road, so a dispatched load normally arrives in about 7 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Punch within Jammu and Kashmir

Punch is mid-table for heat in Jammu and Kashmir (5th of 9), and among the driest (7th for rain). These are the larger towns we supply elsewhere in Jammu and Kashmir.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Punch's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in June. For leafy greens through June (35°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Punch?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Punch take?

About 2,280 km by road from our Satara factory, so usually in about 7 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Punch

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom PunchHottest monthHumid monthsSuits
NVPH materials in Rajauri~60 kmJun, 36°C0NVPH + fan & pad
NVPH materials in Baramula~70 kmJun, 31°C0NVPH
NVPH materials in Sopore~90 kmJul, 32°C0NVPH
NVPH materials in Srinagar~100 kmJul, 32°C0NVPH
NVPH materials in Anantnag~130 kmJun, 31°C0NVPH
NVPH materials in Jammu~180 kmJun, 41°C0NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Punch
  2. Kryzen: Polyhouse farming in Punch
  3. NASA POWER monthly climate averages for Punch
  4. NHB cost norms for protected cultivation
Build your kit