How it worksBuy individual items

NVPH materials · Yavatmal district, Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Pandharkaoda

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Pandharkaoda, Yavatmal district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Pandharkaoda.

Hottest month
May, ~44°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Pandharkaoda
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Pandharkaoda?

In May the air is dry enough (26% humidity) for an NVPH to vent well, but afternoons of 44°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasurePandharkaodaMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high44°C (May)40.7°C3.3°C hotter than the state average
Humidity in that month26%35%Dry in May, but humid from July to October
Rain a year1,023 mm1,176 mm153 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Pandharkaoda
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Pandharkaoda

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Pandharkaoda; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor PandharkaodaWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 6.9 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 44°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~299 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Pandharkaoda

Prices at the mandis in nearby districts (Adilabad, Chandrapur, Jalgaon) follow a clear yearly pattern. Cauliflower is the extreme case, from ₹946 per quintal in March up to ₹4,787 in June (406% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Tomato19₹1,849/qJun · ₹3,045Mar · ₹889243%
Cauliflower15₹2,572/qJun · ₹4,787Mar · ₹946406%
Cabbage16₹1,631/qJun · ₹2,747Mar · ₹735274%
Green chilli13₹4,373/qJul · ₹5,789Dec · ₹3,36972%
Brinjal15₹2,615/qSep · ₹4,061Mar · ₹1,106267%
Okra (bhindi)15₹3,221/qJun · ₹4,714Aug · ₹2,236111%
Coriander (leaves)10₹2,785/qOct · ₹4,873Jan · ₹1,180313%
Cucumber12₹1,503/qJun · ₹1,910Mar · ₹1,10972%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Adilabad, Chandrapur, Jalgaon). ₹ per quintal (100 kg).

Timing your crop for the Pandharkaoda market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in June; at about 75 days to first harvest, transplant in March.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoJun~75MarchMar
CauliflowerJun~75MarchMar
CabbageJun, Jul~75MarchMar
Green chilliJun, Jul~75AprilDec
BrinjalJun, Sep, Oct, Nov~60JulyMar
Okra (bhindi)Jun~45AprilAug
Coriander (leaves)Oct~35AugustJan
CucumberJan, Jun, Oct~40AprilMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Pandharkaoda month by month

May is the hottest month, with afternoons around 43.9°C; December nights drop to about 12.5°C. July is the wettest (299 mm of 1,023 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan30.1°C13°C43%12 mm4.61.7
Feb34.2°C16.8°C33%8 mm5.51.8
Mar38.3°C21.3°C29%20 mm6.21.8
Apr42.3°C26.1°C24%12 mm6.92.1
May43.9°C29.4°C26%18 mm73.2
Jun36.5°C26.7°C59%177 mm5.33.4
Jul30.9°C23.8°C80%299 mm4.13.2
Aug29.5°C23.2°C86%246 mm4.12.8
Sep29.9°C22.8°C85%169 mm4.91.9
Oct29.9°C19.6°C77%50 mm5.21.5
Nov29.3°C15.5°C69%10 mm4.81.5
Dec29°C12.5°C55%2 mm4.51.5
NASA POWER long-term monthly averages for Pandharkaoda (20.02, 78.55).

NVPH material list: 20 × 24 m in Pandharkaoda

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Pandharkaoda

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Pandharkaoda and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Pandharkaoda

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Pandharkaoda's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~44°C highs
Strongest sun6.9 kWh/m²/day
Wettest month~299 mm
Humid (75%+)July–October
Nethouse seasonOctober–January
NASA POWER monthly averages for Pandharkaoda.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 299 mm, the heaviest rain of the year.

  2. 2

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 44°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to January

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Pandharkaoda

Coloured capsicum for Pandharkaoda

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 44°C.

Cucumber (parthenocarpic) for Pandharkaoda

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Pandharkaoda

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Pandharkaoda?

Pandharkaoda is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 44°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in PandharkaodaCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Pandharkaoda

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 690 km from Pandharkaoda by road. Expect the material in about 3 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Pandharkaoda and the rest of Yavatmal district

Pandharkaoda is one of the hotter towns in Maharashtra (5th of 130 we cover), and in the middle for rain (52nd). We also supply 5 other towns in Yavatmal district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Pandharkaoda's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (44°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Pandharkaoda?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

How long does delivery to Pandharkaoda take?

About 690 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Pandharkaoda?

We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

NVPH materials near Pandharkaoda

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom PandharkaodaHottest monthHumid monthsSuits
NVPH materials in Adilabad~50 kmMay, 43°C4NVPH + fan & pad
NVPH materials in Kyathampalle~50 kmMay, 43°C4NVPH + fan & pad
NVPH materials in Wani~60 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Warora~70 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Wadgaon Road~80 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Yavatmal~80 kmMay, 44°C4NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Pandharkaoda
  2. Kryzen: Polyhouse farming in Pandharkaoda
  3. NASA POWER monthly climate averages for Pandharkaoda
  4. NHB cost norms for protected cultivation
Build your kit