How it worksBuy individual items

NVPH materials · Buldhana district, Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Mehkar

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Mehkar, Buldhana district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Mehkar.

Hottest month
May, ~42°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Mehkar
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Mehkar?

In May the air is dry enough (28% humidity) for an NVPH to vent well, but afternoons of 42°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureMehkarMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high42°C (May)40.7°C1.3°C hotter than the state average
Humidity in that month28%35%Dry air vents easily
Rain a year873 mm1,176 mm303 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Mehkar
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Mehkar

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Mehkar; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor MehkarWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.3 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 42°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~235 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Mehkar

We averaged two years of daily Agmarknet prices from 12 markets in nearby districts (Nashik, Akola, Jalna, Jalana) for crops that are grown under cover. Coriander (leaves) swings the most: about ₹5,043 per quintal in October against ₹1,266 in January, a 298% difference. Cauliflower is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Tomato17₹1,327/qJun · ₹1,941Mar · ₹712173%
Methi (fenugreek leaves)9₹1,944/qJun · ₹3,207Jan · ₹944240%
Coriander (leaves)7₹2,649/qOct · ₹5,043Jan · ₹1,266298%
Cucumber14₹2,214/qDec · ₹2,990Mar · ₹1,55692%
Brinjal13₹3,433/qNov · ₹5,756Apr · ₹2,218160%
Bitter gourd11₹3,289/qJun · ₹4,796Oct · ₹1,848160%
Cabbage8₹982/qNov · ₹1,426Apr · ₹444221%
Cauliflower7₹1,288/qNov · ₹1,619Apr · ₹89880%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Nashik, Akola, Jalna, Jalana). ₹ per quintal (100 kg).

Timing your crop for the Mehkar market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in June; at about 75 days to first harvest, transplant in March.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoJun, Jul, Aug~75MarchMar
Methi (fenugreek leaves)Jun, Oct~25MayJan
Coriander (leaves)Oct~35AugustJan
CucumberJun, Dec~40OctoberMar
BrinjalNov, Dec~60SeptemberApr
Bitter gourdJan, Jun~55AprilOct
CabbageJun, Nov~75AugustApr
CauliflowerJun, Jul, Nov~75AugustApr
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Mehkar

May is the hottest month, with afternoons around 42°C; January nights drop to about 12.6°C. July is the wettest (235 mm of 873 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.4°C12.6°C39%7 mm4.71.8
Feb33.3°C16.1°C30%5 mm5.62
Mar37°C20°C26%17 mm6.42
Apr40.8°C24.4°C22%8 mm72.4
May42°C27.1°C28%14 mm7.23.8
Jun35°C24.8°C60%155 mm5.53.9
Jul30.4°C22.6°C78%235 mm4.23.8
Aug29°C21.9°C84%202 mm4.13.3
Sep29.2°C21.4°C83%162 mm4.82.2
Oct29.3°C18.7°C74%51 mm5.21.6
Nov28.8°C15.3°C64%14 mm4.71.6
Dec28.6°C12.7°C49%3 mm4.41.6
NASA POWER long-term monthly averages for Mehkar (20.15, 76.57).

NVPH material list: 20 × 24 m in Mehkar

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Mehkar

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Mehkar and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Mehkar

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Mehkar's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~42°C highs
Strongest sun7.3 kWh/m²/day
Wettest month~235 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Mehkar.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 235 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 42°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Mehkar

Coloured capsicum for Mehkar

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 42°C.

Cucumber (parthenocarpic) for Mehkar

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Mehkar

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Mehkar?

Mehkar is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 42°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in MehkarCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Mehkar

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Mehkar is about 480 km by road, so a dispatched load normally arrives in about 3 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Mehkar and the rest of Buldhana district

Mehkar is mid-table for heat in Maharashtra (47th of 130), and in the middle for rain (77th). We also supply 4 other towns in Buldhana district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Mehkar's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (42°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Mehkar?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Mehkar take?

About 480 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Mehkar?

We recommend it: 3 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

NVPH materials near Mehkar

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom MehkarHottest monthHumid monthsSuits
NVPH materials in Lonar~20 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Risod~40 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Patur~70 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Washim~80 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Partur~90 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Shegaon~90 kmMay, 43°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Mehkar
  2. Kryzen: Polyhouse farming in Mehkar
  3. NASA POWER monthly climate averages for Mehkar
  4. NHB cost norms for protected cultivation
Build your kit