NVPH materials · Lucknow district, Uttar Pradesh
Naturally ventilated polyhouse material for Lucknow farmers
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
A naturally ventilated polyhouse can work in Lucknow for much of the year, but its May heat, July rain and August–September humidity need active curtain, shade and gutter management. For crops that need close summer temperature control, fan and pad cooling is the stronger option; for capsicum, cucumber, tomato and flowers with sensible seasonal planning, an NVPH is a practical lower-running-cost structure.
- Hottest month
- May, ~43°C
- Humid (75%+)
- 2 months
- NVPH material, 1 acre
- ₹734/m²
- Delivery
- ~5 days

What Lucknow weather means inside an NVPH
Lucknow has a sharply changing protected-cultivation climate. January nights average 7.1°C, then the afternoon high rises to 33.9°C in March, 40.3°C in April and 43.1°C in May. May also has the strongest sun, at 6.7 kWh/m²/day. Natural ventilation can move heat out through roof vents and side curtains, but it cannot deliver the tightly controlled summer temperature of a fan and pad house.
The pre-monsoon months are dry: relative humidity is 22% in April and 24% in May. This helps venting because the air is dry, though plants still need protection from direct heat. Rain builds in June, reaches 283 mm in July, then humidity becomes the main issue. August averages 81% humidity and September 78%, with 235 mm and 155 mm rain respectively. During these wet months, airflow and disease prevention matter more than simply keeping the house closed.
October becomes more manageable at a 31.2°C average high, while November to February brings milder days and cool nights. February and March are identified as the local nethouse season. Annual rain is 916 mm, close to the Uttar Pradesh average of 912 mm, so the house should be prepared for a normal but concentrated monsoon rather than treated as a dry-climate design.
- January–February: cool nights; protect the crop from unnecessary night exposure and use daytime light well.
- March–May: maximum side opening and roof-vent airflow are essential; May needs shade over the crop.
- June–July: rain protection, working gutters and timely curtain operation become critical.
- August–September: humidity is 75% or more; keep ventilation available whenever rain permits.
- October–December: conditions ease, but December nights still average 8.6°C.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 22.3°C | 7.1°C | 48% | 19 mm | 3.1 | 1.7 |
| Feb | 27°C | 10.7°C | 42% | 19 mm | 4.5 | 1.9 |
| Mar | 33.9°C | 16.3°C | 31% | 12 mm | 5.9 | 2.1 |
| Apr | 40.3°C | 23.2°C | 22% | 10 mm | 6.6 | 2.3 |
| May | 43.1°C | 28.1°C | 24% | 27 mm | 6.7 | 2.4 |
| Jun | 41.4°C | 30°C | 40% | 116 mm | 5.9 | 2.7 |
| Jul | 34.7°C | 27.3°C | 72% | 283 mm | 4.8 | 2.5 |
| Aug | 32.8°C | 25.9°C | 81% | 235 mm | 4.8 | 2 |
| Sep | 32.2°C | 24°C | 78% | 155 mm | 4.8 | 1.8 |
| Oct | 31.2°C | 19.1°C | 64% | 29 mm | 4.7 | 1.3 |
| Nov | 27.3°C | 13.3°C | 54% | 4 mm | 3.7 | 1.4 |
| Dec | 23.1°C | 8.6°C | 50% | 7 mm | 3 | 1.5 |
Run curtains, roof vents and shade by season
Do not use fixed curtain settings through the year. In February and March, open the house for maximum light, plan the main planting and complete structural maintenance. This is the dry, mild period, with February at 27°C and March at 33.9°C average afternoon high. Check the film, net and moving curtain arrangement before the severe heat arrives.
In April and May, roll side curtains fully up to admit the largest possible volume of air, and leave the roof vent functioning as the warm-air outlet. Use the shade arrangement over the crop during the 43°C May period. Irrigate early in the day, as specified in the seasonal guide, rather than relying on a closed house to protect plants from heat. A closed NVPH in this period will not substitute for cooling.
Before July, clear gutters and funnels, inspect the polyfilm for tears, and tighten GI springs. When it rains, operate the curtains to prevent rain entry while restoring ventilation as soon as conditions permit. In August and September, keep side curtains open whenever it is not raining and space plants a little wider to reduce fungal disease pressure. These are the months where leaving an NVPH shut for long periods can be particularly costly in crop health terms.
In October, gradually reduce unnecessary exposure as nights cool. November, December and January call for attention to the cool night conditions, while daytime light remains useful. The calendar below gives the weather triggers and the corresponding annual jobs.
- May: fully raised curtains, active roof vent, shade layer closed over the crop.
- Before July: clean drainage components and check film tension.
- August–September: prioritise air exchange whenever rain is not entering.
- February–March: plan planting and carry out maintenance.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~43°C highs | ||||||||||||
| Strongest sun | 6.7 kWh/m²/day | ||||||||||||
| Wettest month | ~283 mm | ||||||||||||
| Humid (75%+) | August–September | ||||||||||||
| Nethouse season | February–March |
- 1
Before July
Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 283 mm, the heaviest rain of the year.
- 2
August to September
Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.
- 3
May
Peak heat, about 43°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.
- 4
February to March
The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.
Material specification and upgrades suited to Lucknow
The base NVPH needs a roof vent, side curtains, side insect net, GI structure, white diffused polyfilm, gutters and fittings. For Lucknow, retain the 250-micron white diffused, UV-stabilised roof film. It spreads the strong May sunlight more evenly. Keep the GI gutter sheet and funnels, because July alone receives about 283 mm of rain. FRP doors are also retained for this climate.
The most relevant heat upgrade is aluminium reflective shade net in place of the standard white 50% shade net. It reflects heat back out during the 43°C May conditions. Add a second net layer that can be opened or closed seasonally with ropes and pulleys. This is useful because the structure faces very different requirements between the hot, dry April–May stretch and the humid monsoon.
Keep the roof vent plus side curtains: the recommended configuration says natural airflow is enough for the NVPH use case here. A double-door entry cabin remains optional, but can help keep whitefly and thrips out as people enter. It is not a replacement for careful crop hygiene or correct curtain operation.
Polyhouse Constructions supplies ISI-marked GI pipe made from branded Tata, Jindal and JSW steel. The GI structure carries a 15-year manufacturing warranty, polyfilm 2.5 years and nets 3 years. Each dispatch includes lab test certificates and a technical data sheet, with in-house engineering, manufacturing and a 32-point QA process.
- Keep: 250-micron white diffused polyfilm, roof vent, curtains, GI gutters and FRP doors.
- Change: use aluminium shade net for peak heat.
- Add: a seasonally operated second net layer.
- Optional: double-door entry cabin for insect exclusion at entry.
| Part | Standard kit | For Lucknow | Why |
|---|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Keep | Spreads May's 6.7 kWh/m²/day of sunlight evenly |
| Shade net | White 50% | Aluminium Shade Net (4 m) | Reflects heat back out at 43°C |
| Second net layer | None | Add (double layer) | Open or close it by the season with ropes and pulleys |
| Air circulation | Roof vent + curtains | Keep | Natural airflow is enough |
| Doors | FRP (fibre) doors | Keep FRP | FRP lasts well in this climate |
| Gutters | GI gutter sheet + funnels | Keep | July brings ~283 mm; clean before June |
| Entry cabin | Optional | Optional | A double door keeps whitefly and thrips out when people walk in |
Current NVPH material price and what is included
The live weekly material rate is useful for comparing sizes, but it is not a complete installed-project figure. This week, a 20 × 24 m NVPH covering 480 m² is ₹4,68,814 including GST, or ₹977/m². A 28 × 36 m, 1,008 m² house is ₹8,59,963 including GST, or ₹853/m². A 52 × 76 m house of 3,952 m² is ₹28,99,897 including GST, or ₹734/m².
These are ex-factory material prices; freight to Lucknow and erection are extra. The lower per-m² rate at larger size comes from sharing gutters, end frames and doors over more growing area. Rates follow weekly GI and plastic prices and are updated every Friday. A booking requires 5% advance and 95% before dispatch. A 5% bulk discount applies on 10 or more units of an item.
Polyhouse Constructions manufactures and supplies kits from its Degaon factory on the Pune–Bangalore Highway at Wai, Satara, Maharashtra; it does not have an office in Lucknow. Delivery is listed as 5 days after dispatch. If erection is required, construction is done by Kryzen Biotech’s construction team.
- Small: 480 m² — ₹4,68,814 material including GST.
- Medium: 1,008 m² — ₹8,59,963 material including GST.
- About 1 acre: 3,952 m² — ₹28,99,897 material including GST.
- Freight to Lucknow and erection are additional.
| Size | Span × bay | Area | Material incl. GST | Per m² |
|---|---|---|---|---|
| Small | 20 × 24 m | 480 m² | ₹4,68,814 | ₹977 |
| Medium | 28 × 36 m | 1,008 m² | ₹8,59,963 | ₹853 |
| About 1 acre | 52 × 76 m | 3,952 m² | ₹28,99,897 | ₹734 |
Price your own size for Lucknow
Choose span and bay and get the full list with quantities, weights and rates in a minute.
The live kit list: check every component before ordering
A complete kit is more than a frame and roof film. For the 28 × 36 m example, the largest listed items include small columns, side hockey pipes, big bottom pipes, big arcs and 70 m of GI gutter sheet. The kit also contains 255 m of 4.5 m white diffused 250-micron polyfilm, 138 m of 5.5 m film, 130 m of side insect net, 130 m of side skirting apron and 192 m of white 50% shade net in the standard configuration.
Fittings are a substantial part of an accurately specified house: the example shows 836 m of aluminium profile, 1,425 m of GI spring, 54 F brackets, 358 half clamps and 1,881 self-drilling screws. There are 67 items in all and about 4.8 tonnes of steel and fittings for that size. For Lucknow, specify the aluminium shade-net and second-layer changes discussed above rather than assuming the standard net arrangement is final.
The online kit builder shows every line, quantity, weight and current rate for the selected size. That is the list to use for checking whether structure, film, insect net, curtain-related material, drainage parts and fittings are all included before booking.
- Example kit size: 28 × 36 m, with 67 items in total.
- Structure and drainage: columns, arcs, pipes and GI gutter sheet.
- Crop enclosure: 250-micron diffused film, side insect net and skirting apron.
- Fixing system: aluminium profiles, GI springs, brackets, clamps and screws.
| Group | Item | Quantity | Weight |
|---|---|---|---|
| GI structure | Small Column (76X2.0X4500) | 36 nos | 609 kg |
| GI structure | Side Hockey (60X2.0X5500) | 32 nos | 549 kg |
| GI structure | Big Bottom (60X2.0X8000) | 21 nos | 524 kg |
| GI structure | Big Arc (42X2.0X5200) | 27 nos | 292 kg |
| GI structure | GI Gutter Sheet | 70 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (4.5 m) | 255 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (5.5 m) | 138 mtr | — |
| Film & nets | Side Insect Net (5.2 m) | 130 mtr | — |
| Film & nets | Side Skirting Apron (1.5 m) | 130 mtr | — |
| Film & nets | White Shade Net 50% | 192 mtr | — |
| Fittings & accessories | Aluminium Profile | 836 mtr | — |
| Fittings & accessories | GI Spring | 1,425 mtr | — |
| Fittings & accessories | F Bracket | 54 nos | — |
| Fittings & accessories | Clamps 60 mm Half | 358 nos | — |
| Fittings & accessories | Self Drilling Screw | 1,881 nos | — |
Choose crops around Lucknow mandi price seasons
Crop choice should combine whether the crop can be managed in an NVPH during its growing period with actual price timing at Lucknow district markets. The mandi table uses the last two years of Agmarknet daily prices from Lucknow APMC, Banthara APMC and Lucknow, expressed in ₹ per quintal. It is a market signal, not a promised sale price.
Capsicum is a strong crop to assess for an NVPH: its average modal price is ₹4,044/q across three markets, with the recorded high of ₹6,098/q in October and low of ₹2,726/q in May. This suits planning harvests toward the less extreme post-monsoon period, while using shade net during May heat. Green chilli has an average of ₹3,292/q and its recorded high is ₹4,979/q in August, but August humidity requires close disease and ventilation management.
Tomato averages ₹1,975/q, with a recorded August high of ₹3,428/q and February low of ₹858/q. Cucumber averages ₹1,914/q and has its high in January at ₹2,280/q, compared with ₹1,195/q in May; its fast 3–4 month crop cycle can help fit it into the cooler-to-warming window. Brinjal averages ₹1,661/q and peaks in November at ₹1,911/q. Use these figures to compare planting dates, expected harvest months and your own buyer arrangement rather than choosing only by the annual average.
- Capsicum: ₹4,044/q average; highest recorded price in October.
- Green chilli: ₹3,292/q average; highest recorded price in August.
- Tomato: ₹1,975/q average; recorded high in August.
- Cucumber: ₹1,914/q average; recorded high in January.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Tomato | 3 | ₹1,975/q | Aug (₹3,428) | Feb (₹858) |
| Green chilli | 3 | ₹3,292/q | Aug (₹4,979) | Feb (₹2,634) |
| Capsicum | 3 | ₹4,044/q | Oct (₹6,098) | May (₹2,726) |
| Brinjal | 2 | ₹1,661/q | Nov (₹1,911) | Apr (₹1,340) |
| Bitter gourd | 2 | ₹2,382/q | Apr (₹2,641) | Jun (₹1,790) |
| Bottle gourd | 2 | ₹1,496/q | Dec (₹1,898) | May (₹1,045) |
| Papaya | 2 | ₹2,743/q | Nov (₹3,064) | Oct (₹2,460) |
| Cucumber | 2 | ₹1,914/q | Jan (₹2,280) | May (₹1,195) |
| Cauliflower | 2 | ₹1,590/q | Oct (₹2,631) | Feb (₹862) |
| Cabbage | 2 | ₹1,474/q | Oct (₹2,280) | Feb (₹865) |
When an NVPH is enough—and when fan and pad is better
An NVPH cools through roof vents and side curtains and has no cooling power cost. That is a meaningful advantage for crops and planting windows that can tolerate the seasonal inside conditions. Its recommended use in Lucknow includes capsicum, cucumber, tomato and flowers. The material rate shown for an about-one-acre NVPH is ₹28,99,897, or ₹734/m².
However, May’s 43.1°C average high is the decision point. Fan and pad cooling uses exhaust fans and wet pads and is listed at about 31°C inside in May. It is better suited to leafy greens and crops needing tight control in summer, but it requires electricity for fans and a pump. The listed material price for a one-acre fan and pad house is ₹32,48,775, or ₹822/m².
Choose NVPH where ventilation, shade and crop calendar are sufficient and where avoiding cooling electricity supports the business plan. Choose fan and pad if dependable summer cooling is central to the crop plan. Do not select only on initial material price: May performance and running requirements should decide the structure type.
- NVPH: roof vent and curtains; no cooling power cost.
- Fan and pad: about 31°C inside in May, with fans and pump.
- One-acre material price: ₹28,99,897 for NVPH and ₹32,48,775 for fan and pad.
| Naturally ventilated | Fan & pad | |
|---|---|---|
| Cooling | Roof vent and side curtains (no power) | Exhaust fans and wet pads, ~31°C inside in May |
| Running cost | None for cooling | Electricity for fans and a pump |
| Material price, 1 acre | ₹28,99,897 (₹734/m²) | ₹32,48,775 (₹822/m²) |
| Suits in Lucknow | Capsicum, cucumber, tomato, flowers | Leafy greens and crops needing tight control in summer |
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Can a naturally ventilated polyhouse handle Lucknow’s May heat?
It can ventilate and shade crops, but May averages a 43.1°C afternoon high and has the strongest sun. Keep side curtains fully raised, use the roof vent and aluminium shade net with a second seasonal layer; choose fan and pad if the crop needs tight summer temperature control.
What should I do in Lucknow’s monsoon months?
Clear gutters and funnels before July, inspect the film for tears and tighten GI springs. July averages 283 mm rain, while August and September are highly humid, so restore side ventilation whenever rain is not entering.
Which crops should I evaluate first in a Lucknow NVPH?
Capsicum, cucumber, tomato and flowers are the listed NVPH options. In Lucknow district mandi data, capsicum averages ₹4,044/q and recorded its high of ₹6,098/q in October; cucumber averages ₹1,914/q and recorded its high in January.
What is the current material-only cost for an NVPH in Lucknow?
This week, listed material including GST is ₹4,68,814 for 480 m², ₹8,59,963 for 1,008 m² and ₹28,99,897 for 3,952 m². These are ex-factory rates; freight to Lucknow and erection are extra.
Who supplies and erects the polyhouse in Lucknow?
Polyhouse Constructions, a venture of Kryzen Biotech Pvt Ltd, manufactures and supplies the material from its Satara factory; there is no Lucknow office. If erection is required, it is done by Kryzen Biotech’s construction team, and delivery is listed as 5 days after dispatch.
NVPH materials near Lucknow
Neighbouring towns on the same delivery route, and how their summers compare.
| Town | From Lucknow | Hottest month | Humid months | Suits |
|---|---|---|---|---|
| NVPH materials in Nawabganj | ~40 km | May, 43°C | 2 | NVPH + fan & pad |
| NVPH materials in Zaidpur | ~50 km | May, 43°C | 2 | NVPH + fan & pad |
| NVPH materials in Purwa | ~60 km | May, 43°C | 2 | NVPH + fan & pad |
| NVPH materials in Sandila | ~60 km | May, 43°C | 2 | NVPH + fan & pad |
| NVPH materials in Unnao | ~70 km | May, 43°C | 2 | NVPH + fan & pad |
| NVPH materials in Safipur | ~80 km | May, 43°C | 2 | NVPH + fan & pad |
