How it worksBuy individual items

NVPH materials · Purulia district, West Bengal

Naturally Ventilated Polyhouse Materials Seller in Adra

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Adra, Purulia district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Adra.

Hottest month
May, ~39°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~6 days
Naturally ventilated polyhouse built with our material, like those we supply to Adra
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Adra?

In May the air is dry enough (54% humidity) for an NVPH to vent well, but afternoons of 39°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureAdraWest Bengal average (58 towns)What it means for the NVPH
Hottest-month high39°C (May)37.7°C1.3°C hotter than the state average
Humidity in that month54%53%Dry in May, but humid from July to October
Rain a year1,405 mm1,531 mm126 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Adra
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Adra

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Adra; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor AdraWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 6.3 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~327 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Adra

Prices at the mandis in Purulia district follow a clear yearly pattern. Okra (bhindi) is the extreme case, from ₹1,393 per quintal in May up to ₹6,114 in February (339% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Brinjal6₹2,708/qAug · ₹3,874Mar · ₹1,492160%
Okra (bhindi)4₹3,769/qFeb · ₹6,114May · ₹1,393339%
Tomato4₹2,461/qNov · ₹3,643Mar · ₹1,136221%
Ridge gourd3₹4,360/qFeb · ₹6,905May · ₹2,382190%
Cabbage2₹2,082/qNov · ₹2,900Mar · ₹1,421104%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Purulia district. ₹ per quintal (100 kg).

Timing your crop for the Adra market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, brinjal peaks in August; at about 60 days to first harvest, transplant in June.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
BrinjalJul, Aug, Sep, Oct~60JuneMar
Okra (bhindi)Jan, Feb~45DecemberMay
TomatoNov, Dec~75AugustMar
Ridge gourdJan, Feb~50DecemberMay
CabbageSep, Nov~75AugustMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Adra month by month

May is the hottest month, with afternoons around 39.3°C; January nights drop to about 9.1°C. July is the wettest (327 mm of 1,405 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan23.3°C9.1°C62%12 mm3.81.6
Feb28.2°C13°C54%14 mm4.81.6
Mar34.2°C18.2°C44%22 mm5.71.7
Apr39.2°C23.3°C44%47 mm6.31.9
May39.3°C25.9°C54%118 mm6.12.3
Jun35.5°C26.5°C70%220 mm5.22.6
Jul31.8°C25.4°C84%327 mm4.42.6
Aug30.9°C25°C87%292 mm4.52.2
Sep30.2°C24.2°C88%237 mm4.51.8
Oct29.2°C20.8°C81%99 mm4.51.4
Nov26.5°C15.1°C74%9 mm4.11.3
Dec23.2°C10.3°C70%8 mm3.51.4
NASA POWER long-term monthly averages for Adra (23.50, 86.68).

NVPH material list: 28 × 36 m in Adra

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Adra

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Adra and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Adra

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Adra's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~39°C highs
Strongest sun6.3 kWh/m²/day
Wettest month~327 mm
Humid (75%+)July–October
NASA POWER monthly averages for Adra.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 327 mm, the heaviest rain of the year.

  2. 2

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 39°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

Crops for an NVPH in Adra

Coloured capsicum for Adra

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 39°C.

Cucumber (parthenocarpic) for Adra

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Adra

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Adra?

Adra is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 39°C down to about 33°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~33°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in AdraCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Adra

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Adra is about 1,900 km by road, so a dispatched load normally arrives in about 6 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Adra and the rest of Purulia district

Adra is one of the hotter towns in West Bengal (3rd of 58 we cover), and in the middle for rain (42nd). We also supply 2 other towns in Purulia district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Adra's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (39°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Adra?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Adra take?

About 1,900 km by road from our Satara factory, so usually in about 6 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Adra?

We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

NVPH materials near Adra

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom AdraHottest monthHumid monthsSuits
NVPH materials in Raghunathpur~10 kmMay, 39°C4NVPH + fan & pad
NVPH materials in Chirkunda~40 kmApr, 39°C4NVPH + fan & pad
NVPH materials in Dhanbad~50 kmMay, 40°C4NVPH + fan & pad
NVPH materials in Asansol~50 kmMay, 39°C4NVPH + fan & pad
NVPH materials in Purulia~50 kmMay, 40°C4NVPH + fan & pad
NVPH materials in Bankura~60 kmApr, 39°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Adra
  2. Kryzen: Polyhouse farming in Adra
  3. NASA POWER monthly climate averages for Adra
  4. NHB cost norms for protected cultivation
Build your kit