हे कसे काम करतेवेगळे साहित्य खरेदी करा

Healthy Seedlings for Polyhouse: A Pre-Entry Checklist

Polyhouse Constructions Agronomy Desk · १२ नोव्हें, २०२६

Bringing in weak or infested plants is one of the quickest ways to start a polyhouse crop with a problem. Healthy seedlings for polyhouse should be uniform, well rooted, free from visible pests and disease, and hardened to the conditions they will face after transplanting.

Do not inspect only a few plants from the top of a tray. Check a representative sample from every batch, including tray corners and the lower leaf surface. If you find a serious pest, virus-like symptom or root problem, keep that lot outside the production area until it is identified.

Why seedling inspection matters in protected cultivation

A polyhouse offers a favourable environment for crop growth, but it can also favour rapid pest and disease build-up. Once whiteflies, thrips, mites, damping-off pathogens or a virus enter, they can move through a closely spaced crop quickly. Replacing a few doubtful trays before planting is much easier than managing a crop-wide issue later.

Seedlings are especially risky when they come from a different nursery, village or growing system. They may look green from a distance while carrying eggs under leaves, early root decay, or mild viral symptoms that become obvious only after transplanting stress.

Inspect seedlings at delivery or collection, before they cross the polyhouse entrance. Keep a simple record: supplier, crop and variety, sowing date, tray size, quantity, inspection result and action taken. This makes later diagnosis much easier.

The 10-minute receiving check for every tray lot

Use this check at the gate or nursery holding area. Inspect at least 2 to 5% of trays from a uniform lot. For small lots, inspect more trays rather than relying on one sample. Pull plants from different positions: centre, edges, front and back of each selected tray.

Quick acceptance checklist

Do this before unloading trays into the crop area. Workers should avoid handling doubtful material and then touching healthy plants without cleaning hands and tools.

Inspect leaves and stems for hidden insect pests

Many nursery pests hide where a quick top-view inspection will miss them. Turn over leaves, especially the newest leaves and plants near tray edges. In hot, dry periods, mites and thrips can build up rapidly. During humid or rainy weather, soft rots and fungal problems deserve extra attention.

What to look for

What it may indicate

Immediate decision

White, winged insects flying when plants are disturbed; eggs or nymphs under leaves

Whitefly infestation

Hold the lot outside; inspect more plants and discuss with the nursery

Silvery streaks, scarred leaves, tiny dark droppings in buds or folds

Thrips feeding

Quarantine the lot; do not mix it with clean seedlings

Fine stippling, bronzing or delicate webbing

Spider mites

Reject heavily affected trays; isolate and inspect surrounding lots

Curled, puckered growing points with clusters of soft insects

Aphids

Hold and assess the level of infestation before entry

Serpentine tunnels within leaves

Leaf miner larvae

Remove affected material from the lot and assess how widespread it is

Shiny sticky deposits or black soot-like growth

Honeydew from sap-sucking pests

Search the undersides of leaves for whiteflies, aphids or mealybugs

A few insects on one plant still matter. Sap-sucking pests can bring viruses, and small pests multiply quickly in a protected structure. For whitefly-specific prevention after planting, see this guide to whitefly control in polyhouses. If thrips are common in your area or crop, use a separate holding zone and follow a planned scouting routine rather than waiting for visible damage.

Do not assume an insecticide spray at the nursery makes the seedlings safe. It may miss eggs, pests hidden in buds, or pests with resistance. Ask the nursery what crop-protection measures were used and keep that information in your record. Any treatment must follow the product label and advice from your KVK or crop agronomist.

Check the root plug before you accept the lot

A green top does not always mean a healthy root system. Pull out a few plants with the plug intact. Choose plugs from healthy-looking plants as well as from smaller or yellow plants.

Healthy roots are usually white to cream coloured, firm and spread through the plug without forming a tight coil. The plug should hold together when removed, yet it should not be so dry that media falls away from roots. Roots vary by crop, substrate, seedling age and nursery practice, so judge the full lot rather than one plug alone.

Root warning signs

Reject or hold a lot for assessment when you see any of the following:

  • Brown, black, slimy or easily broken roots.
  • A sour, rotten smell from the media.
  • Very wet, heavy plugs with little air space.
  • Roots that are scarce, short or restricted to the upper plug.
  • Severe root spiralling or a dense root mat in over-aged seedlings.
  • Distinct galls, swellings or knots on roots.
  • A sharp contrast between healthy and dead patches in the same tray.

Root galls can be associated with root-knot nematodes, while dark and decaying roots can result from poor drainage, overwatering or root pathogens. A nursery cannot always diagnose the cause visually. Do not plant questionable plugs into clean beds or cocopeat grow bags just because the foliage is still green.

Also match the plug condition to your transplanting schedule. Under-sized plugs dry rapidly after planting. Overgrown plugs can suffer more transplant shock and may establish unevenly. If planting must be delayed, keep accepted seedlings in a clean, protected holding area with appropriate light, ventilation and watering—not on bare soil beside the polyhouse.

Identify damping-off, bacterial problems and other disease signs

Disease symptoms in trays often occur in patches. Walk through the entire lot and look for groups of collapsed plants, not only individual weak seedlings. Mark affected trays so they are not accidentally carried inside.

Damping-off may appear as seedlings that fall over, a narrow water-soaked or dark section at the stem base, or gaps where seedlings have already died. It is common where the media stays wet for long periods and airflow is poor. Learn the early signs and prevention steps in this guide to damping-off in nursery trays and beds.

Other warning signs include water-soaked spots, dark stem streaks, soft tissue, leaf spots that spread rapidly, and bacterial ooze from a cut stem in some cases. These signs can have different causes. Do not make a treatment decision from a photo or one symptom alone; isolate the lot and seek diagnosis from a qualified agronomist, nursery expert or KVK.

Avoid placing trays directly on soil, compost heaps or standing water during inspection. Soil splash and dirty footwear can contaminate a clean nursery lot. Use clean tables, racks or plastic sheets that can be washed.

Separate virus-like symptoms from ordinary nutrient stress

Viruses are a major reason to reject suspect seedlings before entry. There is no curative treatment for a virus-infected plant, and insects such as whiteflies, aphids and thrips can spread certain viruses from infected plants to healthy ones.

Look for uneven mosaic patterns of light and dark green, strong leaf curling, vein clearing, puckering, shoestring-like narrow leaves, ring spots, abnormal bunching at the top, or marked stunting beside normal plants of the same age. In tomato, curling and reduced leaf size can be particularly concerning. In cucumber and other cucurbits, mosaic and distorted young leaves need careful attention.

However, not every yellow or curled leaf is a virus. Excess water, poor roots, cold handling, high salts, nutrient shortage or herbicide drift can also cause distortion. The key clue is pattern: virus-like plants are often irregularly distributed and show distorted new growth, while a nutritional issue may appear more uniformly across a tray or lot.

Use this decision rule:

  1. One doubtful plant: Tag it, remove it from the batch, and inspect nearby seedlings closely.
  2. Several plants with the same virus-like pattern: Quarantine the full tray lot and contact the supplier or an expert for diagnosis.
  3. Symptoms across many trays: Do not plant the consignment until the cause is clear.
  4. Confirmed or strongly suspected virus: Reject the affected lot or dispose of affected plants safely. Do not compost them near the structure.

For a more detailed symptom guide, read how to identify viral disease symptoms in polyhouse crops. Keeping virus sources out is more reliable than trying to contain them after planting.

Confirm seedling age, uniformity and transplant readiness

A clean seedling can still perform poorly if it is too young, stretched or not hardened. The correct age differs widely by crop, variety, season, plug size and whether the plant is grafted. Use the nursery’s expected stage and inspect the plant rather than depending only on days after sowing.

Ready-to-transplant seedlings normally have a sturdy stem, enough true leaves for their crop stage, a firm plug and active white roots. They should stand upright without excessive elongation. Avoid plants that are tall and thin, leaning strongly toward light, or carrying flowers too early unless this is specifically normal for the crop and production plan.

Before transplanting, ask these practical questions:

  • Are all trays from the same sowing batch and variety?
  • Has the nursery hardened plants to outside light and lower humidity?
  • Can the roots hold the plug without breaking?
  • Does the seedling size suit the planned bed spacing and planting date?
  • Are graft unions, where used, healthy and clearly above the future planting depth?

Uniform seedlings establish together, simplify irrigation scheduling and make crop training easier. A mixed lot of small, normal and overgrown plants often gives uneven flowering and harvesting.

Quarantine and move accepted seedlings safely

Even accepted seedlings benefit from a short observation period when practical, especially if they arrive from an outside nursery. A separate covered holding area is useful. It should be clean, away from the main crop, and protected from insects as far as possible.

Pre-entry biosecurity steps

  1. Keep cartons and used tray covers outside the production zone. They may carry soil, insects or plant debris.
  2. Place trays on clean raised racks, never directly on the ground.
  3. Inspect the lot again after 24 to 48 hours if planting time permits. Hidden pests may become easier to see.
  4. Use separate tools and gloves for the holding area, or clean them before moving to the crop.
  5. Put up suitable sticky traps in the holding area to help detect winged pests; traps monitor pests but do not replace plant inspection.
  6. Bring only accepted trays through a clean entry route. Repair gaps and keep entry doors closed to reduce fresh pest entry.
  7. Transplant healthy plants first. Handle doubtful material last, or preferably on another day.

A proper seedling quarantine process for protected cultivation is particularly useful when you buy seedlings from multiple suppliers. After planting, continue weekly crop checks from the first week, because low-level pest or disease problems can still appear later.

Next steps

Print this checklist and use it at every seedling delivery, regardless of whether the plants come from a trusted nursery. Record rejected lots and the reason for rejection so that suppliers can improve future batches.

Before planting, also check that insect nets, doors, irrigation lines, beds or grow bags and drainage are ready. Structure design affects pest exclusion as well: understand the role of side insect net in a protected structure and inspect it for tears or open edges. If you are planning a new naturally ventilated structure, you can review components and current item quantities through the polyhouse kit builder.

Frequently asked questions

How many seedlings should I inspect before accepting a nursery lot?

Inspect at least 2 to 5% of trays from a uniform lot, taking plants from tray centres and edges. For a small consignment or an unfamiliar supplier, inspect a larger share because one tray may not represent the full batch.

Can I transplant seedlings with a few whiteflies if I spray them first?

It is safer to hold the lot outside the polyhouse and assess how widespread the infestation is. Whiteflies and their eggs can be hidden under leaves, and they may introduce or spread virus risks after plants enter.

Are brown roots always a sign that seedlings must be rejected?

A few older roots may darken naturally, but widespread brown, soft, slimy or foul-smelling roots are warning signs. Compare several plugs and seek expert advice if the root problem is common across the lot.

How long should seedlings stay in quarantine before polyhouse planting?

If the planting schedule allows, observe them for 24 to 48 hours in a clean separate area. This short period can reveal mobile pests or symptoms that were not obvious during delivery inspection.

What should I do with seedlings suspected to have a virus?

Keep them away from healthy trays and avoid moving them through the crop area. Ask for diagnosis where possible; if virus is confirmed or strongly suspected, do not plant them and dispose of them safely away from the polyhouse.

तुमचा किट बनवा