यह कैसे काम करता हैअलग सामग्री खरीदें

Lisianthus Polyhouse Crop Calendar India: Plug to Harvest

Polyhouse Constructions Agronomy Desk · 12 नव॰ 2026

Lisianthus (Eustoma) is best planned as a cool-season polyhouse crop in much of India. For an autumn plug planting, expect first commercial cutting roughly 16–24 weeks later, then repeated harvests for several weeks. Exact timing changes with variety, plug age, temperature, light and local altitude.

For plains, September to November transplanting is usually the safer production window where the polyhouse can prevent extreme heat. In cooler hill regions, growers may plan a longer season. The key is to avoid heat stress during early establishment and very low temperatures that can cause rosetting, where plants stay short and do not form marketable stems.

Crop duration at a glance

Lisianthus is not a quick turnover flower. Before ordering plugs, match your proposed planting date with your likely harvest market: weddings, events, florist demand and wholesale flower markets. Build in a buffer because a cloudy winter or a temperature problem can delay flowering.

Crop stage

Typical timing after transplanting

Main objective

What the grower should watch

Plug arrival and transplant

Week 0

Root establishment

Plug quality, moist root zone, gentle climate

Establishment

Weeks 1–3

Active rooting and uniform stand

Drainage, missing plants, early pests

Vegetative growth

Weeks 4–8

Strong stem and leaf framework

Temperature, nutrition balance, stem support

Stem extension and branching

Weeks 9–13

Long, straight flowering stems

Spacing, support net, humidity and airflow

Bud initiation and development

Weeks 14–18

Uniform buds and quality

Thrips, botrytis risk, irrigation balance

First harvest

Weeks 16–24

Saleable cut stems

Stage of cut, grading, cold handling

Peak and final harvests

Weeks 20–30 or later

Recover successive flushes

Labour, harvest frequency, market planning

Crop removal and reset

After final harvest

Break pest and disease cycle

Residue removal, sanitation, soil testing

The range is intentionally broad. A fast variety under suitable conditions may reach harvest earlier. A winter-planted crop in a cold location, or a crop affected by early heat, may take longer and yield shorter stems.

Select the planting window before you order plugs

A plug is a young rooted transplant, normally supplied by a specialist nursery. Do not plan a commercial lisianthus crop around ordinary seedling production unless you have the nursery skill and climate control to produce uniform plugs. Lisianthus seed is tiny, germination and early growth are slow, and uneven transplants lead to uneven harvests.

Practical windows for Indian conditions

In many warm plains, transplanting from September to November allows early vegetative growth after the peak monsoon heat and harvest from winter into spring. In relatively mild protected locations, growers may use staggered batches through the cool season. In hot interior areas, late planting can push flowering into rising March–April temperatures, which may reduce stem quality.

In hill regions and naturally cool belts, windows can be wider, but protected cultivation is still useful to exclude heavy rain, stabilise humidity and protect stems. Local trials matter more than a generic calendar. Start with a small block if your farm has not produced lisianthus before.

A naturally ventilated polyhouse can work where outside temperatures are moderate and side ventilation is good. Where summer heat remains high, a fan-and-pad system offers more control, but it also needs reliable power, water quality and disciplined operation. Compare the two systems before making the crop plan: NVPH versus fan and pad polyhouse.

Four weeks before transplanting: prepare the structure and beds

Lisianthus needs a clean, well-drained and uniform root zone. It does not tolerate stagnant water around roots, especially during cool and humid weather. Finish bed work before plugs arrive; a delayed transplant can disturb the whole market schedule.

Prepare these essentials

  1. Clean the house thoroughly. Remove old crop residues, weeds, used twine and debris. Repair holes in insect net and close entry points for thrips.
  2. Check drainage. Maintain drains around the polyhouse and between beds. Monsoon water must never enter or stand near the root zone.
  3. Make raised beds. A common approach is beds about 0.8–1.0 m wide with paths that allow harvest movement. Bed height depends on soil drainage; poorly drained fields need higher beds.
  4. Test soil and irrigation water. Use a local laboratory or agronomist to assess pH, salinity and nutrient status. Lisianthus generally performs best in a slightly acidic to near-neutral root zone, around pH 6.0–6.8.
  5. Install drip and support net before planting. Check that each lateral delivers evenly. A horizontal flower-support net helps keep stems upright as the crop grows.
  6. Plan light management. Diffused covering helps spread light through the canopy. In high-radiation periods, temporary shade may be useful, but excessive shade produces weak growth. See the specification details of white diffused polyfilm when selecting cover material.

Avoid planting into beds with a recent history of severe root disease without a corrective soil-health plan. Discuss soil solarisation, organic matter quality and rotation options with your KVK or a qualified agronomist.

Week 0 to week 8: transplanting and vegetative growth

Plant plugs on the day they arrive if possible. Keep trays shaded and moist while preparing the work area, but do not leave them standing in water. Inspect for uniform roots, healthy foliage and plugs that hold together when gently removed.

Spacing and transplant method

Commercial density often falls in the range of 40–64 plants/m², depending on cultivar vigour, intended stem grade, season and marketing target. A 12.5 cm × 12.5 cm or 15 cm × 15 cm grid is commonly considered, but do not copy a density without checking your variety supplier's recommendation.

Place plugs at the same depth as they were in the tray. Planting too deep can invite collar problems; exposing the plug can dry roots. Irrigate lightly after transplanting to settle the medium around the plug.

During the first two to three weeks, the objective is rooting, not rapid top growth. Keep the root zone evenly moist but not saturated. Frequent, small irrigations may suit light media, while heavier soils need a different schedule. Use moisture observation, drainage condition and plant response rather than operating drip by a fixed clock alone.

Climate targets and crop observations

Lisianthus prefers moderate conditions. Day temperatures around the high teens to mid-twenties °C are generally favourable; persistent temperatures above about 30°C can reduce quality. Low temperatures in the early crop phase can lead to rosetting in susceptible varieties. The exact thresholds differ by cultivar.

Open side curtains early enough to remove humidity, while avoiding a cold draft directly on young plants. Good insect exclusion starts with properly fitted side insect net, but netting also changes airflow. Use ventilation and, where fitted, air circulation to prevent humid pockets in the crop.

Walk the house at least twice a week and record:

  • plant survival and gaps in each bed;
  • wet patches or uneven drip output;
  • leaf colour and uniformity;
  • thrips, aphids, leaf miners and mites;
  • early leaf spots, damping-off or root-zone symptoms;
  • daytime temperature and morning humidity.

Replace missing plants early only if the replacement can catch up. Late replacements make harvesting and grading more difficult.

Week 9 to week 18: stem growth, buds and quality management

This is the stage where the future stem grade is largely decided. Plants need steady nutrition, an active root system, enough light and physical support. Use fertigation based on water analysis and crop stage. Avoid sudden changes in fertiliser concentration; monitor root-zone EC and pH where possible.

Lisianthus needs balanced nutrition rather than a heavy nitrogen push. Excessive nitrogen can encourage soft growth and delay balanced flowering. Deficiency symptoms can resemble root stress, so inspect roots and irrigation uniformity before correcting nutrients.

Raise the support net as stems lengthen. Keep pathways dry and remove weeds immediately. Do not crowd harvest crates or leave decaying leaves in the house, as these increase humidity and disease pressure.

Bud-stage protection

When buds begin developing, protect flowers from mechanical damage, water splash and pest feeding. Thrips can scar buds and petals, directly lowering value. Use sticky traps for monitoring, inspect blooms regularly and follow an integrated pest-management plan recommended by your local KVK or flower-crop adviser.

For any plant-protection product, follow the approved label, pre-harvest interval and local expert advice. Do not spray simply because a calendar says so. Identify the pest or disease first, improve sanitation and climate conditions, and use only registered options as advised.

Botrytis and other fungal problems are more likely when nights are cool and humidity stays high. The practical response is not only plant protection: ventilate at the right time, remove infected material, avoid late-day overhead wetting, and maintain spacing and airflow.

Week 16 onward: harvest, grading and market dispatch

Begin harvest when stems meet your buyer's expected length, strength and flower-opening stage. For local wholesale supply, a stem may be cut with one or more flowers beginning to open and other buds showing colour. For distant transport, buyers may prefer a tighter opening stage. Confirm this before the first cutting.

Harvest during the coolest part of the day. Use clean, sharp tools and put stems into clean water or an appropriate post-harvest hydration system immediately. Keep cut stems out of sun and move them rapidly to a shaded grading area.

Harvest routine checklist

  • Cut only marketable stems; do not mix damaged stems into premium bundles.
  • Grade by stem length, straightness, flower count, bud stage and freedom from blemishes.
  • Remove lower foliage that would sit in water.
  • Use clean buckets, clean packing surfaces and clean sleeves or cartons.
  • Pre-cool quickly where facilities are available, especially for longer transport.
  • Record daily stem count, grade-wise rejection and buyer feedback.

Lisianthus opens progressively, so the same planting can need repeated harvests. Harvest frequency rises in warmer, brighter weather. Book labour accordingly. A missed harvest can result in over-open blooms, bent stems and lower shelf life.

Final harvest to crop turnover: do not rush the reset

The end of the crop is the right time to stop pest and disease carryover into the next planting. Decide the final picking date based on remaining stem quality, labour cost and your market, not only on the presence of a few flowers.

After the last harvest, remove complete plants and crop residue from the structure. Do not compost visibly diseased material beside the polyhouse. Clean support nets, flush drip lines as appropriate, repair curtains and inspect the cover and net for damage.

Then review the crop log. Compare each planting block for plug source, planting date, first harvest date, total marketable stems, rejects, pest peaks and price realisation. This record is more useful for the next lisianthus calendar than a generic yield claim.

If you are scheduling a new protected-flower block, first understand the structural basics in What is an NVPH?. For material planning, you can build a kit and view this week’s rates with item quantities listed clearly. Use a construction team experienced with protected structures for erection and site-specific engineering.

Next steps

  1. Identify your target buyers and the months when they need lisianthus.
  2. Choose a suitable variety and book uniform plugs from a reliable specialist nursery.
  3. Work backward 20–24 weeks from the target first harvest, keeping a weather buffer.
  4. Test soil and water, prepare raised beds, drip, drainage and support nets before plug arrival.
  5. Run a small, documented trial if this is your first lisianthus crop or if your local temperatures are challenging.

A disciplined lisianthus polyhouse crop calendar is mainly about timing and consistency: quality plugs, a stable root zone, controlled humidity, regular scouting and rapid post-harvest handling.

Frequently asked questions

How many months does lisianthus take in a polyhouse in India?

From plug transplanting to the first marketable stems, lisianthus commonly takes about 4–6 months. The full picking period can extend the crop longer, depending on variety, season and how well temperature is managed.

Which month is best for planting lisianthus plugs in India?

In many warm plains, September to November is a practical transplanting period because plants avoid peak summer heat during early growth. The best date still depends on local night temperatures, altitude and the harvest market you want to supply.

Can lisianthus be grown in a naturally ventilated polyhouse?

Yes, it can be grown in a naturally ventilated polyhouse where temperatures are moderate and ventilation is managed well. Very hot locations may need greater environmental control to produce long, premium-grade stems consistently.

Why does lisianthus remain short and fail to flower properly?

A short, non-flowering plant may be rosetted, often due to unsuitable low temperatures during the sensitive early stage, though variety and plug history also matter. Ask the plug supplier about rosette tolerance and review your temperature records before replanting.

What is a suitable lisianthus plant density per square metre?

A working range is often 40–64 plants per m². Select the final density based on cultivar vigour, the desired stem grade, available light and your supplier’s recommendation, then trial it in one block before expanding.

अपना किट बनाएं