यह कैसे काम करता हैअलग सामग्री खरीदें

How to Design a Double-Door Entry Cabin for a Polyhouse

Polyhouse Constructions Agronomy Desk · 13 नव॰ 2026

A double door entry cabin polyhouse is a small enclosed vestibule with one door facing outside and a second door opening into the growing area. It is one of the most useful physical barriers against whiteflies, thrips, aphids and other insects entering with workers, visitors or harvested produce.

For most Indian polyhouses, make the cabin large enough for one person to enter, close the first door, and then open the second door without touching either door with a trolley or crate. A practical pedestrian cabin is usually about 2.4–3 m wide and 2.5–3 m deep. If harvest crates, a trolley or a small spray cart must pass through, plan a larger cabin from the beginning.

Start with the entry route, not the cabin drawing

Mark how people and material will actually move on the farm before fixing the location. The cabin should sit on a firm, well-drained approach connected to the main farm path. It should also lead directly to a central path or headland inside the polyhouse.

Avoid placing it where workers must cross crop beds immediately after entering. That leads to soil, plant debris and insects being carried farther into the structure.

A good entry route has these features:

  • A hard, clean approach surface outside the cabin, preferably compacted gravel, pavers or concrete.
  • A small apron where workers can wait without blocking the door.
  • A clear internal aisle from the cabin to the main working path.
  • No stagnant water near the threshold during monsoon.
  • Enough turning room for crates, harvest trolleys or input bags.

Place the cabin on the side that gives easy access from the packing area or farm road, but do not sacrifice drainage or row layout just for a shorter walking distance. Review the wider layout while planning polyhouse doors, size and placement and the internal crop paths.

Choose cabin dimensions for the actual movement

The right size depends on whether the entry is only for workers or is also the regular route for harvest and inputs. A cabin that is too narrow causes people to hold both doors open while manoeuvring. That defeats its purpose.

Use of entry cabin

Suggested internal clear size

Suggested clear door width

Planning notes

Worker-only entry

2.0–2.4 m wide × 2.0–2.5 m deep

0.9–1.0 m

Fits one worker comfortably; keep a small space for footwear cleaning or hand hygiene.

Regular worker entry with crates

2.4–3.0 m wide × 2.5–3.0 m deep

1.0–1.2 m

A practical choice for many vegetable and flower units.

Hand trolley or frequent harvest movement

3.0 m or more wide × 3.0–4.0 m deep

1.2–1.5 m

Check the trolley width, turning radius and crate overhang before finalising.

Separate harvest/material entry

Size to the chosen trolley and aisle

1.2–1.5 m or more

Prefer a separate double-door cabin if movement is frequent. Do not turn the staff entry into a loading bay.

These are planning ranges, not a substitute for a site drawing. Measure the widest trolley, including handles and loaded crates. Leave at least 300–450 mm of side clearance where possible. Also consider the door frame, which reduces the usable opening compared with the nominal door size.

For a larger multi-span polyhouse, two cabins can work better than one oversized cabin: one clean worker entry and one controlled material or harvest entry. This reduces congestion at shift change and avoids repeated opening of the main hygiene entry.

Set up two doors as an insect airlock

The key rule is simple: only one door should be open at a time. The space between the doors gives workers time to close the outer door before opening the crop-side door.

Door placement and swing direction

Place the doors in line if trolleys must move straight through. For a worker-only cabin, an offset arrangement can also work. Offset doors reduce a direct line of sight and wind path from outside to the crop area, but they need a wider cabin and may be inconvenient for trolleys.

For hinged doors, a commonly workable arrangement is:

  • The outer door opens outward, away from the cabin.
  • The inner door opens into the polyhouse, away from the cabin.
  • Both doors therefore leave the cabin floor clear when open.

Check that the outer door will not hit a drainage channel, pile of crates or a person standing on the approach. Inside, make sure the inner door does not strike crop rows, irrigation lines or a trolley in the main aisle.

If inward or outward swing is restricted by the site, sliding doors can save space. However, they need close-fitting tracks and regular cleaning. A poorly maintained sliding door can leave gaps at the side or bottom. For insect exclusion, a well-fitted, self-closing hinged door is usually simpler to inspect.

Use closures that workers will actually use

Install self-closing springs, hydraulic closers or another reliable return system. A door that must be pulled shut manually will eventually be left open during busy harvesting.

Add a visible instruction on both sides: “Close this door before opening the next door.” A simple red/green occupied sign or a latch routine can help where several workers enter together. Do not let a group hold both doors open to save a few seconds.

The cabin is only one part of the pest barrier. Learn why this buffer matters in why an entry cabin helps in protected cultivation.

Detail the insect barrier at every edge

Most insect entry happens through overlooked gaps, not through the centre of a correctly closed door. Check the frame-to-cover junction, the bottom threshold, hinges, roof connection and cable openings.

Use a rigid, braced GI frame so that the doors remain square through heat, rain and repeated use. The cabin covering should connect continuously with the polyhouse side wall or end wall. Where insect net is used, pull it taut and secure it without tears.

Useful detailing includes:

  • Tight door overlaps: Use a rebate, overlap strip or brush seal so the closing edge has no visible gap.
  • Bottom sealing: Provide a low, smooth threshold or door sweep. Keep it low enough for trolley wheels, but high enough to avoid a continuous gap.
  • Protected joints: Seal openings around pipes, wires and curtain mechanisms. Rodents can enlarge small openings, and insects follow them.
  • Repair access: Fit netting so a damaged panel can be replaced without dismantling the entire cabin.
  • No open windows: If daylight or ventilation is needed, use a properly framed insect-net opening, not an uncovered window.

Choose mesh according to the pest pressure, crop and ventilation design. Finer mesh blocks smaller insects but also restricts airflow more. The same selection issue applies to side vents; see this guide on choosing insect-net mesh. Inspect the cabin net and the side insect net together, because one damaged area can bypass the rest of the system.

Do not use loose shade net as the main insect barrier at the entry. Shade net is valuable for managing light, but its openings are generally not intended to exclude small insect pests.

Plan the floor, threshold and monsoon drainage

The entry cabin floor should be washable, non-slippery and slightly raised above the surrounding approach. Bare soil quickly becomes muddy in monsoon, and the mud carries weeds, soil-borne spores and insects into the growing zone.

A concrete floor with a broom finish is common. Interlocking pavers can also work if joints are firm and easy to clean. Avoid highly polished surfaces that become slippery when wet.

Provide a gentle floor fall towards a drain or the outside approach. Do not allow water to flow from the external yard into the cabin or from the cabin into the crop area. In high-rainfall locations, provide a roof overhang, a drain along the approach and a properly designed outlet for runoff.

Keep the threshold as flush as practical for trolley passage, but avoid an open under-door gap. If a raised sill is unavoidable, use a small ramp on both sides. Test it with a loaded trolley, not an empty one.

Arrange worker hygiene without causing congestion

An entry cabin is not automatically a full sanitation room. For a small unit, it can hold basic items: a footbath tray where justified, hand-cleaning point nearby, a hook for protective clothing, a bin and a signboard. For bigger farms, make a separate changing or sanitation space next to the cabin rather than overcrowding the airlock.

Keep these operational rules practical:

  1. Workers arrive through the outside door and close it fully.
  2. They clean footwear or use the farm’s chosen hygiene process.
  3. They check that the inner door is closed before opening it.
  4. They enter the crop area and allow the door closer to shut the inner door.
  5. Harvest crates and tools return through the same sequence, unless a separate material cabin is available.

Footbaths need regular cleaning and replenishment to be useful. A dirty tray is not a hygiene system. For crop protection products or disease-control decisions, follow label directions and consult your KVK or a qualified agronomist.

Keep used crates, damaged plants, pruning waste and outside footwear out of the airlock. These objects consume space and make workers prop doors open.

Match the cabin to the polyhouse type

In a naturally ventilated polyhouse or nethouse, the cabin mainly limits insect entry. Its doors and coverings should integrate with the end-wall netting, curtain arrangement and crop-side path. It must not obstruct the opening and closing of side curtains.

In a fan-and-pad polyhouse, entry design also affects the controlled air environment. Opening both doors together allows untreated outside air to enter and can disturb the pressure balance near the entry. A properly sealed two-door vestibule is especially valuable, and larger projects may benefit from a more formal personnel airlock.

For all types, the cabin frame needs to withstand local wind, repeated door impact and monsoon rain. Final member sizes, foundations and bracing should be based on the overall structural design, not chosen only by cabin size. This is particularly important in coastal, hilly and high-wind sites.

When specifying a kit, list the cabin separately: frame members, door frames, hinges or closers, cover material, insect net, fasteners, seals and the floor interface. With Polyhouse Constructions’ kit builder, buyers can review item quantities and the current weekly rate before ordering material. The structural erection itself is handled by Kryzen Biotech’s construction team.

Pre-handover checklist for the entry cabin

Use this checklist before the crop is planted:

Next steps

First, measure your largest trolley and map the outside approach, cabin and inside aisle on paper. Then select a pedestrian-only, mixed-use or separate-material entry design based on daily movement, not just the number of workers.

Finally, coordinate the cabin with end-wall cladding, insect net, drainage and door hardware before fabrication. A small cabin planned early is far easier to seal and operate than one added after crop beds and paths are fixed.

Frequently asked questions

Can I use only one door if my polyhouse has insect net on the side vents?

A single door is a weak point because workers and material can carry insects directly from outside into the crop area. Side insect net is still essential, but a two-door cabin adds a separate controlled buffer at the busiest opening.

Should the doors in a double-door entry cabin be insect-net doors or solid doors?

Either can work if the frame, edges and bottom are properly sealed. Insect-net doors support airflow in naturally ventilated structures, while more enclosed doors may better suit a fan-and-pad polyhouse; the crop, climate and ventilation design decide the choice.

How many workers can enter the cabin at one time?

Design the routine for one person or one trolley at a time, even if the cabin is physically larger. Allowing groups to pass together makes it more likely that both doors will remain open.

Where should I keep harvest crates and pruning waste?

Keep them outside the personnel airlock or use a separate material-handling entry when possible. Storing crates or waste in the cabin blocks movement, makes cleaning difficult and encourages workers to prop doors open.

Do I need a separate entry cabin for a nethouse?

It is strongly useful where insect-sensitive crops are grown, especially if the nethouse uses fine insect netting. The cabin can be simpler than one for a climate-controlled polyhouse, but it should still have two sequential, well-fitted doors and a clean approach.

अपना किट बनाएं