આ કેવી રીતે કામ કરે છેઅલગ સામગ્રી ખરીદો

Mint Cultivation in Nethouse: Propagation, Bed Setup and First Harvest

Polyhouse Constructions Agronomy Desk · 12 નવે, 2026

Mint, or pudina, is usually multiplied vegetatively because runners and stem cuttings give a uniform crop faster than seed. For mint cultivation in nethouse, start with clean, vigorous planting material, use raised beds with good drainage, keep the root zone evenly moist and take the first harvest only after the stand has covered the bed well.

A nethouse is useful for mint where heavy rain, hot winds, leaf damage or insect pressure reduce marketable bunch quality. It does not remove all crop risks. Poor drainage, dense planting and wet leaves can still cause root and leaf diseases.

Choose the right nethouse conditions for mint

Mint is a spreading perennial herb. It grows best under mild to warm conditions, roughly 18–30°C, with a moist root zone and good air movement. In many Indian plains, growth is fastest from late winter through the monsoon transition. Peak summer can reduce leaf size and make plants flower early, especially where the nethouse becomes hot and dry.

A naturally ventilated shade-net structure is generally sufficient for fresh-herb production. Use the shade level according to local heat and season. A 35–50% shade arrangement is commonly considered in hot locations, but excessive shade makes stems soft and long, reduces branching and can lower aroma. In cooler months, do not shade more than necessary.

Before selecting a structure, understand the difference between covered systems in this guide to what is a nethouse. For mint, the key requirement is not heavy climate control. It is uniform light, rain moderation where needed, drainage and ventilation.

Keep the following points in mind:

  • Choose a level site with no standing water after rain.
  • Keep side ventilation open whenever outside conditions permit.
  • Fit side insect net if sucking pests are common in the area, while maintaining adequate airflow.
  • Avoid placing mint below roof-drip lines or near areas where irrigation water collects.
  • Plan separate entry, clean tools and footbath practices if the same nethouse carries several herb crops.

Runners or cuttings: select healthy planting material

Mint seed is not preferred for commercial fresh-herb beds because seedlings can vary in aroma, vigour, leaf shape and growth habit. Runners and cuttings preserve the characteristics of the mother plant.

Buy or collect planting material only from a healthy, true-to-type mother block. Do not take runners from patches showing yellowing, wilting, root rot, severe rust, mosaic-like leaf patterns or heavy aphid infestation. A weak mother crop carries its problems into every new bed.

Comparison of mint propagation methods

| Method | What to plant | Main advantage | Main caution | Typical use |
|---|---|---|---|---|
| Runner propagation | Underground or creeping stem pieces with 2–3 healthy nodes | Establishes quickly and produces many shoots | Can spread soil-borne disease if source is unclean | Best for rapid bed establishment |
| Stem cuttings | 8–12 cm tender but firm terminal shoots with 2–3 nodes | Easy where runners are limited; clean, selected shoots can be used | Needs higher humidity and careful watering until rooted | Small nursery blocks and replacement plants |
| Seed | Seed sown in trays or beds | Useful mainly for breeding or special varieties | Uneven crop and slower establishment | Usually avoided for commercial pudina beds |

How to prepare runners

Lift runners early in the morning or during cool hours. Select firm, pale to green sections with visible nodes and healthy roots where possible. Cut them into pieces around 8–12 cm long, keeping two or three nodes on each piece.

Keep the pieces shaded and moist from lifting to planting. Do not leave them in the sun, bundled tightly in a hot sack or submerged in water for long periods. Plant them the same day wherever possible.

How to prepare stem cuttings

Take cuttings from non-flowering shoots. Each cutting should have two or three nodes. Remove leaves from the lower node that will go into the soil, but retain a few small upper leaves. A soft, very young tip may wilt easily, while an old woody stem roots more slowly.

Insert cuttings into a moist nursery bed, plug tray or directly into a well-prepared production bed. If rooting in a nursery, maintain light shade and high humidity without keeping the medium waterlogged. Most healthy cuttings form usable roots within roughly 10–20 days, depending on temperature and variety.

Prepare raised beds before planting

Mint roots need oxygen as much as they need water. Raised beds are therefore safer than flat planting in monsoon-prone and heavy-soil areas. They also make harvesting and drip-line management easier.

Make beds about 0.9–1.2 m wide, with 25–35 cm paths between them. A raised bed height of 15–25 cm is useful where drainage is slow. Keep bed length practical for irrigation uniformity; very long beds often receive uneven water at the far end.

Work the soil to a fine but open tilth. Mix in well-decomposed farmyard manure or mature compost based on soil condition and the nutrient plan. Fresh, undecomposed manure can create uneven heating, attract flies and contribute to root-zone problems. A soil test before a new herb block is worthwhile, particularly for pH, salinity and available nutrients.

Mint generally performs well in a slightly acidic to near-neutral soil, around pH 6.0–7.5. Avoid saline water or saline soil where possible. High salt slows rooting, causes leaf-edge scorch and reduces the tender growth needed for fresh bunch sales.

For growers setting up or repairing a nethouse, the specifications glossary can help in understanding structural and net terms. Keep pathways clean and slope the outside area so rainwater drains away from the structure.

Plant runners or cuttings at even spacing

Plant when the bed is moist, not muddy. In much of India, late winter to early monsoon is favourable, but planting can be staggered through the year where water, temperature and market demand are managed. Avoid planting in the hottest afternoon hours.

For fresh mint, a practical starting arrangement is 20–30 cm between rows and 15–20 cm between plants within a row. Wider spacing suits vigorous varieties, humid areas and crops intended for repeated harvest. Closer spacing covers beds quickly but creates a humid canopy and makes leaf disease harder to manage.

Runner planting method

  1. Mark rows across the bed at the planned spacing.
  2. Open shallow furrows or holes, around 3–5 cm deep.
  3. Lay runner pieces horizontally or at a slight angle, ensuring at least one node is under the soil.
  4. Cover lightly with loose soil. Do not bury runners too deeply.
  5. Press the soil gently for contact, then irrigate immediately with a light watering.

A useful approach is to place one healthy runner piece per planting point. Where material is short, a longer runner may be laid in a shallow line, but ensure nodes are covered and avoid overcrowding.

Cutting planting method

Make a small hole with a dibbler and insert one rooted cutting per point. Bury the lower node and firm the medium lightly. If unrooted cuttings are planted directly, retain enough exposed leaves for photosynthesis but reduce leaf area if wilting is severe. For the first week, water lightly and frequently enough to keep the root zone moist.

Do not allow standing water after planting. A cutting that remains wet at its base in poorly aerated soil is more likely to rot than root.

Manage the first 30 days carefully

The early period decides how quickly mint fills the bed. The aim is to build roots and branches, not to push tall, soft growth with excess water or nitrogen.

Irrigation and nutrition

Use drip irrigation where possible. It keeps foliage drier than overhead irrigation and allows uniform watering. In the first 7–10 days, give short, frequent irrigations according to weather and soil type. Later, lengthen the interval as roots spread, while ensuring the bed never dries hard.

Sandy beds may need more frequent irrigation than loamy beds. During cloudy or humid weather, reduce watering because mint uses less water and root-zone disease risk rises. Check moisture 5–8 cm below the surface instead of irrigating by a fixed calendar.

Apply nutrients according to a soil test and crop response. Mint removes nutrients repeatedly because it is harvested many times. Split applications through irrigation are usually more efficient than one heavy dose at planting. Avoid excessive nitrogen: it may produce lush growth that bruises easily in transport and is more prone to pests and disease.

Encourage branching and a clean canopy

Once plants have rooted and begun new growth, remove any flower buds that appear early. Flowering diverts energy away from tender leafy shoots and can reduce leaf quality for fresh markets.

Keep bed edges clear. Remove weak, diseased or badly infested plants promptly, including their roots, and do not leave them in the nethouse. Scout twice a week for aphids, mites, leaf spots, rust symptoms, wilting and root discoloration. Improve airflow, avoid overhead watering late in the day and keep tools clean. If a crop-protection treatment is needed, choose only products registered for the crop and pest, follow the label, observe harvest intervals and consult your KVK or qualified agronomist.

Take the first harvest without checking regrowth

First harvest usually comes about 60–90 days after planting from runners, depending on variety, temperature, fertility, irrigation and whether the market wants bunches or loose leaves. Cuttings may take a little longer if they were planted before strong rooting. Do not harvest simply because a few plants look tall. Wait until the bed has a reasonably uniform, well-branched canopy.

For the first cut, harvest in the cool morning after surface moisture has dried. Use clean, sharp scissors or a sickle. Cut stems about 5–8 cm above the soil surface, leaving several healthy nodes and leaves for regrowth. Cutting too close to the ground removes the buds needed for the next flush.

Sort harvested mint immediately in shade. Remove yellow, damaged and diseased leaves. Bunch to the buyer’s preferred weight, or pack loose in clean ventilated crates. Do not compress warm, wet mint in deep bags; heating and blackening can happen quickly.

After harvest, irrigate lightly, remove weeds and diseased leaves, and support regrowth with the next planned nutrient application. Subsequent cuts can often be taken at about 25–40 day intervals under good conditions. Intervals become longer in cool weather and shorter in warm, actively growing periods.

For planning staggered leaf-crop harvests in protected cultivation, see this related guide on spinach harvest scheduling in a shade-net house. The crop is different, but the principle of planting in blocks for steady market supply is useful for mint too.

Common establishment mistakes to avoid

| Mistake | What happens | Better practice |
|---|---|---|
| Using unknown runners from old fields | Diseases and off-types enter the nethouse | Use healthy, traceable mother material |
| Flat beds in heavy soil | Waterlogging and poor root growth | Make raised beds and drainage channels |
| Planting too densely | Weak airflow, small leaves and disease pressure | Keep 20–30 cm row spacing and adjust for vigour |
| Too much shade | Long, soft stems and lower branching | Use only enough shade for local heat stress |
| Heavy irrigation every day | Root rot and nutrient loss | Check root-zone moisture before watering |
| Cutting at soil level on first harvest | Slow or uneven regrowth | Leave 5–8 cm stubble with active nodes |

Next steps

Start with a small mother block or one production bay and record the planting date, source of runners, irrigation frequency, first-harvest date and buyer feedback on aroma and bunch quality. These records help decide the best spacing and harvest interval for your variety and local market.

If you are planning a new shade-net unit, compare options through nethouse cost per acre, and use the kit builder with live weekly rates to review the required material, quantities and current item rates. Polyhouse Constructions supplies complete nethouse material kits and individual structure, net and fitting components; erection is handled separately by Kryzen Biotech’s construction team.

Frequently asked questions

Can mint be grown from seed in a nethouse?

It can be grown from seed, but commercial fresh mint is usually propagated through runners or cuttings. Vegetative planting gives a faster and more uniform crop with more predictable aroma and leaf type.

How many mint runner pieces are needed for one bed?

The quantity depends on bed width, row spacing and the length of each runner piece. Calculate planting points first at your selected spacing, then arrange one healthy 8–12 cm runner piece with two or three nodes for each point.

Which shade net is suitable for mint cultivation in nethouse?

In hot locations, growers commonly consider moderate shade in the range of 35–50%, but the correct level depends on season and local heat. Too much shade can produce soft, elongated mint with lower branching, so observe the crop and maintain ventilation.

When can I harvest mint after planting runners?

The first harvest is commonly ready around 60–90 days after planting healthy runners. Harvest only after the crop is well rooted and the canopy is uniform, then leave 5–8 cm of stem for regrowth.

How often can mint be harvested after the first cut?

Under favourable warmth, nutrition and irrigation, later harvests may be possible every 25–40 days. The interval changes with variety, season, plant health and how much stem was left after the previous harvest.

તમારી કિટ બનાવો