Indeterminate Tomato Polyhouse Profit per Acre: Cost, Yield and Returns
Polyhouse Constructions Agronomy Desk · 12 નવે, 2026
Indeterminate tomato can give strong returns in a polyhouse, but it is a long crop with high daily management needs. For one acre, a realistic plan must separate crop operating cost from the cost of the polyhouse itself, then test profit against saleable yield and the average price actually received across the season.
A well-managed crop may produce roughly 18–30 kg of saleable fruit per m² over an 8–11 month cycle. On an acre-sized unit, actual planted area is lower than 4,047 m² because of paths, service space and water units. Therefore, profit should be calculated from your usable crop area, grade-wise sales and packing costs—not only from total harvest.
Start with saleable yield, not total picking
Indeterminate hybrids continue growing and bearing fruit as the stem is trained upwards. This allows harvesting over many months, but also means the crop can lose money if disease, poor pollination, heat stress or labour gaps reduce the marketable portion.
For budgeting, record three yield categories:
- Grade A: uniform size, good colour, firm fruit, no cracks or blemishes. This earns the best price.
- Grade B: smaller, slightly uneven or minor surface defects. It may sell in local markets, to wholesalers or for processing, but at a lower rate.
- Rejects: cracked, rotted, pest-damaged or severely misshapen fruit. These should not be included in projected revenue.
A crop may look high yielding at harvest, but a high proportion of Grade B and rejects can sharply lower the realised price. Build your plan around saleable kg, not biological yield.
A practical yield range for an acre-sized polyhouse
The range below is for a naturally ventilated polyhouse with reasonably good crop management. Results vary by hybrid, climate, planting date, soil or growing medium, irrigation water quality and crop duration.
| Planning item | Conservative case | Good management case | Strong crop and market case |
|---|---:|---:|---:|
| Usable planted area from a 1-acre site | 2,800–3,200 m² | 3,000–3,400 m² | 3,000–3,500 m² |
| Saleable yield | 18–22 kg/m² | 23–27 kg/m² | 28–30 kg/m² or more |
| Saleable production | about 50–70 tonnes | about 70–90 tonnes | about 85–105 tonnes |
| Grade A share | 55–65% | 65–75% | 70–80% |
Do not use the highest yield quoted by a seed supplier as your financial base case. Use your own last crop records, or begin with the conservative range in year one.
Revenue depends on blended price, not the peak tomato rate
Tomato prices can move sharply within a few weeks. A crop harvested for eight or more months will not sell at one rate. The number that matters is the season-long blended realisation after adjusting for grade, commission, local transport, crates, sorting and unsold lots.
For example, Grade A fruit may go to a premium retailer, hotel supplier or organised buyer, while Grade B goes to the mandi at a lower price. If 70% of fruit sells at ₹38/kg and 30% at ₹20/kg, the blended price is not ₹38/kg. It is ₹32.60/kg before other selling deductions.
Use this simple calculation:
Blended realisation = (Grade A kg × Grade A net rate + Grade B kg × Grade B net rate) ÷ total saleable kg
“Net rate” means what reaches your farm account after sales-related deductions. Keep it separate from the mandi display price.
Illustrative revenue scenarios
These are planning examples, not a promise of price or income.
| Scenario | Saleable production | Blended farm-gate realisation | Gross crop revenue |
|---|---:|---:|---:|
| Cautious | 55 tonnes | ₹22–28/kg | ₹12–15 lakh |
| Planned base case | 75 tonnes | ₹28–36/kg | ₹21–27 lakh |
| Strong execution and market access | 90 tonnes | ₹36–45/kg | ₹32–40.5 lakh |
The same 75-tonne crop gives ₹21 lakh at ₹28/kg, but ₹27 lakh at ₹36/kg. This ₹6 lakh difference is why buyer planning and harvest timing matter as much as increasing yield.
Before planting, speak with at least two possible channels: local wholesale market, direct retailer, institutional buyer, aggregator, processor or a nearby city distributor. Confirm preferred fruit size, packing, volume per delivery and payment cycle. High-value markets often require regular, clean and graded supply, not occasional bulk loads.
Estimate crop operating cost for the full crop duration
An indeterminate tomato crop has continuing expense because pruning, lowering, clipping, harvesting and fertigation continue for months. A low monthly cost estimate can become a large total by the final harvest.
For an acre-sized polyhouse, a broad crop operating budget of ₹7–15 lakh is a useful first planning range. This excludes land cost, the new polyhouse structure, and major new infrastructure such as a borewell or packhouse. It can be lower where family labour and existing equipment are used, and higher where labour, media, cooling and packaging standards are more intensive.
| Cost head | What it includes | Why it changes |
|---|---|---|
| Seedlings and nursery | hybrid seedling purchase, tray raising or nursery charges, gap filling | hybrid, seedling quality and plant population |
| Bed or growing-medium preparation | soil testing, beds, mulch, media or substrate replacement where applicable | soil system versus soilless system |
| Drip and fertigation inputs | water-soluble fertilisers, acids where advised, filters, repairs and testing | water quality, yield target and system condition |
| Crop support | twine, clips, hooks, trellising wire repairs | crop height and training method |
| Labour | transplanting, pruning, de-leafing, lowering, harvest and sorting | labour availability and crop duration |
| Plant health management | scouting, sanitation, traps, biological or approved plant-protection inputs | pest pressure and discipline of monitoring |
| Power and water | pumping, fertigation and any ventilation or cooling equipment | season and equipment type |
| Packing and selling | crates/cartons, grading, local transport, commission and handling | buyer requirement and market distance |
| Repair and contingency | drip leaks, curtain repairs, replacements and unexpected crop work | age and maintenance of the house |
A grower should also add interest on working capital. Inputs are paid from transplanting onward, while substantial sales begin only after the first harvest. Buyers who pay after 15–30 days increase the cash requirement further.
Do not ignore structure cost, depreciation and finance
Crop profit and business profit are different. A crop may generate positive cash surplus but still give a weak return when loan interest, depreciation and periodic replacement costs are included.
Calculate profitability in two views:
- Crop cash margin = crop revenue − annual crop operating expenses.
- Business profit = crop cash margin − interest − depreciation − insurance, repairs and annual share of common assets.
Common assets include the polyhouse, drip and fertigation equipment, water storage, electrical work, packhouse area and transport equipment. Polyfilm and insect nets also have replacement cycles, so budget for them even if replacement is not due this season.
For a naturally ventilated structure, compare the design with your local heat, wind and disease pressure before deciding only on the lowest initial cost. Read about NVPH cost and profit per acre and the operating differences in NVPH versus fan and pad. Fan-and-pad cooling can support more controlled conditions in hot periods, but it adds power, maintenance and management costs.
For material budgeting, use the Build your kit page for live prices. It shows item quantities and the current week’s rate; rates change with GI steel and plastic prices.
A simple profit model for your own farm
Use a spreadsheet, notebook or phone sheet. Make three scenarios—cautious, expected and favourable—before you order seedlings.
Step-by-step calculation
- Measure actual planted area. Exclude pathways, tank space, work area and non-planted borders.
- Set plant population. Indeterminate tomato density is often around 2.2–3.0 plants/m², depending on hybrid vigour, pruning system and row layout.
- Choose a saleable yield per m². Start conservatively if you have no previous record.
- Divide yield by grade. Use expected Grade A, Grade B and reject percentages.
- Assign a net realised rate to each grade. Use local historical sales records where possible, not only current prices.
- List every recurring cost for 8–11 months. Include harvesting and packing labour through the final picking.
- Add finance and annual fixed costs. This gives the true business view.
- Find break-even price. Divide total annual cost by expected saleable kg.
For instance, if total annual cost allocated to the tomato crop is ₹18 lakh and expected saleable output is 75,000 kg, the break-even is ₹24/kg. If your expected blended net rate is only ₹25/kg, the margin is too narrow for a crop with price and disease risk.
Crop duration changes both profit and risk
Indeterminate tomato is usually planned as a long crop, often around 8–11 months from transplanting to final removal. In cooler seasons, harvesting may continue longer. In very hot and humid regions, extending an ageing crop can create more disease, poorer fruit quality and rising labour cost.
A longer crop is not automatically more profitable. Review it every month:
- Is weekly saleable output still adequate?
- Is the Grade A percentage falling?
- Are labour hours per kg rising?
- Is pest or disease pressure increasing?
- Is the expected price for the next 4–6 weeks above your variable harvesting and selling cost?
Remove the crop when the marginal return from continued picking is poor, rather than keeping it only because the plants are still alive. Leave sufficient turnaround time for removal, sanitation, repairs and bed preparation before the next planting.
Protect the price through harvest and grading discipline
Tomato value is often lost after a good crop has already been grown. Pick at the maturity stage requested by your buyer. Harvest during cooler hours, keep fruit out of direct sun, avoid overfilled crates and grade the fruit on the same day.
Maintain a harvest record with date, kilograms, grade, buyer, rate, rejected quantity and payment received. Within one season, this shows which planting window and buyer produce the best net return.
Good crop health also protects grade. Use clean nursery plants, remove diseased plant material promptly, control entry of insect vectors through maintained side insect net, and monitor the crop frequently. For a suspected pest or disease problem, seek guidance from your KVK or qualified agronomist and follow approved product labels exactly. Do not make spray decisions only after visible damage becomes widespread.
Common budgeting mistakes
The most expensive errors are usually planning errors, not one unusually costly input.
- Counting the full built-up acre as planted area.
- Using total harvest instead of saleable yield.
- Assuming one high market price for the whole season.
- Ignoring Grade B fruit and rejects in the revenue model.
- Leaving out twine, clips, crate losses, sorting labour and commissions.
- Treating family labour as free when judging business profit.
- Not budgeting interest and replacement of polyfilm, nets and drip parts.
- Planting before confirming a buyer’s fruit specification and payment terms.
If you are comparing crop choices for the same structure, see the parthenocarpic cucumber polyhouse cost per acre guide too. Cucumber has a different harvest pattern, labour requirement and market risk, so compare annualised returns rather than only one crop’s peak revenue.
Next steps
Prepare a three-scenario budget using your actual planted area and local buyer rates. Then calculate break-even price before fixing transplanting dates. Select a structure and ventilation approach suited to your climate, and check the specification of white diffused 250-micron polyfilm and side insect net as part of your material plan.
If you are considering subsidy support, confirm the current norms, eligibility and pre-approval conditions with your state horticulture department before starting work. Subsidy norms and procedures can change.
Frequently asked questions
How much yield can indeterminate tomato give per acre in a polyhouse?
A practical planning range is about 50–90 tonnes of saleable fruit from an acre-sized polyhouse, depending on usable planted area and crop management. Very strong crops may exceed this, but a new grower should not base loan repayment on the highest possible yield.
What is a good average tomato price to use in a polyhouse profit calculation?
Use a season-long blended net rate based on your likely Grade A and Grade B shares, rather than a peak mandi rate. Keep a cautious, expected and favourable price scenario because local demand and seasonal arrivals can change quickly.
How many plants are needed for one acre of indeterminate tomato?
Many growers work around 2.2–3.0 plants per m² of actual planted bed area. The final number depends on row spacing, hybrid vigour, pruning to one or two stems and the space used for paths.
How long does an indeterminate tomato crop last in a polyhouse?
The crop commonly runs for around 8–11 months from transplanting to final removal. Local temperature, disease pressure, plant health and whether continued harvesting remains profitable determine the final duration.
Is naturally ventilated polyhouse suitable for indeterminate tomato in India?
It is suitable in many Indian regions when ventilation, insect exclusion, drainage and crop management are sound. In very hot locations or difficult summer periods, growers should compare the extra control of fan-and-pad cooling against its higher power and maintenance needs.
