How it worksBuy individual items

Methi Cutting Schedule Nethouse: Continuous Leaf Harvest Plan

Polyhouse Constructions Agronomy Desk · 12 Nov 2026

Methi gives its best continuous leaf harvest when each cutting is based on crop stage, not just the number of days after sowing. In a nethouse, take the first cut when plants are well rooted and 18–25 cm tall, usually 25–35 days after sowing. Leave a 3–5 cm stubble, irrigate gently and support regrowth with timely nutrition. Subsequent cuts generally come every 12–22 days, depending on temperature, variety and crop vigour.

For growers using a nethouse, the main benefit is cleaner foliage and less damage from hard rain. But protection does not stop methi from becoming fibrous or bolting in heat. Harvest at the right stage and finish the crop before stem growth reduces bunch quality.

Start with a crop planned for repeat cutting

Choose a leafy, multi-cut methi type if the aim is bunches over several pickings. Seed meant only for seed production or a single mature harvest is less suitable. Ask the seed supplier whether the variety is recommended for leafy harvest and regrowth.

Uniform establishment is important because a bed with uneven plants cannot be cut uniformly. Prepare raised beds that drain quickly. Methi roots are shallow, so standing water after irrigation can weaken the crop and slow recovery after every cut.

For direct sowing, keep seed distribution even rather than dropping seed in thick patches. Very dense growth produces thin, humid foliage. This may look productive at the first cut, but lower leaves yellow quickly and disease spreads more easily. Aim for enough space for air movement while still producing a compact leafy canopy.

A practical crop plan is to sow smaller blocks at 7–10 day intervals. For example, divide 1,000 m² into four blocks of about 250 m². This gives more regular harvest volumes for retailers, hotels or local vegetable markets instead of a large glut on one day. For another leafy crop succession model, see this guide to coriander succession sowing in a nethouse.

First cutting: when and how to take it

The first cutting determines whether the crop gives good regrowth. Do not cut a weak, pale or water-stressed stand simply because it has reached a calendar date.

Take the first harvest when most plants have:

  • Four to six well-expanded true leaves
  • A height of roughly 18–25 cm
  • A firm root hold in the bed
  • Tender stems with no visible elongation towards flowering
  • Leaves that are dry from dew or irrigation

In mild winter weather, this stage often arrives around 30–35 days after sowing. In warmer conditions with good moisture, it may arrive in 22–30 days. Cool, cloudy weather can delay it. These are working ranges, not fixed dates.

Use a clean, sharp sickle or knife. Cut across the bed at about 3–5 cm above the soil surface. The objective is to retain the crown and lower growing points. Cutting at soil level may give a neat-looking first harvest, but regrowth will be slower and patchier.

Avoid pulling plants. Uprooted plants leave gaps, bring soil into the harvested leaves and reduce the yield of later cuts. Also avoid cutting when foliage is wet. Wet bunches heat up quickly after packing and have a shorter shelf life.

Harvest decision

Correct practice

Why it matters

First cutting stage

18–25 cm tall, well-rooted plants

Gives a marketable bunch without sacrificing crown strength

Cutting height

Leave 3–5 cm stubble

Protects regrowth points

Time of day

Early morning after dew dries, or late afternoon

Limits wilting and avoids wet packing

Harvest tool

Clean sharp blade or sickle

Makes a quick cut and reduces plant injury

Harvested material

Remove yellow leaves, weeds and cut debris

Keeps the regrowing crop clean and lowers disease risk

Methi cutting schedule nethouse: plan each harvest

The interval between cuts gets longer when days are cool and shorter when the crop has warm, bright growing conditions. Do not force a cut just to meet a schedule. Check leaf size, colour and canopy recovery first.

Cutting

Usual timing from sowing

Typical interval after previous cut

What to look for

First cut

25–35 days

—

Plants 18–25 cm tall and strongly rooted

Second cut

40–55 days

12–20 days

Fresh, even regrowth with tender leaves

Third cut

58–78 days

15–22 days

Canopy is still dense; stems remain tender

Fourth cut, only if crop is vigorous

78–100 days

18–25 days

No bolting, yellowing or serious pest build-up

In the cooler rabi period, expect intervals near the longer end of the range. In warm conditions, plants may regrow faster but can also become coarse or bolt sooner. In very hot months, a nethouse can reduce rain injury and moderate light, but it may still be too warm for a long multi-cut cycle. Ventilation is essential.

Usually, two or three good cuts are more profitable than pushing an exhausted crop to a fourth cutting. Decide after the third harvest by comparing leaf tenderness, regrowth speed, labour requirement and the market price for bunches. Replace a tired crop if it is becoming stemmy, uneven or prone to pest damage.

Nutrient recovery after every cut

Every harvest removes nitrogen, potassium and other nutrients in the leaves. If nutrients are not restored, the next flush is short, pale and slow. Yet excessive nitrogen produces soft, overly lush foliage that is more vulnerable to aphids and leaf diseases. The aim is steady recovery, not a sudden heavy feed.

Before sowing, incorporate well-decomposed organic matter and correct major soil issues based on a soil test. In a soil-grown nethouse, split the nitrogen supply rather than applying it all before sowing. Keep a portion for recovery after the first and second cuts.

Within a day after cutting, follow this sequence:

  1. Remove loose cut leaves and weeds from the bed.
  2. Irrigate lightly to settle the root zone. Do not flood the bed.
  3. Apply the planned recovery nutrition through fertigation or a light, even soil application, according to the farm nutrient plan.
  4. Give another light irrigation if nutrients were applied to soil and the soil is dry.
  5. Inspect the crop after 3–5 days for new leaf emergence, even green colour and pest activity.

If you fertigate, use fully soluble, compatible fertilisers and base the programme on water quality, soil test results and crop response. For leafy methi, the root zone should not be allowed to become highly saline. Excess salts can show as slow regrowth, scorched leaf edges and poor water uptake. Periodically check irrigation water and drainage where possible.

Compost, vermicompost and other organic inputs help soil structure, but they do not always release nutrients quickly enough to meet recovery demand immediately after a cut. Use them as part of base soil health, not as the only post-cut plan.

A pale canopy after cutting may be due to low nitrogen, but it can also result from overwatering, poor drainage, root disease, cold soil or salinity. Diagnose the cause before increasing fertiliser.

Irrigation and climate during the regrowth window

The first week after cutting is the recovery window. Maintain moist soil in the active root zone, but never continuously saturated soil. Light irrigation at suitable intervals is better than infrequent heavy flooding. The exact interval changes with bed media, weather, crop age and the discharge of the drip system.

Methi does well with bright but not scorching conditions. In hot periods, use appropriate shade and keep the sides open for air movement where insect pressure permits. A humid, closed nethouse creates soft growth and increases the risk of leaf spots and damping near the crown.

Check these three conditions after every cut:

  • Soil moisture: Take a handful from the root zone. It should feel moist and crumble, not form a wet smear.
  • Canopy dryness: Leaves should dry reasonably soon after irrigation. Long hours of wet foliage raise disease risk.
  • Temperature stress: If leaves wilt sharply at midday but recover by evening, review irrigation timing, shading and ventilation before increasing fertiliser.

Nethouse net selection affects temperature and light. Learn the differences in this overview of nethouse versus polyhouse. For a leafy crop, choose the structure and shade approach according to local summer temperature, monsoon rain pattern and target production season.

Protect leaf quality between cuttings

A crop grown for repeat cutting needs regular scouting. Aphids can multiply rapidly on tender regrowth, especially when nitrogen is excessive and ventilation is poor. Check the underside of leaves and the centre of the canopy at least twice a week. Start with sanitation, weed removal, balanced nutrition and physical exclusion where practical. For detailed non-dose guidance, read controlling aphids on protected methi leaf crops.

Remove plants with severe leaf spot, crown rot or virus-like symptoms rather than leaving them as an infection source. Keep harvest tools clean, particularly when moving from an affected bed to a healthy one.

Do not apply any plant-protection product close to harvest without checking the label, permitted crop use and pre-harvest interval. Follow label instructions and consult your KVK or qualified agronomist for local recommendations. Since methi is consumed as a leafy vegetable, residue discipline is especially important.

Harvest, bunch and market the crop quickly

Harvest to match the buyer’s preferred bunch size. Restaurants may want clean, tender, uniform leaves. Wholesale markets may accept larger bunches, but rough packing causes leaf heating and yellowing.

After cutting, keep methi out of direct sun. Shake off loose soil, remove damaged leaves and make loose bunches without crushing stems. If washing is required by the buyer, use clean water and drain thoroughly before packing. Do not pack wet leaves tightly in non-ventilated bags.

Record each cutting for every bed: sowing date, harvest date, labour used, number of bunches, buyer feedback and visible crop condition. After two or three cycles, these notes show whether your chosen cutting interval is genuinely profitable in your market.

Next steps

Mark the sowing date on every bed and inspect plant height from day 22 onward. Take the first cut only after plants are well anchored, then schedule the next cut from actual regrowth rather than a fixed calendar date. Keep separate sowing blocks so your market receives leaves each week.

If you are planning a new protected leafy-greens unit, compare net, fittings and structure components before finalising the layout. You can build a material kit and view this week’s item rates or browse individual protected-cultivation materials for the parts required by your farm design.

Frequently asked questions

How many cuttings can I take from methi in a nethouse?

Most healthy leafy methi crops give two to three good cuttings. A fourth cut is possible when the crop remains tender and has not started bolting, but it is often less uniform and may not justify the labour.

At what height should methi be cut for regrowth?

Cut methi about 3–5 cm above the soil surface. This leaves the lower crown and growing points intact, which supports faster and more even regrowth.

Why is my methi not regrowing after the first cutting?

Common reasons are cutting too close to the soil, waterlogging, nutrient depletion, dense planting or root-zone disease. Check the crown, drainage and soil moisture before adding more fertiliser.

Can methi be harvested every week in a nethouse?

A single bed normally cannot be cut every week without weakening it. For weekly sales, sow separate blocks at 7–10 day intervals and harvest each block according to its own regrowth stage.

Should I irrigate immediately after harvesting methi?

Give a light irrigation after harvest if the root zone is dry, then maintain even moisture during regrowth. Avoid heavy flooding because cut plants and shallow roots are sensitive to poorly aerated soil.

Build your kit